Hi all.
My AsteriskNow box has an analog handset using an interface board and then a SIP connection to the outside world. It had been working fine until i ran a yum update on the box as part of an attempt to install OSLEC (missing kernel source, so nothing ever compiled/changed).
I lost dialtone on the handset and ran dahdi_cfg and dahdi_genconf, etc. I finally copied chan_dahdi.conf.template to (the nonexistent filename) chan_dahdi.conf. I regained dialtone and incoming calls ring on the handset.
Outgoing calls, however, are routed right back to the extension.
Here is the log from the CLI:
Verbosity is at least 26
– Starting simple switch on ‘DAHDI/2-1’
– Executing [91NNNYYYZZZZ@from-pstn:1] NoOp(“DAHDI/2-1”, “Catch-All DID Match - Found 91NNNYYYZZZZ - You probably want a DID for this.”) in new stack
– Executing [91NNNYYYZZZZ@from-pstn:2] Goto(“DAHDI/2-1”, “ext-did,s,1”) in new stack
– Goto (ext-did,s,1)
– Executing [s@ext-did:1] Set(“DAHDI/2-1”, “__FROM_DID=s”) in new stack
– Executing [s@ext-did:2] Gosub(“DAHDI/2-1”, “app-blacklist-check,s,1()”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“DAHDI/2-1”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:2] Set(“DAHDI/2-1”, “CALLED_BLACKLIST=1”) in new stack
– Executing [s@app-blacklist-check:3] Return(“DAHDI/2-1”, “”) in new stack
– Executing [s@ext-did:3] Set(“DAHDI/2-1”, “CDR(did)=s”) in new stack
– Executing [s@ext-did:4] ExecIf(“DAHDI/2-1”, “0 ?Set(CALLERID(name)=100)”) in new stack
– Executing [s@ext-did:5] Set(“DAHDI/2-1”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
– Executing [s@ext-did:6] Set(“DAHDI/2-1”, “CALLERPRES()=allowed_not_screened”) in new stack
– Executing [s@ext-did:7] Set(“DAHDI/2-1”, “FAX_DEST=ext-fax^100^1”) in new stack
– Executing [s@ext-did:8] Answer(“DAHDI/2-1”, “”) in new stack
– Executing [s@ext-did:9] Wait(“DAHDI/2-1”, “4”) in new stack
– Executing [s@ext-did:10] Goto(“DAHDI/2-1”, “from-did-direct,100,1”) in new stack
– Goto (from-did-direct,100,1)
– Executing [100@from-did-direct:1] Set(“DAHDI/2-1”, “__RINGTIMER=15”) in new stack
– Executing [100@from-did-direct:2] Macro(“DAHDI/2-1”, “exten-vm,100,100,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“DAHDI/2-1”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“DAHDI/2-1”, “AMPUSER=100”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“DAHDI/2-1”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“DAHDI/2-1”, “1?Set(REALCALLERIDNUM=100)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“DAHDI/2-1”, “AMPUSER=100”) in new stack
– Executing [s@macro-user-callerid:5] Set(“DAHDI/2-1”, “AMPUSERCIDNAME=100”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“DAHDI/2-1”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“DAHDI/2-1”, “AMPUSERCID=100”) in new stack
– Executing [s@macro-user-callerid:8] Set(“DAHDI/2-1”, “CALLERID(all)=“100” <100>”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“DAHDI/2-1”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:10] ExecIf(“DAHDI/2-1”, “0?Set(GROUP(concurrency_limit)=100)”) in new stack
– Executing [s@macro-user-callerid:11] ExecIf(“DAHDI/2-1”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“DAHDI/2-1”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:13] Set(“DAHDI/2-1”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“DAHDI/2-1”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,25)
– Executing [s@macro-user-callerid:25] Set(“DAHDI/2-1”, “CALLERID(number)=100”) in new stack
– Executing [s@macro-user-callerid:26] Set(“DAHDI/2-1”, “CALLERID(name)=100”) in new stack
– Executing [s@macro-exten-vm:2] Set(“DAHDI/2-1”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“DAHDI/2-1”, “__EXTTOCALL=100”) in new stack
– Executing [s@macro-exten-vm:4] Set(“DAHDI/2-1”, “__PICKUPMARK=100”) in new stack
– Executing [s@macro-exten-vm:5] Set(“DAHDI/2-1”, “RT=15”) in new stack
– Executing [s@macro-exten-vm:6] Gosub(“DAHDI/2-1”, “sub-record-check,s,1(exten,100,)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“DAHDI/2-1”, “1?check”) in new stack
– Goto (sub-record-check,s,3)
– Executing [s@sub-record-check:3] Set(“DAHDI/2-1”, “MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:4] GotoIf(“DAHDI/2-1”, “1?next”) in new stack
– Goto (sub-record-check,s,7)
– Executing [s@sub-record-check:7] ExecIf(“DAHDI/2-1”, “0?Return()”) in new stack
– Executing [s@sub-record-check:8] GotoIf(“DAHDI/2-1”, “0?exten,1”) in new stack
– Executing [s@sub-record-check:9] Set(“DAHDI/2-1”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:10] ExecIf(“DAHDI/2-1”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [s@sub-record-check:11] Set(“DAHDI/2-1”, “NOW=1349102574”) in new stack
– Executing [s@sub-record-check:12] Set(“DAHDI/2-1”, “__DAY=01”) in new stack
– Executing [s@sub-record-check:13] Set(“DAHDI/2-1”, “__MONTH=10”) in new stack
– Executing [s@sub-record-check:14] Set(“DAHDI/2-1”, “__YEAR=2012”) in new stack
– Executing [s@sub-record-check:15] Set(“DAHDI/2-1”, “__TIMESTR=20121001-104254”) in new stack
– Executing [s@sub-record-check:16] Set(“DAHDI/2-1”, “__FROMEXTEN=100”) in new stack
– Executing [s@sub-record-check:17] Set(“DAHDI/2-1”, “__CALLFILENAME=exten-100-100-20121001-104254-1349102562.5”) in new stack
– Executing [s@sub-record-check:18] Goto(“DAHDI/2-1”, “exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] GotoIf(“DAHDI/2-1”, “0?callee”) in new stack
– Executing [exten@sub-record-check:2] Set(“DAHDI/2-1”, “__REC_POLICY_MODE=”) in new stack
– Executing [exten@sub-record-check:3] GotoIf(“DAHDI/2-1”, “0?caller”) in new stack
– Executing [exten@sub-record-check:4] GotoIf(“DAHDI/2-1”, “1?callee”) in new stack
– Goto (sub-record-check,exten,8)
– Executing [exten@sub-record-check:8] GosubIf(“DAHDI/2-1”, “0?record,1(exten,100,100)”) in new stack
– Executing [exten@sub-record-check:9] Return(“DAHDI/2-1”, “”) in new stack
– Executing [s@macro-exten-vm:7] Macro(“DAHDI/2-1”, “dial-one,15,tr,100”) in new stack
– Executing [s@macro-dial-one:1] Set(“DAHDI/2-1”, “DEXTEN=100”) in new stack
– Executing [s@macro-dial-one:2] Set(“DAHDI/2-1”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“DAHDI/2-1”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“DAHDI/2-1”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“DAHDI/2-1”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“DAHDI/2-1”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“DAHDI/2-1”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“DAHDI/2-1”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“DAHDI/2-1”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,23)
– Executing [s@macro-dial-one:23] GotoIf(“DAHDI/2-1”, “1?next3:continue”) in new stack
– Goto (macro-dial-one,s,24)
– Executing [s@macro-dial-one:24] ExecIf(“DAHDI/2-1”, “1?Set(DIALSTATUS_CW=BUSY)”) in new stack
– Executing [s@macro-dial-one:25] GotoIf(“DAHDI/2-1”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“DAHDI/2-1”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“DAHDI/2-1”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“DAHDI/2-1”, “DEVICES=100”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“DAHDI/2-1”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“DAHDI/2-1”, “0?Set(DEVICES=00)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“DAHDI/2-1”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“DAHDI/2-1”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“DAHDI/2-1”, “THISDIAL=ZAP/2”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“DAHDI/2-1”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“DAHDI/2-1”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“DAHDI/2-1”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“DAHDI/2-1”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“DAHDI/2-1”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“DAHDI/2-1”, “THISPART2=ZAP/2”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“DAHDI/2-1”, “1?Set(THISPART2=DAHDI/2)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“DAHDI/2-1”, “NEWDIAL=DAHDI/2&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“DAHDI/2-1”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“DAHDI/2-1”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“DAHDI/2-1”, “THISDIAL=DAHDI/2”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“DAHDI/2-1”, “”) in new stack
– Executing [dstring@macro-dial-one:9] Set(“DAHDI/2-1”, “DSTRING=DAHDI/2&”) in new stack
– Executing [dstring@macro-dial-one:10] Set(“DAHDI/2-1”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:11] GotoIf(“DAHDI/2-1”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:12] Set(“DAHDI/2-1”, “DSTRING=DAHDI/2”) in new stack
– Executing [dstring@macro-dial-one:13] Return(“DAHDI/2-1”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“DAHDI/2-1”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“DAHDI/2-1”, “1?skiptrace”) in new stack
– Goto (macro-dial-one,s,30)
– Executing [s@macro-dial-one:30] Set(“DAHDI/2-1”, “D_OPTIONS=tr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“DAHDI/2-1”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“DAHDI/2-1”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“DAHDI/2-1”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“DAHDI/2-1”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:35] Set(“DAHDI/2-1”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“DAHDI/2-1”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“DAHDI/2-1”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] Dial(“DAHDI/2-1”, “DAHDI/2,15,tr”) in new stack
== Everyone is busy/congested at this time (1:1/0/0)
– Executing [s@macro-dial-one:39] ExecIf(“DAHDI/2-1”, “1?Set(DIALSTATUS=BUSY)”) in new stack
– Executing [s@macro-dial-one:40] GosubIf(“DAHDI/2-1”, “0?s-BUSY,1()”) in new stack
– Executing [s@macro-dial-one:41] MacroExit(“DAHDI/2-1”, “”) in new stack
– Executing [s@macro-exten-vm:8] Set(“DAHDI/2-1”, “SV_DIALSTATUS=BUSY”) in new stack
– Executing [s@macro-exten-vm:9] GosubIf(“DAHDI/2-1”, “0?docfu,1()”) in new stack
– Executing [s@macro-exten-vm:10] GosubIf(“DAHDI/2-1”, “0?docfb,1()”) in new stack
– Executing [s@macro-exten-vm:11] Set(“DAHDI/2-1”, “DIALSTATUS=BUSY”) in new stack
– Executing [s@macro-exten-vm:12] ExecIf(“DAHDI/2-1”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:13] GotoIf(“DAHDI/2-1”, “0?s-BUSY,1”) in new stack
– Executing [s@macro-exten-vm:14] Macro(“DAHDI/2-1”, “vm,100,BUSY,”) in new stack
– Executing [s@macro-vm:1] Macro(“DAHDI/2-1”, “user-callerid,SKIPTTL”) in new stack
– Executing [s@macro-user-callerid:1] Set(“DAHDI/2-1”, “AMPUSER=100”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“DAHDI/2-1”, “3?report”) in new stack
– Goto (macro-user-callerid,s,12)
– Executing [s@macro-user-callerid:12] GotoIf(“DAHDI/2-1”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,25)
– Executing [s@macro-user-callerid:25] Set(“DAHDI/2-1”, “CALLERID(number)=100”) in new stack
– Executing [s@macro-user-callerid:26] Set(“DAHDI/2-1”, “CALLERID(name)=100”) in new stack
– Executing [s@macro-vm:2] Set(“DAHDI/2-1”, “VMGAIN=”"") in new stack
– Executing [s@macro-vm:3] Macro(“DAHDI/2-1”, “blkvm-check,”) in new stack
– Executing [s@macro-blkvm-check:1] Set(“DAHDI/2-1”, “GOSUB_RETVAL=”) in new stack
– Executing [s@macro-blkvm-check:2] ExecIf(“DAHDI/2-1”, “0?Set(GOSUB_RETVAL=TRUE)”) in new stack
– Executing [s@macro-blkvm-check:3] MacroExit(“DAHDI/2-1”, “”) in new stack
– Executing [s@macro-vm:4] GotoIf(“DAHDI/2-1”, “1?vmx,1”) in new stack
– Goto (macro-vm,vmx,1)
– Executing [vmx@macro-vm:1] Set(“DAHDI/2-1”, “MEXTEN=100”) in new stack
– Executing [vmx@macro-vm:2] Set(“DAHDI/2-1”, “MMODE=BUSY”) in new stack
– Executing [vmx@macro-vm:3] Set(“DAHDI/2-1”, “RETVM=”) in new stack
– Executing [vmx@macro-vm:4] Set(“DAHDI/2-1”, “MODE=busy”) in new stack
– Executing [vmx@macro-vm:5] GotoIf(“DAHDI/2-1”, “1?chknomsg”) in new stack
– Goto (macro-vm,vmx,8)
– Executing [vmx@macro-vm:8] GotoIf(“DAHDI/2-1”, “0?s-BUSY,1”) in new stack
– Executing [vmx@macro-vm:9] GotoIf(“DAHDI/2-1”, “1?notdirect”) in new stack
– Goto (macro-vm,vmx,11)
– Executing [vmx@macro-vm:11] NoOp(“DAHDI/2-1”, "Checking if ext 100 is enabled: ") in new stack
– Executing [vmx@macro-vm:12] GotoIf(“DAHDI/2-1”, “1?s-BUSY,1”) in new stack
– Goto (macro-vm,s-BUSY,1)
– Executing [s-BUSY@macro-vm:1] NoOp(“DAHDI/2-1”, “BUSY voicemail”) in new stack
– Executing [s-BUSY@macro-vm:2] Macro(“DAHDI/2-1”, “get-vmcontext,100”) in new stack
– Executing [s@macro-get-vmcontext:1] Set(“DAHDI/2-1”, “VMCONTEXT=default”) in new stack
– Executing [s@macro-get-vmcontext:2] GotoIf(“DAHDI/2-1”, “0?200:300”) in new stack
– Goto (macro-get-vmcontext,s,300)
– Executing [s@macro-get-vmcontext:300] NoOp(“DAHDI/2-1”, “”) in new stack
– Executing [s-BUSY@macro-vm:3] VoiceMail(“DAHDI/2-1”, “100@default,b”) in new stack
– <DAHDI/2-1> Playing ‘vm-theperson.ulaw’ (language ‘en’)
– <DAHDI/2-1> Playing ‘digits/1.ulaw’ (language ‘en’)
– <DAHDI/2-1> Playing ‘digits/0.ulaw’ (language ‘en’)
– <DAHDI/2-1> Playing ‘digits/0.ulaw’ (language ‘en’)
– <DAHDI/2-1> Playing ‘vm-isonphone.ulaw’ (language ‘en’)
– <DAHDI/2-1> Playing ‘vm-intro.ulaw’ (language ‘en’)
== Spawn extension (macro-vm, s-BUSY, 3) exited non-zero on ‘DAHDI/2-1’ in macro ‘vm’
== Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘DAHDI/2-1’ in macro ‘exten-vm’
== Spawn extension (from-did-direct, 100, 2) exited non-zero on ‘DAHDI/2-1’
– Executing [h@from-did-direct:1] Macro(“DAHDI/2-1”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“DAHDI/2-1”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] Hangup(“DAHDI/2-1”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on ‘DAHDI/2-1’ in macro ‘hangupcall’
== Spawn extension (from-did-direct, h, 1) exited non-zero on ‘DAHDI/2-1’
– Hungup ‘DAHDI/2-1’
> doing dnsmgr_lookup for ‘sip.flowroute.com’
> ast_get_srv: SRV lookup for ‘_sip._udp.sip.flowroute.com’ mapped to host sip-nv1.flowroute.com, port 5060
PhoneSystem*CLI>
My dialplan is setup to require a leading 9 (i.e. 9, 1 areacode, number)
Any thoughts on what I’m doing wrong?
Andrew