Conference bridge disconnects after entering password

Asterisk Asterisk Support
1

Hi, i have 2 PBX boxes integrated each other for multiple reasons in which i am not able to make the conference bridges work. 1 box i use for PRI and other for VoIP Calls.
It all started after I restored the VoIP pbx box on new hardware with the old configuration. Incoming and outgoing are working. Only conference bridges are not working.

PBX1 Log:
PRIbox1CLI>
– Executing [2024@BlockISD:1] Macro(“SIP/6426-00000010”, “exten-vm,novm,2024”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/6426-00000010”, “user-callerid”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/6426-00000010”, “AMPUSER=6426”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/6426-00000010”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/6426-00000010”, “1?Set(REALCALLERIDNUM=6426)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/6426-00000010”, “AMPUSER=6426”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/6426-00000010”, “AMPUSERCIDNAME=Kishore / Janardhan”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/6426-00000010”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/6426-00000010”, “AMPUSERCID=6426”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/6426-00000010”, “CALLERID(all)=“Kishore / Janardhan” <6426>”) in new stack
– Executing [s@macro-user-callerid:9] ExecIf(“SIP/6426-00000010”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:10] GotoIf(“SIP/6426-00000010”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/6426-00000010”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/6426-00000010”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,19)
– Executing [s@macro-user-callerid:19] NoOp(“SIP/6426-00000010”, “Using CallerID “Kishore / Janardhan” <6426>”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/6426-00000010”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/6426-00000010”, “VMBOX=novm”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/6426-00000010”, “EXTTOCALL=2024”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/6426-00000010”, “CFUEXT=”) in new stack
– Executing [s@macro-exten-vm:6] Set(“SIP/6426-00000010”, “CFBEXT=”) in new stack
– Executing [s@macro-exten-vm:7] Set(“SIP/6426-00000010”, “RT=”"") in new stack
– Executing [s@macro-exten-vm:8] Macro(“SIP/6426-00000010”, “record-enable,2024,IN”) in new stack
– Executing [s@macro-record-enable:1] GotoIf(“SIP/6426-00000010”, “1?check”) in new stack
– Goto (macro-record-enable,s,4)
– Executing [s@macro-record-enable:4] AGI(“SIP/6426-00000010”, “recordingcheck,20150207-202214,1423320734.18”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck,20150207-202214,1423320734.18: Inbound recording not enabled
– <SIP/6426-00000010>AGI Script recordingcheck completed, returning 0
– Executing [s@macro-record-enable:5] MacroExit(“SIP/6426-00000010”, “”) in new stack
– Executing [s@macro-exten-vm:9] Macro(“SIP/6426-00000010”, “dial,”",tr,2024") in new stack
– Executing [s@macro-dial:1] GotoIf(“SIP/6426-00000010”, “1?dial”) in new stack
– Goto (macro-dial,s,3)
– Executing [s@macro-dial:3] AGI(“SIP/6426-00000010”, “dialparties.agi”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
dialparties.agi: Caller ID name is ‘Kishore / Janardhan’ number is ‘6426’
> dialparties.agi: USE_CONFIRMATION: ‘FALSE’
> dialparties.agi: RINGGROUP_INDEX: ''
dialparties.agi: Methodology of ring is ‘none’
– dialparties.agi: Added extension 2024 to extension map
– dialparties.agi: Extension 2024 cf is disabled
– dialparties.agi: Extension 2024 do not disturb is disabled
> dialparties.agi: extnum 2024 has: cw: 1; hascfb: 0 [] hascfu: 0 []
dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
– dialparties.agi: dbset CALLTRACE/2024 to 6426
– dialparties.agi: Filtered ARG3: 2024
– <SIP/6426-00000010>AGI Script dialparties.agi completed, returning 0
– Executing [s@macro-dial:7] Dial(“SIP/6426-00000010”, “SIP/2024,”",tr") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
– Called 2024
– SIP/2024-00000011 answered SIP/6426-00000010
– Executing [h@macro-dial:1] Macro(“SIP/6426-00000010”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/6426-00000010”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/6426-00000010”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/6426-00000010”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] Hangup(“SIP/6426-00000010”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/6426-00000010’ in macro ‘hangupcall’
== Spawn extension (macro-dial, h, 1) exited non-zero on ‘SIP/6426-00000010’
== Spawn extension (macro-dial, s, 7) exited non-zero on ‘SIP/6426-00000010’ in macro ‘dial’
== Spawn extension (macro-exten-vm, s, 9) exited non-zero on ‘SIP/6426-00000010’ in macro ‘exten-vm’
== Spawn extension (BlockISD, 2024, 1) exited non-zero on ‘SIP/6426-00000010’
– Executing [h@BlockISD:1] Macro(“SIP/6426-00000010”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/6426-00000010”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/6426-00000010”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/6426-00000010”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] Hangup(“SIP/6426-00000010”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/6426-00000010’ in macro ‘hangupcall’
== Spawn extension (BlockISD, h, 1) exited non-zero on 'SIP/6426-00000010’
Pribox1CLI>

PBX 2 Log:
VoIPbox1CLI>
– Executing [4026@from-pstn:1] Set(“SIP/Test1-00000001”, “__FROM_DID=4026”) in new stack
– Executing [4026@from-pstn:2] Gosub(“SIP/Test1-00000001”, “app-blacklist-check,s,1”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“SIP/Test1-00000001”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:2] Return(“SIP/Test1-00000001”, “”) in new stack
– Executing [4026@from-pstn:3] ExecIf(“SIP/Test1-00000001”, “0 ?Set(CALLERID(name)=6426)”) in new stack
– Executing [4026@from-pstn:4] AGI(“SIP/Test1-00000001”, “/var/www/html/admin/modules/sak/agi/bwlist.agi”) in new stack
– Launched AGI Script /var/www/html/admin/modules/sak/agi/bwlist.agi
– <SIP/Test1-00000001>AGI Script /var/www/html/admin/modules/sak/agi/bwlist.agi completed, returning 0
– Executing [4026@from-pstn:5] Set(“SIP/Test1-00000001”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
– Executing [4026@from-pstn:6] Set(“SIP/Test1-00000001”, “CALLERPRES()=allowed_not_screened”) in new stack
– Executing [4026@from-pstn:7] Goto(“SIP/Test1-00000001”, “ext-meetme,2024,1”) in new stack
– Goto (ext-meetme,2024,1)
– Executing [2024@ext-meetme:1] Macro(“SIP/Test1-00000001”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/Test1-00000001”, “AMPUSER=6426”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/Test1-00000001”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/Test1-00000001”, “1?Set(REALCALLERIDNUM=6426)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/Test1-00000001”, “AMPUSER=”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/Test1-00000001”, “AMPUSERCIDNAME=”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/Test1-00000001”, “1?report”) in new stack
– Goto (macro-user-callerid,s,10)
– Executing [s@macro-user-callerid:10] GotoIf(“SIP/Test1-00000001”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/Test1-00000001”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/Test1-00000001”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,19)
– Executing [s@macro-user-callerid:19] NoOp(“SIP/Test1-00000001”, “Using CallerID “Kishore / Janardhan” <6426>”) in new stack
– Executing [2024@ext-meetme:2] Set(“SIP/Test1-00000001”, “MEETME_ROOMNUM=2024”) in new stack
– Executing [2024@ext-meetme:3] GotoIf(“SIP/Test1-00000001”, “0?READPIN”) in new stack
– Executing [2024@ext-meetme:4] Answer(“SIP/Test1-00000001”, “”) in new stack
– Executing [2024@ext-meetme:5] Wait(“SIP/Test1-00000001”, “1”) in new stack
– Executing [2024@ext-meetme:6] Set(“SIP/Test1-00000001”, “PINCOUNT=0”) in new stack
– Executing [2024@ext-meetme:7] Read(“SIP/Test1-00000001”, “PIN,enter-conf-pin-number,”) in new stack
– <SIP/Test1-00000001> Playing ‘enter-conf-pin-number.ulaw’ (language ‘en’)
– User entered ‘20140218’
– Executing [2024@ext-meetme:8] GotoIf(“SIP/Test1-00000001”, “1?USER”) in new stack
– Goto (ext-meetme,2024,16)
– Executing [2024@ext-meetme:16] Set(“SIP/Test1-00000001”, “MEETME_OPTS=cI”) in new stack
– Executing [2024@ext-meetme:17] Goto(“SIP/Test1-00000001”, “STARTMEETME,1”) in new stack
– Goto (ext-meetme,STARTMEETME,1)
– Executing [STARTMEETME@ext-meetme:1] MeetMe(“SIP/Test1-00000001”, “2024,cI,20140218”) in new stack
== Parsing ‘/etc/asterisk/meetme.conf’: == Found
== Parsing ‘/etc/asterisk/meetme_additional.conf’: == Found
== Spawn extension (ext-meetme, STARTMEETME, 1) exited non-zero on ‘SIP/Test1-00000001’
– Executing [h@ext-meetme:1] Hangup(“SIP/Test1-00000001”, “”) in new stack
== Spawn extension (ext-meetme, h, 1) exited non-zero on 'SIP/Test1-00000001’
VoIPbox1CLI>

Please help.

2

Based on your PBX it seems you are using FreePBX, it is hard to debug the Dial Plan, Check if any configuration file is missing after the restore .

3

We are using Trixbox software. Free edition. I am newbie.
Please find working logs from old server:
Please help

-- Executing [4026@from-pstn:1] Set("SIP/Test1-00000166", "__FROM_DID=4026") in new stack
-- Executing [4026@from-pstn:2] Gosub("SIP/Test1-00000166", "app-blacklist-check,s,1") in new stack
-- Executing [s@app-blacklist-check:1] GotoIf("SIP/Test1-00000166", "0?blacklisted") in new stack
-- Executing [s@app-blacklist-check:2] Return("SIP/Test1-00000166", "") in new stack

-- Executing [4026@from-pstn:3] AGI("SIP/Test1-00000166", "/var/www/html/admin/modules/sak/agi/bwlist.agi") in new stack
-- Launched AGI Script /var/www/html/admin/modules/sak/agi/bwlist.agi
-- <SIP/Test1-00000166>AGI Script /var/www/html/admin/modules/sak/agi/bwlist.agi completed, returning 0
-- Executing [4026@from-pstn:4] ExecIf("SIP/Test1-00000166", "0 ?Set(CALLERID(name)=6426)") in new stack
-- Executing [4026@from-pstn:5] Set("SIP/Test1-00000166", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [4026@from-pstn:6] Set("SIP/Test1-00000166", "CALLERPRES()=allowed_not_screened") in new stack
-- Executing [4026@from-pstn:7] Goto("SIP/Test1-00000166", "ext-meetme,2024,1") in new stack
-- Goto (ext-meetme,2024,1)
-- Executing [2024@ext-meetme:1] Macro("SIP/Test1-00000166", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/Test1-00000166", "AMPUSER=6426") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/Test1-00000166", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/Test1-00000166", "1?Set(REALCALLERIDNUM=6426)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/Test1-00000166", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/Test1-00000166", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/Test1-00000166", "1?report") in new stack
-- Goto (macro-user-callerid,s,10)
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/Test1-00000166", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/Test1-00000166", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/Test1-00000166", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/Test1-00000166", "Using CallerID "Kishore / Janardhan" <6426>") in new stack
-- Executing [2024@ext-meetme:2] Set("SIP/Test1-00000166", "MEETME_ROOMNUM=2024") in new stack
-- Executing [2024@ext-meetme:3] GotoIf("SIP/Test1-00000166", "0?READPIN") in new stack
-- Executing [2024@ext-meetme:4] Answer("SIP/Test1-00000166", "") in new stack
-- Executing [2024@ext-meetme:5] Wait("SIP/Test1-00000166", "1") in new stack
-- Executing [2024@ext-meetme:6] Set("SIP/Test1-00000166", "PINCOUNT=0") in new stack
-- Executing [2024@ext-meetme:7] Read("SIP/Test1-00000166", "PIN,enter-conf-pin-number,,,,") in new stack
-- <SIP/Test1-00000166> Playing 'enter-conf-pin-number.ulaw' (language 'en')
-- User entered '20140218'
-- Executing [2024@ext-meetme:8] GotoIf("SIP/Test1-00000166", "1?USER") in new stack
-- Goto (ext-meetme,2024,16)
-- Executing [2024@ext-meetme:16] Set("SIP/Test1-00000166", "MEETME_OPTS=cI") in new stack
-- Executing [2024@ext-meetme:17] Goto("SIP/Test1-00000166", "STARTMEETME,1") in new stack
-- Goto (ext-meetme,STARTMEETME,1)
-- Executing [STARTMEETME@ext-meetme:1] MeetMe("SIP/Test1-00000166", "2024,cI,20140218") in new stack

== Parsing ‘/etc/asterisk/meetme.conf’: == Found
== Parsing ‘/etc/asterisk/meetme_additional.conf’: == Found
– Created MeetMe conference 1023 for conference ‘2024’
– <SIP/Test1-00000166> Playing ‘conf-onlyperson.gsm’ (language ‘en’)
== Spawn extension (ext-meetme, STARTMEETME, 1) exited non-zero on ‘SIP/Test1-00000166’
– Executing [h@ext-meetme:1] Hangup(“SIP/Test1-00000166”, “”) in new stack
== Spawn extension (ext-meetme, h, 1) exited non-zero on 'SIP/Test1-00000166’
voipserver*CLI>

4

Trixbox is abandonware. It’s developer has ceased all support of the free product and has even closed down the peer support forums that they used to provide.