On outbound calls that are Long Distance the call rings and then after 30 seconds or so it appears that the trunk gets direction to hang-up the call. I’m not sure if there is a supervision setting for the trunk or not - see below log for a sample call flow - your help is appreciated
– Executing Macro(“SIP/101-b7613500”, “dialout-trunk|1|1612xxxxxx||”) in new stack
– Executing Set(“SIP/101-b7613500”, “DIAL_TRUNK=1”) in new stack
– Executing Set(“SIP/101-b7613500”, “_NODEST=”) in new stack
– Executing Set(“SIP/101-b7613500”, “DIAL_NUMBER=1612xxxxxxx”) in new stack
– Executing Set(“SIP/101-b7613500”, “ROUTE_PASSWD=”) in new stack
– Executing Set(“SIP/101-b7613500”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?noauth”) in new stack
– Goto (macro-dialout-trunk,s,8)
– Executing Set(“SIP/101-b7613500”, “GROUP()=OUT_1”) in new stack
– Executing Macro(“SIP/101-b7613500”, “user-callerid|SKIPTTL”) in new stack
– Executing NoOp(“SIP/101-b7613500”, “user-callerid: device 101”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?report”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?start”) in new stack
– Executing Set(“SIP/101-b7613500”, “REALCALLERIDNUM=101”) in new stack
– Executing NoOp(“SIP/101-b7613500”, “REALCALLERIDNUM is 101”) in new stack
– Executing Set(“SIP/101-b7613500”, “AMPUSER=101”) in new stack
– Executing Set(“SIP/101-b7613500”, “AMPUSERCIDNAME=Keith Layton”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?report”) in new stack
– Executing Set(“SIP/101-b7613500”, “CALLERID(all)=Keith Layton <101>”) in new stack
– Executing Set(“SIP/101-b7613500”, “REALCALLERIDNUM=101”) in new stack
– Executing NoOp(“SIP/101-b7613500”, “TTL: ARG1: SKIPTTL”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,21)
– Executing NoOp(“SIP/101-b7613500”, “Using CallerID “Keith Layton” <101>”) in new stack
– Executing Macro(“SIP/101-b7613500”, “record-enable|101|OUT”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?2:4”) in new stack
– Goto (macro-record-enable,s,4)
– Executing DeadAGI(“SIP/101-b7613500”, “recordingcheck|20070315-163750|1173994670.11518”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20070315-163750|1173994670.11518: Outbound recording not enabled
– AGI Script recordingcheck completed, returning 0
– Executing NoOp(“SIP/101-b7613500”, “No recording needed”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?skipoutcid”) in new stack
– Executing Set(“SIP/101-b7613500”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
– Executing Macro(“SIP/101-b7613500”, “outbound-callerid|1”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?start”) in new stack
– Goto (macro-outbound-callerid,s,3)
– Executing NoOp(“SIP/101-b7613500”, “REALCALLERIDNUM is 101”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?normcid”) in new stack
– Goto (macro-outbound-callerid,s,9)
– Executing Set(“SIP/101-b7613500”, “USEROUTCID=”) in new stack
– Executing Set(“SIP/101-b7613500”, “EMERGENCYCID=”) in new stack
– Executing Set(“SIP/101-b7613500”, “TRUNKOUTCID=“Datotel” <3142419101>”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?trunkcid”) in new stack
– Goto (macro-outbound-callerid,s,16)
– Executing GotoIf(“SIP/101-b7613500”, “0?usercid”) in new stack
– Executing Set(“SIP/101-b7613500”, “CALLERID(all)=“Datotel” <3142419101>”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?report”) in new stack
– Goto (macro-outbound-callerid,s,22)
– Executing NoOp(“SIP/101-b7613500”, “CallerID set to “Datotel” <3142419101>”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?nomax”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?chanfull”) in new stack
– Executing DeadAGI(“SIP/101-b7613500”, “fixlocalprefix”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
– AGI Script fixlocalprefix completed, returning 0
– Executing Set(“SIP/101-b7613500”, “OUTNUM=1612xxxxxxx”) in new stack
– Executing Set(“SIP/101-b7613500”, “custom=ZAP/g1”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “0?customtrunk”) in new stack
– Executing Dial(“SIP/101-b7613500”, “ZAP/g1/1612xxxxxxx|300|tr”) in new stack
– Requested transfer capability: 0x00 - SPEECH
– Called g1/1612xxxxxxx
– Zap/2-1 is proceeding passing it to SIP/101-b7613500
– PROGRESS with cause code 127 received
– Zap/2-1 is making progress passing it to SIP/101-b7613500
– Channel 0/2, span 1 got hangup request
– Hungup ‘Zap/2-1’
== No one is available to answer at this time (1:0/0/0)
– Executing Goto(“SIP/101-b7613500”, “s-NOANSWER|1”) in new stack
– Goto (macro-dialout-trunk,s-NOANSWER,1)
– Executing NoOp(“SIP/101-b7613500”, “Dial failed due to trunk reporting NOANSWER - giving up”) in new stack
– Executing PlayTones(“SIP/101-b7613500”, “congestion”) in new stack
– Executing Congestion(“SIP/101-b7613500”, “20”) in new stack
== Spawn extension (macro-dialout-trunk, s-NOANSWER, 3) exited non-zero on ‘SIP/101-b7613500’ in macro ‘dialout-trunk’
== Spawn extension (macro-dialout-trunk, s-NOANSWER, 3) exited non-zero on ‘SIP/101-b7613500’
– Executing Macro(“SIP/101-b7613500”, “hangupcall”) in new stack
– Executing ResetCDR(“SIP/101-b7613500”, “w”) in new stack
– Executing NoCDR(“SIP/101-b7613500”, “”) in new stack
– Executing GotoIf(“SIP/101-b7613500”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing GotoIf(“SIP/101-b7613500”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing Wait(“SIP/101-b7613500”, “5”) in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/101-b7613500’ in macro ‘hangupcall’
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/101-b7613500’