Hi forum
Installed a genuine Digium TDM400P, and Asterisk 11. Also dadhi packages.
BUT can’t get TDM400P analog card working.
Hardware is detected by lspci
01:06.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Hardware is detected by dahdi_hardware
pci:0000:01:06.0 wctdm- e159:0001 Wildcard TDM400P REV I
Dahdi kernel modules are loaded, lsmod | grep dahdi
dahdi_transcode 6697 1 wctc4xxp
dahdi_voicebus 54834 2 wctdm24xxp,wcte12xp
dahdi 224730 18 xpp,dahdi_transcode,wcb4xxp,rcbfx,wctdm,wcfxo,wcaxx,wctdm24xxp,rxt1,r1t1,wcte11xp,wct1xxp,wcte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x
crc_ccitt 1717 2 wctdm24xxp,dahdi
Further investigation reveals the following :
dahdi_genconf
Empty configuration – no spans
Empty configuration – no spans
Empty configuration – no spans
dmesg | grep dahdi
dahdi: Version: 2.10.0.1
dahdi: Telephony Interface Registered on major 196
dahdi: Warning: Span WCTDM/4 didn’t specify a spantype. Please fix driver!
dahdi: disable_span: span 1
dahdi_transcode: Loaded.
Please for any advice to get this Digium card working.
Do I need some other driver/s ?
TIA’s
