Hi,
I am using the TrixBox 2.6 and E1 board and Airtel PRI line. I am facing issue for dialing some of the numbers not all. When I am dialing mobile number from my sofphone it will work fine. But, When I am dialing land line number it is not dialing and showing the Circuit busy message. Mobile number length is 10 digits and land line number length is usually 6 digits. Only local land line number is not able to dial but when I dial std land line number with std code than it is working.
Can you please help me; what I missing in Asterisk or DAHDI configuration or this is the Airtel Service Provide issue.
See the below log for the dialing land line number, failed to dial
Executing [s@macro-dialout-trunk:19] Dial(“SIP/202-000000ab”, “DAHDI/g0/7553040,300,”) in new stack
– Requested transfer capability: 0x00 - SPEECH
– Called g0/7553040
– DAHDI/1-1 is proceeding passing it to SIP/202-000000ab
– Channel 0/1, span 1 got hangup request, cause 28
– Hungup ‘DAHDI/1-1’
Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp(“SIP/202-000000ab”, “TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 28) - failing through to other trunks”) in new stack
See the below log for dialing mobile number is working fine
Executing [s@macro-dialout-trunk:19] Dial(“SIP/202-000000ae”, “DAHDI/g0/9898478989,300,”) in new stack
– Requested transfer capability: 0x00 - SPEECH
– Called g0/9898478989
– DAHDI/2-1 is proceeding passing it to SIP/202-000000ae
– DAHDI/2-1 is ringing
– DAHDI/2-1 answered SIP/202-000000ae
Thanks in Advance.
Regards,
Ketan