Hello Everyone,
After a long time I am having problem in setting up auto-dialing.
Astguiclient VERSION: 2.0.5-151 BUILD: 81119-0715
Asterisk VERSION: Asterisk 1.2.24
When the agent logs in, he recieves a call on his X-Lite. He picks up the call and then he listens to a message “You are the only person in this conference”.
Asterisk CLI:
== Manager ‘sendcron’ logged off from 127.0.0.1
Channel SIP/1161-081aaa20 was answered.
– Executing MeetMe(“SIP/1161-081aaa20”, “8600051”) in new stack
== Parsing ‘/etc/asterisk/meetme.conf’: Found
– Created MeetMe conference 1023 for conference ‘8600051’
– Playing ‘conf-onlyperson’ (language ‘en’)
== Manager ‘sendcron’ logged off from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
When he press resumes, the server starts dialing but he doesn’t recieve any answered call though on CLI it shows the call was answered. Then CLI shows the following NOTICE:
Nov 20 23:20:55 NOTICE[6327]: app_meetme.c:2210 admin_exec: Conference Number not found
TIME ON VDAD real time shows only calls are ringing even they were answered. I have checked each and everything many times but didn’t see any bit of it out of place.
Here is one complete call CLI output:
== Manager ‘sendcron’ logged on from 127.0.0.1
Channel SIP/1161-0819c1e0 was answered.
– Executing MeetMe(“SIP/1161-0819c1e0”, “8600051”) in new stack
== Parsing ‘/etc/asterisk/meetme.conf’: Found
– Created MeetMe conference 1023 for conference ‘8600051’
– Playing ‘conf-onlyperson’ (language ‘en’)
== Manager ‘sendcron’ logged off from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing AGI(“Local/9912486471433@default-6298,2”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing Dial(“Local/9912486471433@default-6298,2”, “SIP/912486471433@inx||tTo”) in new stack
– Called 912486471433@inx
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing AGI(“Local/9912485936893@default-e0c3,2”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing Dial(“Local/9912485936893@default-e0c3,2”, “SIP/912485936893@inx||tTo”) in new stack
– Called 912485936893@inx
– SIP/inx-081ca690 is ringing
– SIP/inx-081dd3a0 is ringing
– Remote UNIX connection
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
– SIP/inx-081dd3a0 answered Local/9912485936893@default-e0c3,2
Channel Local/9912485936893@default-e0c3,1 was answered.
== Manager ‘sendcron’ logged off from 127.0.0.1
– Executing AGI(“Local/9912485936893@default-e0c3,1”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing AGI(“Local/9912485936893@default-e0c3,1”, “agi-VDADtransfer.agi|8365”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
– AGI Script agi-VDADtransfer.agi completed, returning 0
– Executing AGI(“Local/9912485936893@default-e0c3,1”, “agi-VDADtransfer.agi|8365”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
– AGI Script agi-VDADtransfer.agi completed, returning 0
– Executing AGI(“Local/9912485936893@default-e0c3,1”, “agi-VDADtransfer.agi|8365”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
– AGI Script agi-VDADtransfer.agi completed, returning 0
– Executing Hangup(“Local/9912485936893@default-e0c3,1”, “”) in new stack
== Spawn extension (default, 8365, 5) exited non-zero on ‘Local/9912485936893@default-e0c3,1’
– Executing DeadAGI(“Local/9912485936893@default-e0c3,1”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------)”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ----------) completed, returning 0
== Spawn extension (default, 9912485936893, 2) exited non-zero on ‘Local/9912485936893@default-e0c3,2’
– Executing DeadAGI(“Local/9912485936893@default-e0c3,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16-----ANSWER-----34-----0)”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … --34-----0) completed, returning 0
– Executing Hangup(“Local/9912486471433@default-6298,2”, “”) in new stack
== Spawn extension (default, 9912486471433, 3) exited non-zero on ‘Local/9912486471433@default-6298,2’
– Executing DeadAGI(“Local/9912486471433@default-6298,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----34-----CONGESTION----------)”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ----------) completed, returning 0
== Manager ‘sendcron’ logged off from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing MeetMeAdmin(“Local/55558600051@default-c6e0,2”, “8600051|K”) in new stack
– Hungup ‘Zap/pseudo-1235948744’
== Spawn extension (default, 8600051, 1) exited non-zero on ‘SIP/1161-0819c1e0’
== Parsing ‘/etc/asterisk/meetme.conf’: – Executing DeadAGI(“SIP/1161-0819c1e0”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------)”) in new stack
Foundmauto*CLI>
Nov 23 14:31:43 NOTICE[26209]: app_meetme.c:2210 admin_exec: Conference Number not found
– Executing Hangup(“Local/55558600051@default-c6e0,2”, “”) in new stack
== Spawn extension (default, 55558600051, 2) exited non-zero on ‘Local/55558600051@default-c6e0,2’
– Executing DeadAGI(“Local/55558600051@default-c6e0,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------)”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ----------) completed, returning 0
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ----------) completed, returning 0
== Manager ‘sendcron’ logged off from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
Here is my screen -r output:
screen -r
There are several suitable screens on:
3229.ASTVDadapt (Detached)
3226.ASTVDremote (Detached)
3220.ASTlisten (Detached)
3217.ASTsend (Detached)
3214.ASTupdate (Detached)
3086.asterisk (Detached)
3223.ASTVDauto (Detached)
3232.ASTfastlog (Detached)
Type “screen [-d] -r [pid.]tty.host” to resume one of them.
I copied the configuration from the samples files. This server is for outbound calls only so I removed all the inbound config. Here is my extension.conf now.
[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp
TRUNKX=SIP
[default]
; barge monitoring extension
exten => 8159,1,ZapBarge
exten => 8159,2,Hangup
; # timeout invalid rules
exten => #,1,Playback(invalid) ; “Thanks for trying the demo”
exten => #,2,Hangup ; Hang them up.
exten => t,1,Goto(#,1) ; If they take too long, give up
exten => i,1,Playback(invalid) ; “That’s not valid, try again”
; Give voicemail at extension 8500
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)
exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log–HVcauses … EBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})
exten => _9.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9.,2,Dial(SIP/${EXTEN:1}@inx,tTo)
exten => _9.,3,Hangup
; barge monitoring extension
exten => 8159,1,ZapBarge
exten => 8159,2,Hangup
; ZapBarge direct channel extensions
exten => _86120XX,1,ZapBarge(${EXTEN:5})
exten => _X48600XXX,1,MeetMeAdmin(${EXTEN:2},T,${EXTEN:0:1})
exten => _X48600XXX,2,Hangup
exten => _X38600XXX,1,MeetMeAdmin(${EXTEN:2},t,${EXTEN:0:1})
exten => _X38600XXX,2,Hangup
exten => _X28600XXX,1,MeetMeAdmin(${EXTEN:2},m,${EXTEN:0:1})
exten => _X28600XXX,2,Hangup
exten => _X18600XXX,1,MeetMeAdmin(${EXTEN:2},M,${EXTEN:0:1})
exten => _X18600XXX,2,Hangup
exten => _55558600XXX,1,MeetMeAdmin(${EXTEN:4},K)
exten => _55558600XXX,2,Hangup
exten => 8300,1,Hangup
; astGUIclient conferences
exten => _86000[0-4]X,1,Meetme,${EXTEN}|q
; VICIDIAL conferences
exten => _86000[5-9]X,1,Meetme,${EXTEN}|F
exten => _8600[1-2]XX,1,Meetme,${EXTEN}|F
; quiet entry and leaving conferences for VICIDIAL (inbound announce and SendDTMF)
exten => _78600XXX,1,Meetme,${EXTEN:1}|Fq
; quiet monitor-only extensions for meetme rooms (for room managers)
exten => _68600XXX,1,Meetme,${EXTEN:1}|Fmq
; quiet monitor-only entry and leaving conferences for VICIDIAL (recording)
exten => _58600XXX,1,Meetme,${EXTEN:1}|Fmq
; voicelab exten
exten => _86009XX,1,Meetme,${EXTEN}|Fmq
; voicelab exten moderator
exten => _986009XX,1,Meetme,${EXTEN:1}
; park channel for client GUI parking, hangup after 30 minutes
; create a GSM formatted audio file named “park.gsm” that is 30 minutes long
; and put it in /var/lib/asterisk/sounds
exten => 8301,1,Answer
exten => 8301,2,AGI(park_CID.agi)
exten => 8301,3,Playback(park)
exten => 8301,4,Hangup
exten => 8303,1,Answer
exten => 8303,2,AGI(park_CID.agi)
exten => 8303,3,Playback(conf)
exten => 8303,4,Hangup
; park channel for client GUI conferencing, hangup after 30 minutes
; create a GSM formatted audio file named “conf.gsm” that is 30 minutes long
; and put it in /var/lib/asterisk/sounds
exten => 8302,1,Answer
exten => 8302,2,Playback(conf)
exten => 8302,3,Hangup
exten => 8304,1,Answer
exten => 8304,2,Playback(ding)
exten => 8304,3,Hangup
; default audio for safe harbor 2-second-after-hello message then hangup
; create a GSM formatted audio file complies with safe harbor rules
; and put it in /var/lib/asterisk/sounds then change filename below
exten => 8307,1,Answer
exten => 8307,2,Playback(vm-goodbye)
exten => 8307,3,Hangup
; this is used for recording conference calls, the client app sends the filename
; value as a callerID recordings go to /var/spool/asterisk/monitor (WAV)
; Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8309,1,Answer
exten => 8309,2,Monitor(wav,${CALLERIDNAME})
exten => 8309,3,Wait,3600
exten => 8309,4,Hangup
; this is used for recording conference calls, the client app sends the filename
; value as a callerID recordings go to /var/spool/asterisk/monitor (GSM)
; Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8310,1,Answer
exten => 8310,2,Monitor(gsm,${CALLERIDNAME})
exten => 8310,3,Wait,3600
exten => 8310,4,Hangup
; this is used for playing a message to an answering machine forwarded from AMD in VICIDIAL
; replace conf with the message file you want to leave
exten => 8320,1,WaitForSilence(2000,2) ; AMD got machine. leave message after recording
exten => 8320,2,Playback(conf)
exten => 8320,3,AGI(VD_amd_post.agi,${EXTEN})
exten => 8320,4,Hangup
; use for selective CallerID hangup by area code(hard-coded)
exten => 8352,1,AGI(agi-VDADselective_CID_hangup.agi,${EXTEN})
exten => 8352,2,Playback(safe_harbor)
exten => 8352,3,Hangup
; prompts for recording AGI script, ID is 4321
; first variable is format (gsm/wav)
; second variable is timeout in milliseconds (default is 720000 [12 minutes])
exten => 8167,1,Answer
exten => 8167,2,AGI(agi-record_prompts.agi,wav-----720000)
exten => 8167,3,Hangup
exten => 8168,1,Answer
exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----720000)
exten => 8168,3,Hangup
; playback of recorded prompts
exten => _851XXXXX,1,Answer
exten => _851XXXXX,2,Playback(${EXTEN})
exten => _851XXXXX,3,Hangup
; this is used to allow the GUI to send you directly into voicemail
; don’t forget to set GUI variable $voicemail_exten to this extension
exten => 8501,1,VoicemailMain(s${CALLERIDNUM})
exten => 8501,2,Hangup
; this is used to allow the GUI to send live calls directly into voicemail
; don’t forget to set GUI variable $voicemail_dump_exten to this extension
exten => _85026666666666.,1,Wait(1)
exten => _85026666666666.,2,Voicemail(${EXTEN:14}|u)
exten => _85026666666666.,3,Hangup
; this is used for sending DTMF signals within conference calls, the client app
; sends the digits to be played in the callerID field
; sound files must be placed in /var/lib/asterisk/sounds
exten => 8500998,1,Answer
exten => 8500998,2,Playback(silence)
exten => 8500998,3,AGI(agi-dtmf.agi)
exten => 8500998,4,Hangup
;#### VDAD STANDARD TRANSFER ENTRIES ####
; Below are the parameters needed for the agi-VDAD_ALL_outbound.agi script to be run properly
; 1. the method of call handling for the script:
; - NORMAL - Standard outbound routing to agent
; - TEST - For performance testing only
; - BROADCAST - For no-agent broadcast dialing
; - SURVEY - For survery question then on to agent
; - REMINDER - Reminder campaign
; - REMINDX - Reminder with transfer to agent
; 2. the method of searching for an available agent:
; - LB - Load Balance total system
; - LO - Load Balance Overflow only (priority to home server)
; - SO - Home server only
; 3. the sound file to play when doing a SURVEY, REMINDER, REMINDX campaign
; 4. the acceptible dtmf digits for a SURVEY
; 5. the out-opt digit for a SURVEY (must be in the digit map)
; 6. the sound file to play for a SURVEY when transfering to an agent
; 7. the sound file to play for a SURVEY when DNCing the call
; 8. OPTIN or OPTOUT: if OPTIN call is only sent to agent with button press
; if OPTOUT call is sent to agent if no button press at all
; 9. the status that is use for a SURVEY when someone opts out
; if the status is DNC it will also add them to the internal dnc table
; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
exten => 8364,1,Playback(sip-silence)
exten => 8364,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8364,3,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8364,4,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8364,5,Hangup
; VICIDIAL_auto_dialer transfer script:
exten => 8365,1,Playback(sip-silence)
exten => 8365,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8365,3,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----SO)
exten => 8365,4,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----SO)
exten => 8365,5,Hangup
; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
exten => 8366,1,Playback(sip-silence)
exten => 8366,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8366,3,AGI(agi-VDAD_ALL_outbound.agi,SURVEYCAMP-----LB)
exten => 8366,4,AGI(agi-VDAD_ALL_outbound.agi,SURVEYCAMP-----LB)
exten => 8366,5,Hangup
; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
exten => 8367,1,Playback(sip-silence)
exten => 8367,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8367,3,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LO)
exten => 8367,4,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LO)
exten => 8367,5,Hangup
; VICIDIAL_auto_dialer transfer script Load Balanced:
exten => 8368,1,Playback(sip-silence)
exten => 8368,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8368,3,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8368,4,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8368,5,Hangup
; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
exten => 8369,1,Playback(sip-silence)
exten => 8369,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8369,3,AMD(2000|2000|1000|5000|120|50|4|256)
exten => 8369,4,AGI(VD_amd.agi,${EXTEN})
exten => 8369,5,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8369,6,AGI(agi-VDAD_ALL_outbound.agi,NORMAL-----LB)
exten => 8369,7,Hangup
; VICIDIAL auto-dial reminder script
exten => 8372,1,Playback(sip-silence)
exten => 8372,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,5,Hangup
; VICIDIAL SURVEY transfer script AMD with Load Balanced:
exten => 8373,1,Playback(sip-silence)
exten => 8373,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8373,3,AMD(2000|2000|1000|5000|120|50|4|256)
exten => 8373,4,AGI(VD_amd.agi,${EXTEN})
exten => 8373,5,AGI(agi-VDAD_ALL_outbound.agi,SURVEYCAMP-----LB)
exten => 8373,6,AGI(agi-VDAD_ALL_outbound.agi,SURVEYCAMP-----LB)
exten => 8373,7,Hangup
; PERFORMANCE TESTING
exten => _999XXXXXX1,1,Answer
exten => _999XXXXXX1,2,Wait(2)
exten => _999XXXXXX1,3,Playback(beep)
exten => _999XXXXXX1,4,Hangup
exten => _999XX11112,1,Wait(2)
exten => _999XX11112,2,Answer
exten => _999XX11112,3,Playback(ss-noservice)
exten => _999XX11112,4,Playback(vm-goodbye)
exten => _999XX11112,5,Hangup
exten => _999XXXX112,1,Wait(5)
exten => _999XXXX112,2,Answer
exten => _999XXXX112,3,Playback(demo-instruct)
exten => _999XXXX112,4,Playback(demo-instruct)
exten => _999XXXX112,5,Hangup
exten => _999XXXXXX2,1,Wait(
exten => _999XXXXXX2,2,Answer
exten => _999XXXXXX2,3,Playback(demo-instruct)
exten => _999XXXXXX2,4,Hangup
exten => _999XXXXXX3,1,SetVar(PRI_CAUSE=1)
exten => _999XXXXXX3,2,Hangup
exten => _999XXXXXX4,1,SetVar(PRI_CAUSE=27)
exten => _999XXXXXX4,2,Hangup
exten => _999XXXXXX5,1,Wait(60)
exten => _999XXXXXX5,2,Hangup
exten => _999XXXXXX6,1,Wait(10)
exten => _999XXXXXX6,2,Answer
exten => _999XXXXXX6,3,Playback(demo-instruct)
exten => _999XXXXXX6,4,Hangup
exten => _999XXXXXX7,1,Wait(12)
exten => _999XXXXXX7,2,Answer
exten => _999XXXXXX7,3,Playback(demo-enterkeywords)
exten => _999XXXXXX7,4,Hangup
exten => _999XXXXXX8,1,SetVar(PRI_CAUSE=17)
exten => _999XXXXXX8,2,Hangup
exten => _999XXXXXX9,1,Wait(6)
exten => _999XXXXXX9,2,Answer
exten => _999XXXXXX9,3,Playback(demo-abouttotry)
exten => _999XXXXXX9,4,Hangup
exten => _999XXXXXX0,1,Wait(5)
exten => _999XXXXXX0,2,Answer
exten => _999XXXXXX0,3,Playback(vm-goodbye)
exten => _999XXXXXX0,4,Hangup
exten => 99999999999,1,Answer
exten => 99999999999,2,Playback(conf)
exten => 99999999999,3,Playback(conf)
exten => 99999999999,4,Playback(conf)
exten => 99999999999,5,Playback(conf)
exten => 99999999999,6,Playback(conf)
exten => 99999999999,7,Playback(conf)
exten => 99999999999,8,Playback(conf)
exten => 99999999999,9,Playback(conf)
exten => 99999999999,10,Playback(conf)
exten => 99999999999,11,Playback(conf)
exten => 99999999999,12,Playback(conf)
exten => 99999999999,13,Playback(conf)
exten => 99999999999,14,Hangup
I reloaded asterisk and got the same result. Here is CLI output:
== Parsing ‘/etc/asterisk/codecs.conf’: Found
– codec_alaw: using generic PLC
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
Channel SIP/1161-081c3330 was answered.
– Executing MeetMe(“SIP/1161-081c3330”, “8600051|F”) in new stack
== Parsing ‘/etc/asterisk/meetme.conf’: Found
– Created MeetMe conference 1023 for conference ‘8600051’
– Playing ‘conf-onlyperson’ (language ‘en’)
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing AGI(“Local/9912487236686@default-f3f7,2”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing Dial(“Local/9912487236686@default-f3f7,2”, “SIP/912487236686@inx||tTo”) in new stack
– Called 912487236686@inx
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing AGI(“Local/9912485930778@default-2a5f,2”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing Dial(“Local/9912485930778@default-2a5f,2”, “SIP/912485930778@inx||tTo”) in new stack
– Called 912485930778@inx
– SIP/inx-081ed130 is ringing
– SIP/inx-081dc738 is ringing
– SIP/inx-081dc738 answered Local/9912487236686@default-f3f7,2
Channel Local/9912487236686@default-f3f7,1 was answered.
== Manager ‘sendcron’ logged off from 127.0.0.1
– Executing Playback(“Local/9912487236686@default-f3f7,1”, “sip-silence”) in new stack
– Playing ‘sip-silence’ (language ‘en’)
– Executing AGI(“Local/9912487236686@default-f3f7,1”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing AGI(“Local/9912487236686@default-f3f7,1”, “agi-VDAD_ALL_outbound.agi|NORMAL-----SO”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
– AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
– Executing AGI(“Local/9912487236686@default-f3f7,1”, “agi-VDAD_ALL_outbound.agi|NORMAL-----SO”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
– AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
– Executing Hangup(“Local/9912487236686@default-f3f7,1”, “”) in new stack
== Spawn extension (default, 8365, 5) exited non-zero on ‘Local/9912487236686@default-f3f7,1’
– Executing DeadAGI(“Local/9912487236686@default-f3f7,1”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ---------- completed, returning 0
== Spawn extension (default, 9912487236686, 2) exited non-zero on ‘Local/9912487236686@default-f3f7,2’
– Executing DeadAGI(“Local/9912487236686@default-f3f7,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16-----ANSWER-----25-----2”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … --25-----2 completed, returning 0
– Got SIP response 503 “Service Unavailable” back from 10.3.4.30
– SIP/inx-081ed130 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
– Executing Hangup(“Local/9912485930778@default-2a5f,2”, “”) in new stack
== Spawn extension (default, 9912485930778, 3) exited non-zero on ‘Local/9912485930778@default-2a5f,2’
– Executing DeadAGI(“Local/9912485930778@default-2a5f,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----34-----CONGESTION----------”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ---------- completed, returning 0
– Executing AGI(“Local/9912487922087@default-056b,2”, “agi://127.0.0.1:4577/call_log”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
– Executing Dial(“Local/9912487922087@default-056b,2”, “SIP/912487922087@inx||tTo”) in new stack
– Called 912487922087@inx
– SIP/inx-081dc738 is ringing
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
== Parsing ‘/etc/asterisk/manager.conf’: Found
== Manager ‘sendcron’ logged on from 127.0.0.1
– Executing MeetMeAdmin(“Local/55558600051@default-38ed,2”, “8600051|K”) in new stack
– Hungup ‘Zap/pseudo-2137034624’
== Spawn extension (default, 8600051, 1) exited non-zero on ‘SIP/1161-081c3330’
== Parsing ‘/etc/asterisk/meetme.conf’: – Executing DeadAGI(“SIP/1161-081c3330”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------”) in new stack
Foundmauto*CLI>
Nov 23 16:49:33 NOTICE[6795]: app_meetme.c:2210 admin_exec: Conference Number not found
– Executing Hangup(“Local/55558600051@default-38ed,2”, “”) in new stack
== Spawn extension (default, 55558600051, 2) exited non-zero on ‘Local/55558600051@default-38ed,2’
– Executing DeadAGI(“Local/55558600051@default-38ed,2”, “agi://127.0.0.1:4577/call_log–HVcauses–PRI-----NODEBUG-----16---------------”) in new stack
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ---------- completed, returning 0
– AGI Script agi://127.0.0.1:4577/call_log–HVcauses … ---------- completed, returning 0
== Manager ‘sendcron’ logged off from 127.0.0.1
== Manager ‘sendcron’ logged off from 127.0.0.1
Following is the agi-VDAD_all_outbound.agi log output of this call:
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|Perl Environment Dump:
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|0|NORMAL-----SO
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|callerID changed: V1123164807000000029
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|AGI Environment Dump:
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – accountcode =
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – callerid = 0000000000
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – calleridname = V1123164807000000029
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – callingani2 = 0
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – callingpres = 0
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – callingtns = 0
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – callington = 0
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – channel = Local/9912487236686@default-f3f7,1
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – context = default
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – dnid = unknown
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – enhanced = 0.0
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – extension = 8365
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – language = en
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – priority = 3
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – rdnis = unknown
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – request = agi-VDAD_ALL_outbound.agi
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – type = Local
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi| – uniqueid = 1227476887.62
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|AGI Variables: |1227476887.62|Local/9912487236686@default-f3f7,1|8365|Local|V1123164807000000029|V1123164807000000029|3|
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|+++++ VDAD START : |29|2008-11-23 16:48:31|1.2.14|3|
2008-11-23 16:48:31|agi-VDAD_ALL_outbound.agi|+++++ VDAD START LOCAL CHANNEL: EXITING- 3
I have tried with both G729 and G711 u/a but similar results. System CPU is 1.5GHz Quad Core with 2GB RAM. I haven’t tried any other carrier as manual dialing is working perfectly fine with this carrier.
Can anyone please help me find out where did I go wrong. It’ll be highly appreciated. Please let me know if you need anything from my side.
Thanks