Error 503 after dial sip->unistim

Asterisk Asterisk Support
1

Hello

I’ve been configuring an asterisk-now system to be able to use a lot of nortel i200x phones that are stored in a few boxes.

So far I’ve been successfully reached some milestones, all nortel/unistim phones that I’ve configured worked perfectly. Then I configured some sip phones (basically some cellphones with voip app) that also worked very well.

All seemed to be working great. I was able to make calls between sip phones. Calls between unistim phones also worked like a charm. Calling from a unistim phone to a sip phone also worked without any kind of problems. But when I try to make a call from a sip phone to a unistim one for some reason that I don’t seem to understand it doesn’t work.
I checked the log on the cellphone and I get the the error 503 (that I know that is service unavailable) during method INVITE from the number I’m trying to call - 201@192.168.1.100

I think I’m missing some configuration on asterisk/freepbx but I have no idea what it could be.

Any kind of help would be much appreciated.

this is asterisk log of the call:

[2012-03-06 17:09:39] VERBOSE[16175] chan_sip.c: -- Registered SIP '205' at 192.168.1.9:5060 [2012-03-06 17:09:39] NOTICE[16175] chan_sip.c: Peer '205' is now Reachable. (68ms / 2000ms) [2012-03-06 17:09:43] VERBOSE[16175] netsock2.c: == Using SIP RTP TOS bits 184 [2012-03-06 17:09:43] VERBOSE[16175] netsock2.c: == Using SIP RTP CoS mark 5 [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [201@from-internal:1] Set("SIP/205-00000000", "__RINGTIMER=15") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [201@from-internal:2] Macro("SIP/205-00000000", "exten-vm,novm,201,0,0,0") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:1] Macro("SIP/205-00000000", "user-callerid,") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:1] Set("SIP/205-00000000", "AMPUSER=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/205-00000000", "0?report") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/205-00000000", "1?Set(REALCALLERIDNUM=205)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:4] Set("SIP/205-00000000", "AMPUSER=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:5] Set("SIP/205-00000000", "AMPUSERCIDNAME=movel") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/205-00000000", "0?report") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:7] Set("SIP/205-00000000", "AMPUSERCID=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:8] Set("SIP/205-00000000", "CALLERID(all)="movel" <205>") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:9] GotoIf("SIP/205-00000000", "0?limit") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/205-00000000", "0?Set(GROUP(concurrency_limit)=205)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/205-00000000", "0?continue") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:12] Set("SIP/205-00000000", "__TTL=64") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:13] GotoIf("SIP/205-00000000", "1?continue") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (macro-user-callerid,s,24) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:24] Set("SIP/205-00000000", "CALLERID(number)=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:25] Set("SIP/205-00000000", "CALLERID(name)=movel") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-user-callerid:26] Set("SIP/205-00000000", "CHANNEL(language)=en") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:2] Set("SIP/205-00000000", "RingGroupMethod=none") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:3] Set("SIP/205-00000000", "__EXTTOCALL=201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:4] Set("SIP/205-00000000", "__PICKUPMARK=201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:5] Set("SIP/205-00000000", "RT=") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:6] Gosub("SIP/205-00000000", "sub-record-check,s,1(exten,201,)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:1] GotoIf("SIP/205-00000000", "1?check") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (sub-record-check,s,3) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:3] Set("SIP/205-00000000", "MON_FMT=wav") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:4] GotoIf("SIP/205-00000000", "1?next") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (sub-record-check,s,7) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:7] ExecIf("SIP/205-00000000", "0?Return()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:8] GotoIf("SIP/205-00000000", "0?exten,1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:9] Set("SIP/205-00000000", "__REC_STATUS=INITIALIZED") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:10] ExecIf("SIP/205-00000000", "0?Set(__REC_POLICY_MODE=)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:11] Set("SIP/205-00000000", "NOW=1331053783") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:12] Set("SIP/205-00000000", "__DAY=06") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:13] Set("SIP/205-00000000", "__MONTH=03") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:14] Set("SIP/205-00000000", "__YEAR=2012") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:15] Set("SIP/205-00000000", "__TIMESTR=20120306-170943") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:16] Set("SIP/205-00000000", "__FROMEXTEN=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:17] Set("SIP/205-00000000", "__CALLFILENAME=exten-201-205-20120306-170943-1331053783.22") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@sub-record-check:18] Goto("SIP/205-00000000", "exten,1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (sub-record-check,exten,1) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:1] GotoIf("SIP/205-00000000", "0?callee") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:2] Set("SIP/205-00000000", "__REC_POLICY_MODE=dontcare") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:3] GotoIf("SIP/205-00000000", "1?caller") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (sub-record-check,exten,10) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:10] Set("SIP/205-00000000", "REC_POLICY_MODE=dontcare") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:11] GosubIf("SIP/205-00000000", "0?record,1(exten,201,205)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [exten@sub-record-check:12] Return("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:7] Macro("SIP/205-00000000", "dial-one,,tr,201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:1] Set("SIP/205-00000000", "DEXTEN=201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:2] Set("SIP/205-00000000", "DIALSTATUS_CW=") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:3] GosubIf("SIP/205-00000000", "0?screen,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:4] GosubIf("SIP/205-00000000", "0?cf,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:5] GotoIf("SIP/205-00000000", "1?skip1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (macro-dial-one,s,8) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:8] GotoIf("SIP/205-00000000", "0?nodial") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:9] GotoIf("SIP/205-00000000", "0?continue") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:10] Set("SIP/205-00000000", "EXTHASCW=ENABLED") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:11] GotoIf("SIP/205-00000000", "0?next1:cwinusebusy") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (macro-dial-one,s,23) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:23] GotoIf("SIP/205-00000000", "1?next3:continue") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (macro-dial-one,s,24) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:24] ExecIf("SIP/205-00000000", "0?Set(DIALSTATUS_CW=BUSY)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:25] GotoIf("SIP/205-00000000", "0?nodial") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:26] GosubIf("SIP/205-00000000", "1?dstring,1():dlocal,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:1] Set("SIP/205-00000000", "DSTRING=") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:2] Set("SIP/205-00000000", "DEVICES=201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:3] ExecIf("SIP/205-00000000", "0?Return()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:4] ExecIf("SIP/205-00000000", "0?Set(DEVICES=01)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:5] Set("SIP/205-00000000", "LOOPCNT=1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:6] Set("SIP/205-00000000", "ITER=1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:7] Set("SIP/205-00000000", "THISDIAL=CUSTOM/201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:8] GosubIf("SIP/205-00000000", "1?zap2dahdi,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/205-00000000", "0?Return()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/205-00000000", "NEWDIAL=") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/205-00000000", "LOOPCNT2=1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/205-00000000", "ITER2=1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/205-00000000", "THISPART2=CUSTOM/201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/205-00000000", "0?Set(THISPART2=DAHDITOM/201)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/205-00000000", "NEWDIAL=CUSTOM/201&") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/205-00000000", "ITER2=2") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/205-00000000", "0?begin2") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/205-00000000", "THISDIAL=CUSTOM/201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:9] Set("SIP/205-00000000", "DSTRING=CUSTOM/201&") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:10] Set("SIP/205-00000000", "ITER=2") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:11] GotoIf("SIP/205-00000000", "0?begin") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:12] Set("SIP/205-00000000", "DSTRING=CUSTOM/201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [dstring@macro-dial-one:13] Return("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:27] GotoIf("SIP/205-00000000", "0?nodial") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:28] GotoIf("SIP/205-00000000", "0?skiptrace") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:29] GosubIf("SIP/205-00000000", "1?ctset,1():ctclear,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [ctset@macro-dial-one:1] Set("SIP/205-00000000", "DB(CALLTRACE/201)=205") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [ctset@macro-dial-one:2] Return("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:30] Set("SIP/205-00000000", "D_OPTIONS=tr") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:31] ExecIf("SIP/205-00000000", "0?SIPAddHeader(Alert-Info: )") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:32] ExecIf("SIP/205-00000000", "0?SIPAddHeader()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:33] ExecIf("SIP/205-00000000", "0?Set(CHANNEL(musicclass)=)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:34] GosubIf("SIP/205-00000000", "0?qwait,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:35] Set("SIP/205-00000000", "__CWIGNORE=") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:36] Set("SIP/205-00000000", "__KEEPCID=TRUE") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:37] GotoIf("SIP/205-00000000", "0?usegoto,1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:38] GotoIf("SIP/205-00000000", "0?godial") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:39] Set("SIP/205-00000000", "CONNECTEDLINE(name,i)=Asterisk 201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:40] Set("SIP/205-00000000", "CONNECTEDLINE(num)=201") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:41] Set("SIP/205-00000000", "D_OPTIONS=trI") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:42] Dial("SIP/205-00000000", "CUSTOM/201,,trI") in new stack [2012-03-06 17:09:43] WARNING[16251] channel.c: No channel type registered for 'CUSTOM' [2012-03-06 17:09:43] WARNING[16251] app_dial.c: Unable to create channel of type 'CUSTOM' (cause 66 - Channel not implemented) [2012-03-06 17:09:43] VERBOSE[16251] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:43] ExecIf("SIP/205-00000000", "0?Set(DIALSTATUS=)") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:44] GosubIf("SIP/205-00000000", "0?s-CHANUNAVAIL,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-dial-one:45] MacroExit("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:8] Set("SIP/205-00000000", "SV_DIALSTATUS=CHANUNAVAIL") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:9] GosubIf("SIP/205-00000000", "0?docfu,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:10] GosubIf("SIP/205-00000000", "0?docfb,1()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:11] Set("SIP/205-00000000", "DIALSTATUS=CHANUNAVAIL") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:12] ExecIf("SIP/205-00000000", "0?MacroExit()") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s@macro-exten-vm:13] GotoIf("SIP/205-00000000", "1?s-CHANUNAVAIL,1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Goto (macro-exten-vm,s-CHANUNAVAIL,1) [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf("SIP/205-00000000", "0?exit,1") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones("SIP/205-00000000", "congestion") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion("SIP/205-00000000", "10") in new stack [2012-03-06 17:09:43] VERBOSE[16251] app_macro.c: == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on 'SIP/205-00000000' in macro 'exten-vm' [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: == Spawn extension (from-internal, 201, 2) exited non-zero on 'SIP/205-00000000' [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: -- Executing [h@from-internal:1] Hangup("SIP/205-00000000", "") in new stack [2012-03-06 17:09:43] VERBOSE[16251] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/205-00000000' [2012-03-06 17:09:53] VERBOSE[16175] chan_sip.c: -- Unregistered SIP '205'

There are these 2 warnings:
[2012-03-06 17:09:43] WARNING[16251] channel.c: No channel type registered for ‘CUSTOM’
[2012-03-06 17:09:43] WARNING[16251] app_dial.c: Unable to create channel of type ‘CUSTOM’ (cause 66 - Channel not implemented)
don’t know if they are important.

I’m using asterisk 1.8.10.1 and freepbx ari 2.10.0.0 and fop 2.10.0.2

2

Ok, I’ve managed to find one error on one of the configuration fields.
The extension field “dial” was configured has “CUSTOM/201” and I’ve corrected it to “USTM/201”

But I still can’t call from sip phones to unistim. The updated log error is:

[2012-03-07 11:19:06] VERBOSE[24020] pbx.c: -- Executing [s@macro-dial-one:42] Dial("SIP/205-00000003", "USTM/201,,trI") in new stack [2012-03-07 11:19:06] NOTICE[24020] chan_unistim.c: Asked to get a channel of format ulaw while capability is 0xc (ulaw|alaw) result : ulaw [2012-03-07 11:19:06] NOTICE[24020] chan_unistim.c: Device '201' has no @ (at) sign! [2012-03-07 11:19:06] NOTICE[24020] chan_unistim.c: No available lines on: 201 [2012-03-07 11:19:06] WARNING[24020] app_dial.c: Unable to create channel of type 'USTM' (cause 34 - Circuit/channel congestion)

This is unistim.conf:

[code][general]
port=5000 ; UDP port

;-------------------Extensions configuration---------------------------------------------------

;Extenção 201

[201] ; name of the device
device=006038dd3512 ; mac address of the phone
;tn=201
maintext0=“Teste Asterisk #1” ; default = “Welcome”, 24 characters max
;maintext1=“a custom text” ; default = the name of the device, 24 characters max
;maintext2="(main page)" ; default = the public IP of the phone, 24 characters max
callerid=“Unistim 201” <201>
context=default ; context, default="default"
mailbox=200 ; Specify the mailbox number. Used by Message Waiting Indication
linelabel=“201” ; Softkey label for the next line=> entry, 9 char max.
rtp_port=10000 ; RTP port used by the phone, default = 10000. RTCP = rtp_port+1
rtp_method=3 ; If you don’t have sound, you can try 1, 2 or 3, default = 0
status_method=0 ; If you don’t see status text, try 1, default = 0
titledefault=Asterisk ; default = “TimeZone (your time zone)”. 12 characters max
extension=line ; Add an extension into the dialplan. Only valid in context specified previously.
; none=don’t add (default), ask=prompt user, line=use the line number
dateformat=1 ; 0 = month/day, 1 (default) = day/month
timeformat=0 ; 0 = 0:00am ; 1 (default) = 0h00, 2 = 0:00
contrast=8 ; define the contrast of the LCD. From 0 to 15. Default = 8
country=pt ; country (ccTLD) for dial tone frequency. See README, default = us
ringvolume=3 ; ring volume : 0,1,2,3, can be overrided by Dial(), default = 2
ringstyle=2 ; ring style : 0 to 7, can be overrided by Dial(), default = 3
callhistory=1 ; 0 = disable, 1 = enable call history, default = 1
line => 201 ; Only one line by device is currently supported.
; Beware ! only bookmark and softkey entries are allowed after line=>
bookmark=#2@202 ; Use a softkey to dial 123. Name : 9 char max
bookmark=#3@203 ; 54 shows a mailbox icon. See #define FAV_ICON_ for other values (32 to 63)
bookmark=#3@203 ; Display an icon if violet is connected (dynamic), only for unistim device
;bookmark=name@exten ; Display a pager icon and dial 54321 when softkey 4 is pressed
[/code]

3

Fixed it :smiley:

On asterisk cli I ran “unistim show info” and the output was:

[code]Dumping internal structures :
device
->line
–>sub

name=201 id=00xxxxxxxxxx line=0x93ba640 ha=(nil) sess=0x93d9730 device=0x93ba380
->name=201 fullname=USTM/201@201 exten= callid=“Unistim 201” <201> cap=12 device=0x93ba380 line=0x93ba640
–>subtype=0 chan=(nil) rtp=(nil) bridge=0xffffffd6 line=0x93ba640 alreadygone=0

Sessions:
sin=192.168.1.101 timeout=3988037044 state=2 macaddr=00xxxxxxxxxx device=0x93ba380 session=0x93d9730[/code]

after editing the dial field on the freebpx extension configuration like the fullname string above it started working perfectly.

I hope that this info would come in handy in the future to help others.

4

thank you
very full info

have you work out away to fix the number on the Nortel phones
i2004 always asks for terminal number - I had to set provisioning to tn mode to get phone to work