Hi
did some use the ECT (Explicit Call Transfer) ? if yes what is the corect procedure to use this functionality.
Best Regards
George Sand
Hi
The question is that if is working with EUROISND switches ? if yes what is the corect procedure , what to pun in the front of a Dial ?
I need this procedure for that the telco to bridge 2 external calls.
Best Regards
George Sand
Hi
and here is my debug trace
span: 2 Adding facility ie contents to send in FACILITY message:
PRI Span: 2 ASN.1 dump
PRI Span: 2 Context Specific/C [1 0x01] Len:11 <0B>
PRI Span: 2 Integer(2 0x02) <02> Len:1 <01>
PRI Span: 2 <1F> - "~"
PRI Span: 2 OID(6 0x06) <06> Len:6 <06>
PRI Span: 2 <04 00 82 71 01 04> - "~q"
PRI Span: 2 ASN.1 end
PRI Span: 2 INVOKE Component Context Specific/C [1 0x01]
PRI Span: 2 invokeId Integer(2 0x02) = 31 0x001F
PRI Span: 2 operationValue OID(6 0x06) = 4.0.369.1.4
PRI Span: 2 operationValue = ROSE_ETSI_EctLinkIdRequest
PRI Span: 2
PRI Span: 2 > DL-DATA request
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 TEI=0 Transmitting N(S)=70, window is open V(A)=70 K=7
PRI Span: 2
PRI Span: 2 > TEI: 0 State 7(Multi-frame established)
PRI Span: 2 > V(A)=70, V(S)=70, V®=34
PRI Span: 2 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 > T200_id=0, N200=3, T203_id=147456
PRI Span: 2 > [ 00 01 8c 44 08 02 b2 13 62 1c 0e 91 a1 0b 02 01 1f 06 06 04 00 82 71 01 04 ]
PRI Span: 2 > Informational frame:
PRI Span: 2 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 > TEI: 000 EA: 1
PRI Span: 2 > N(S): 070 0: 0
PRI Span: 2 > N®: 034 P: 0
PRI Span: 2 > 21 bytes of data
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 > [1c 0e 91 a1 0b 02 01 1f 06 06 04 00 82 71 01 04]
PRI Span: 2 > Facility (len=16, codeset=0) [ 0x91, 0xA1, 0x0B, 0x02, 0x01, 0x1F, 0x06, 0x06, 0x04, 0x00, 0x82, ‘q’, 0x01, 0x04 ]
PRI Span: 2 – Stopping T203 timer
PRI Span: 2 – Starting T200 timer
PRI Span: 2 Adding facility ie contents to send in FACILITY message:
PRI Span: 2 ASN.1 dump
PRI Span: 2 Context Specific/C [1 0x01] Len:35 <23>
PRI Span: 2 Integer(2 0x02) <02> Len:1 <01>
PRI Span: 2 <20> - " "
PRI Span: 2 OID(6 0x06) <06> Len:6 <06>
PRI Span: 2 <04 00 82 71 01 05> - "~q"
PRI Span: 2 Sequence/C(48 0x30) <30> Len:22 <16>
PRI Span: 2 Enumerated(10 0x0A) <0A> Len:1 <01>
PRI Span: 2 <01> - "~"
PRI Span: 2 Context Specific/C [0 0x00] Len:17 <11>
PRI Span: 2 Context Specific/C [1 0x01] Len:15 <0F>
PRI Span: 2 Enumerated(10 0x0A) <0A> Len:1 <01>
PRI Span: 2 <02> - "~"
PRI Span: 2 Numeric String(18 0x12) <12> Len:10 <0A>
PRI Span: 2 <30 37 35 37 31 30 37 31-38 30> - "0757107180"
PRI Span: 2 ASN.1 end
PRI Span: 2 INVOKE Component Context Specific/C [1 0x01]
PRI Span: 2 invokeId Integer(2 0x02) = 32 0x0020
PRI Span: 2 operationValue OID(6 0x06) = 4.0.369.1.5
PRI Span: 2 operationValue = ROSE_ETSI_EctInform
PRI Span: 2 EctInform Sequence/C(48 0x30)
PRI Span: 2 callStatus Enumerated(10 0x0A) = 1 0x0001
PRI Span: 2 redirectionNumber PresentedNumberUnscreened
PRI Span: 2 Explicit Context Specific/C [0 0x00]
PRI Span: 2 presentationAllowedNumber PartyNumber
PRI Span: 2 publicPartyNumber Context Specific/C [1 0x01]
PRI Span: 2 typeOfNumber Enumerated(10 0x0A) = 2 0x0002
PRI Span: 2 numberDigits Numeric String(18 0x12) = "0757107180"
PRI Span: 2
PRI Span: 2 > DL-DATA request
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=45
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 69/0x45) (Sent from originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 TEI=0 Transmitting N(S)=71, window is open V(A)=70 K=7
PRI Span: 2
PRI Span: 2 > TEI: 0 State 7(Multi-frame established)
PRI Span: 2 > V(A)=70, V(S)=71, V®=34
PRI Span: 2 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 > T200_id=147456, N200=3, T203_id=0
PRI Span: 2 > [ 00 01 8e 44 08 02 00 45 62 1c 26 91 a1 23 02 01 20 06 06 04 00 82 71 01 05 30 16 0a 01 01 a0 11 a1 0f 0a 01 02 12 0a 30 37 35 37 31 30 37 31 38 30 ]
PRI Span: 2 > Informational frame:
PRI Span: 2 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 > TEI: 000 EA: 1
PRI Span: 2 > N(S): 071 0: 0
PRI Span: 2 > N®: 034 P: 0
PRI Span: 2 > 45 bytes of data
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=45
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 69/0x45) (Sent from originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 > [1c 26 91 a1 23 02 01 20 06 06 04 00 82 71 01 05 30 16 0a 01 01 a0 11 a1 0f 0a 01 02 12 0a 30 37 35 37 31 30 37 31 38 30]
PRI Span: 2 > Facility (len=40, codeset=0) [ 0x91, 0xA1, ‘#’, 0x02, 0x01, ’ ', 0x06, 0x06, 0x04, 0x00, 0x82, ‘q’, 0x01, 0x05, ‘0’, 0x16, 0x0A, 0x01, 0x01, 0xA0, 0x11, 0xA1, 0x0F, 0x0A, 0x01, 0x02, 0x12, 0x0A, ‘0757107180’ ]
– Native bridging DAHDI/i2/0757107180-16b and DAHDI/i2/0761577860-16c
PRI Span: 2 Adding facility ie contents to send in FACILITY message:
PRI Span: 2 ASN.1 dump
PRI Span: 2 Context Specific/C [1 0x01] Len:11 <0B>
== Spawn extension (test-outbound, 0761577860, 2) exited non-zero on ‘SIP/9999-0000000c’
PRI Span: 2 Integer(2 0x02) <02> Len:1 <01>
PRI Span: 2 <21> - "!"
PRI Span: 2 OID(6 0x06) <06> Len:6 <06>
PRI Span: 2 <04 00 82 71 01 04> - "~q"
PRI Span: 2 ASN.1 end
PRI Span: 2 INVOKE Component Context Specific/C [1 0x01]
PRI Span: 2 invokeId Integer(2 0x02) = 33 0x0021
PRI Span: 2 operationValue OID(6 0x06) = 4.0.369.1.4
PRI Span: 2 operationValue = ROSE_ETSI_EctLinkIdRequest
PRI Span: 2
PRI Span: 2 > DL-DATA request
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 TEI=0 Transmitting N(S)=72, window is open V(A)=70 K=7
PRI Span: 2
PRI Span: 2 > TEI: 0 State 7(Multi-frame established)
PRI Span: 2 > V(A)=70, V(S)=72, V®=34
PRI Span: 2 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 > T200_id=147456, N200=3, T203_id=0
PRI Span: 2 > [ 00 01 90 44 08 02 b2 13 62 1c 0e 91 a1 0b 02 01 21 06 06 04 00 82 71 01 04 ]
PRI Span: 2 > Informational frame:
PRI Span: 2 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 > TEI: 000 EA: 1
PRI Span: 2 > N(S): 072 0: 0
PRI Span: 2 > N®: 034 P: 0
PRI Span: 2 > 21 bytes of data
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 > [1c 0e 91 a1 0b 02 01 21 06 06 04 00 82 71 01 04]
PRI Span: 2 > Facility (len=16, codeset=0) [ 0x91, 0xA1, 0x0B, 0x02, 0x01, ‘!’, 0x06, 0x06, 0x04, 0x00, 0x82, ‘q’, 0x01, 0x04 ]
PRI Span: 2 Adding facility ie contents to send in FACILITY message:
PRI Span: 2 ASN.1 dump
PRI Span: 2 Context Specific/C [1 0x01] Len:18 <12>
PRI Span: 2 Integer(2 0x02) <02> Len:1 <01>
PRI Span: 2 <22> - “”"
PRI Span: 2 OID(6 0x06) <06> Len:6 <06>
PRI Span: 2 <04 00 82 71 01 05> - "~q"
PRI Span: 2 Sequence/C(48 0x30) <30> Len:5 <05>
PRI Span: 2 Enumerated(10 0x0A) <0A> Len:1 <01>
PRI Span: 2 <01> - "~“
PRI Span: 2 Context Specific [2 0x02] <82> Len:0 <00>
PRI Span: 2 ASN.1 end
PRI Span: 2 INVOKE Component Context Specific/C [1 0x01]
PRI Span: 2 invokeId Integer(2 0x02) = 34 0x0022
PRI Span: 2 operationValue OID(6 0x06) = 4.0.369.1.5
PRI Span: 2 operationValue = ROSE_ETSI_EctInform
PRI Span: 2 EctInform Sequence/C(48 0x30)
PRI Span: 2 callStatus Enumerated(10 0x0A) = 1 0x0001
PRI Span: 2 redirectionNumber PresentedNumberUnscreened
PRI Span: 2 numberNotAvailableDueToInterworking Context Specific [2 0x02]
PRI Span: 2
PRI Span: 2 > DL-DATA request
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=28
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 TEI=0 Transmitting N(S)=73, window is open V(A)=70 K=7
PRI Span: 2
PRI Span: 2 > TEI: 0 State 7(Multi-frame established)
PRI Span: 2 > V(A)=70, V(S)=73, V®=34
PRI Span: 2 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 > T200_id=147456, N200=3, T203_id=0
PRI Span: 2 > [ 00 01 92 44 08 02 b2 13 62 1c 15 91 a1 12 02 01 22 06 06 04 00 82 71 01 05 30 05 0a 01 01 82 00 ]
PRI Span: 2 > Informational frame:
PRI Span: 2 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 > TEI: 000 EA: 1
PRI Span: 2 > N(S): 073 0: 0
PRI Span: 2 > N®: 034 P: 0
PRI Span: 2 > 28 bytes of data
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=28
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 > [1c 15 91 a1 12 02 01 22 06 06 04 00 82 71 01 05 30 05 0a 01 01 82 00]
PRI Span: 2 > Facility (len=23, codeset=0) [ 0x91, 0xA1, 0x12, 0x02, 0x01, '”’, 0x06, 0x06, 0x04, 0x00, 0x82, ‘q’, 0x01, 0x05, ‘0’, 0x05, 0x0A, 0x01, 0x01, 0x82, 0x00 ]
– Native bridging DAHDI/i2/0757107180-16b and DAHDI/i2/0761577860-16c
PRI Span: 2 Adding facility ie contents to send in FACILITY message:
PRI Span: 2 ASN.1 dump
PRI Span: 2 Context Specific/C [1 0x01] Len:11 <0B>
PRI Span: 2 Integer(2 0x02) <02> Len:1 <01>
PRI Span: 2 <23> - "#"
PRI Span: 2 OID(6 0x06) <06> Len:6 <06>
PRI Span: 2 <04 00 82 71 01 04> - "~q"
PRI Span: 2 ASN.1 end
PRI Span: 2 INVOKE Component Context Specific/C [1 0x01]
PRI Span: 2 invokeId Integer(2 0x02) = 35 0x0023
PRI Span: 2 operationValue OID(6 0x06) = 4.0.369.1.4
PRI Span: 2 operationValue = ROSE_ETSI_EctLinkIdRequest
PRI Span: 2
PRI Span: 2 > DL-DATA request
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 TEI=0 Transmitting N(S)=74, window is open V(A)=70 K=7
PRI Span: 2
PRI Span: 2 > TEI: 0 State 7(Multi-frame established)
PRI Span: 2 > V(A)=70, V(S)=74, V®=34
PRI Span: 2 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 > T200_id=147456, N200=3, T203_id=0
PRI Span: 2 > [ 00 01 94 44 08 02 b2 13 62 1c 0e 91 a1 0b 02 01 23 06 06 04 00 82 71 01 04 ]
PRI Span: 2 > Informational frame:
PRI Span: 2 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 > TEI: 000 EA: 1
PRI Span: 2 > N(S): 074 0: 0
PRI Span: 2 > N®: 034 P: 0
PRI Span: 2 > 21 bytes of data
PRI Span: 2 > Protocol Discriminator: Q.931 (8) len=21
PRI Span: 2 > TEI=0 Call Ref: len= 2 (reference 12819/0x3213) (Sent to originator)
PRI Span: 2 > Message Type: FACILITY (98)
PRI Span: 2 > [1c 0e 91 a1 0b 02 01 23 06 06 04 00 82 71 01 04]
PRI Span: 2 > Facility (len=16, codeset=0) [ 0x91, 0xA1, 0x0B, 0x02, 0x01, ‘#’, 0x06, 0x06, 0x04, 0x00, 0x82, ‘q’, 0x01, 0x04 ]
PRI Span: 2
PRI Span: 2 < TEI: 0 State 7(Multi-frame established)
PRI Span: 2 < V(A)=70, V(S)=75, V®=34
PRI Span: 2 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 < T200_id=147456, N200=3, T203_id=0
PRI Span: 2 < [ 00 01 01 8e ]
PRI Span: 2 < Supervisory frame:
PRI Span: 2 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 < TEI: 000 EA: 1
PRI Span: 2 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 2 < N®: 071 P/F: 0
PRI Span: 2 < 0 bytes of data
PRI Span: 2 – Got ACK for N(S)=70 to (but not including) N(S)=71
PRI Span: 2 – ACKing N(S)=70, tx_queue head is N(S)=71 (-1 is empty, -2 is not transmitted)
PRI Span: 2 – Restarting T200 timer
PRI Span: 2 Done handling message for SAPI/TEI=0/0
PRI Span: 2
PRI Span: 2 < TEI: 0 State 7(Multi-frame established)
PRI Span: 2 < V(A)=71, V(S)=75, V®=34
PRI Span: 2 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 < T200_id=147456, N200=3, T203_id=0
PRI Span: 2 < [ 00 01 01 90 ]
PRI Span: 2 < Supervisory frame:
PRI Span: 2 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 < TEI: 000 EA: 1
PRI Span: 2 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 2 < N®: 072 P/F: 0
PRI Span: 2 < 0 bytes of data
PRI Span: 2 – Got ACK for N(S)=71 to (but not including) N(S)=72
PRI Span: 2 – ACKing N(S)=71, tx_queue head is N(S)=72 (-1 is empty, -2 is not transmitted)
PRI Span: 2 – Restarting T200 timer
PRI Span: 2 Done handling message for SAPI/TEI=0/0
PRI Span: 2
PRI Span: 2 < TEI: 0 State 7(Multi-frame established)
PRI Span: 2 < V(A)=72, V(S)=75, V®=34
PRI Span: 2 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 < T200_id=147456, N200=3, T203_id=0
PRI Span: 2 < [ 00 01 01 92 ]
PRI Span: 2 < Supervisory frame:
PRI Span: 2 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 < TEI: 000 EA: 1
PRI Span: 2 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 2 < N®: 073 P/F: 0
PRI Span: 2 < 0 bytes of data
PRI Span: 2 – Got ACK for N(S)=72 to (but not including) N(S)=73
PRI Span: 2 – ACKing N(S)=72, tx_queue head is N(S)=73 (-1 is empty, -2 is not transmitted)
PRI Span: 2 – Restarting T200 timer
PRI Span: 2 Done handling message for SAPI/TEI=0/0
PRI Span: 2
PRI Span: 2 < TEI: 0 State 7(Multi-frame established)
PRI Span: 2 < V(A)=73, V(S)=75, V®=34
PRI Span: 2 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 < T200_id=147456, N200=3, T203_id=0
PRI Span: 2 < [ 00 01 01 94 ]
PRI Span: 2 < Supervisory frame:
PRI Span: 2 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 < TEI: 000 EA: 1
PRI Span: 2 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 2 < N®: 074 P/F: 0
PRI Span: 2 < 0 bytes of data
PRI Span: 2 – Got ACK for N(S)=73 to (but not including) N(S)=74
PRI Span: 2 – ACKing N(S)=73, tx_queue head is N(S)=74 (-1 is empty, -2 is not transmitted)
PRI Span: 2 – Restarting T200 timer
PRI Span: 2 Done handling message for SAPI/TEI=0/0
PRI Span: 2
PRI Span: 2 < TEI: 0 State 7(Multi-frame established)
PRI Span: 2 < V(A)=74, V(S)=75, V®=34
PRI Span: 2 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 2 < T200_id=147456, N200=3, T203_id=0
PRI Span: 2 < [ 00 01 01 96 ]
PRI Span: 2 < Supervisory frame:
PRI Span: 2 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 2 < TEI: 000 EA: 1
PRI Span: 2 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 2 < N®: 075 P/F: 0
PRI Span: 2 < 0 bytes of data
PRI Span: 2 – Got ACK for N(S)=74 to (but not including) N(S)=75
PRI Span: 2 – ACKing N(S)=74, tx_queue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
PRI Span: 2 – Stopping T200 timer
PRI Span: 2 – Starting T203 timer
PRI Span: 2 Done handling message for SAPI/TEI=0/0
Hi all,
it looks like the issue comes form the provider or he is not allowing me to use the functionality ECT, or is somenthing missing from my input source.
Best Regards
George Sand