chan_ss7 | Call failed to go through, reason (3) Remote end

Asterisk Asterisk Support
1

Dear All,

I am trying to launch calls using call files in /var/spool/asterisk/outgoing. Asterisk picks up the call file appropriately and begins placing the call.

And in and getting “Call failed to go through, reason (3) Remote end Ringing” just after ACM, please help me out.

i am using following software versions:
asterisk-1.8.20.1
dahdi-linux-complete-2.6.1
chan_ss7-2.1.0
wanpipe-7.0.0

This is asterisk official forum so my hope of issue resolution is very high, pls do the needfull.

*****Callfile
Channel: SS7/siuc/3002146332
MaxRetries: 0
RetryTime: 20
Callerid: 03002222222
WaitTime: 10
Context: from_siuc
Extension: s
Priority: 1

*****Asterisk CLI Logs
– Attempting call on SS7/siuc/3002146332 for s@from_siuc:1 (Retry 1)
– Sent IAM CIC=34 ANI=03002222222 DNI=3002146332 RNI=
[Apr 3 12:57:38] WARNING[19134]: l4isup.c:5057 l4isup_event: Received ACM (CIC 34), link ‘l1’.
– SS7 hangup ‘SS7/siuc/34’ CIC=34 Cause=0 (state=4)
[Apr 3 12:57:47] NOTICE[21198]: pbx_spool.c:372 attempt_thread: Call failed to go through, reason (3) Remote end Ringing
[Apr 3 12:57:47] NOTICE[21198]: pbx_spool.c:375 attempt_thread: Queued call to SS7/siuc/3002146332 expired without completion after 0 attempts
[Apr 3 12:57:48] WARNING[19134]: l4isup.c:5057 l4isup_event: Received RLC (CIC 34), link ‘l1’.

thanks is advance,
Regards,
shazi

2

This forum isn’t supported by Sangoma people.

Looks to me as though the call rang out, i.e. no-one answered within the allowed time.

3

Thanks david,

i had tested so many time and didn’t get single ringing on any cell phone…

please help me out,

Thanks

4

YOu need to contact Sangoma and/or your network operator. In the latter case it may be that you are provdiing the dialed number in the wrong format and they are sending back Alerting before validating it.