Hi
We are using Cisco 7945/7940/7942 phones with Ast13.8 and freepbx. While we are able to connect all soft phones and 7940/7942 over conference, 7945 reports cannot complete conference.
Any known issues/resolution?
Is this a SIP conference? Otherwise you need to contact the FreePBX people as which conference application they use and how they configure it is decided by them.
Yes, it is. I haev already posted on their forum but i guess this is an asterisk issue. I am pasting below the logs
[BEGIN] 07-04-2016 13:10:09
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [2000@from-internal:1] Set(“SIP/1005-00000010”, “__RINGTIMER=15”) in new stack
– Executing [2000@from-internal:2] Macro(“SIP/1005-00000010”, “exten-vm,novm,2000,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/1005-00000010”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/1005-00000010”, “TOUCH_MONITOR=1460014918.104”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/1005-00000010”, “AMPUSER=1005”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/1005-00000010”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/1005-00000010”, “1?Set(REALCALLERIDNUM=1005)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/1005-00000010”, “AMPUSER=1005”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/1005-00000010”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/1005-00000010”, “AMPUSERCIDNAME=1005”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/1005-00000010”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/1005-00000010”, “AMPUSERCID=1005”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/1005-00000010”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/1005-00000010”, “CALLERID(all)=“1005” <1005>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/1005-00000010”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/1005-00000010”, “0?Set(GROUP(concurrency_limit)=1005)”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/1005-00000010”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:15] Set(“SIP/1005-00000010”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:16] GotoIf(“SIP/1005-00000010”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“SIP/1005-00000010”, “CALLERID(number)=1005”) in new stack
– Executing [s@macro-user-callerid:28] Set(“SIP/1005-00000010”, “CALLERID(name)=1005”) in new stack
– Executing [s@macro-user-callerid:29] Set(“SIP/1005-00000010”, “CDR(cnum)=1005”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/1005-00000010”, “CDR(cnam)=1005”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/1005-00000010”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/1005-00000010”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/1005-00000010”, “__EXTTOCALL=2000”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/1005-00000010”, “__PICKUPMARK=2000”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/1005-00000010”, “RT=”) in new stack
– Executing [s@macro-exten-vm:6] Gosub(“SIP/1005-00000010”, “sub-record-check,s,1(exten,2000,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/1005-00000010”, “0?initialized”) in new stack
– Executing [s@sub-record-check:2] Set(“SIP/1005-00000010”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“SIP/1005-00000010”, “NOW=1460014918”) in new stack
– Executing [s@sub-record-check:4] Set(“SIP/1005-00000010”, “__DAY=07”) in new stack
– Executing [s@sub-record-check:5] Set(“SIP/1005-00000010”, “__MONTH=04”) in new stack
– Executing [s@sub-record-check:6] Set(“SIP/1005-00000010”, “__YEAR=2016”) in new stack
– Executing [s@sub-record-check:7] Set(“SIP/1005-00000010”, “__TIMESTR=20160407-131158”) in new stack
– Executing [s@sub-record-check:8] Set(“SIP/1005-00000010”, “__FROMEXTEN=1005”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/1005-00000010”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:10] NoOp(“SIP/1005-00000010”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“SIP/1005-00000010”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/1005-00000010”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“SIP/1005-00000010”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“SIP/1005-00000010”, “5?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“SIP/1005-00000010”, “1?sub-record-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] NoOp(“SIP/1005-00000010”, “Exten Recording Check between 1005 and 2000”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/1005-00000010”, “CALLTYPE=internal”) in new stack
– Executing [exten@sub-record-check:3] ExecIf(“SIP/1005-00000010”, “0?Set(CALLTYPE=)”) in new stack
– Executing [exten@sub-record-check:4] Set(“SIP/1005-00000010”, “CALLEE=dontcare”) in new stack
– Executing [exten@sub-record-check:5] ExecIf(“SIP/1005-00000010”, “0?Set(CALLEE=dontcare)”) in new stack
– Executing [exten@sub-record-check:6] GotoIf(“SIP/1005-00000010”, “0?callee”) in new stack
– Executing [exten@sub-record-check:7] GotoIf(“SIP/1005-00000010”, “1?caller”) in new stack
– Goto (sub-record-check,exten,13)
– Executing [exten@sub-record-check:13] Set(“SIP/1005-00000010”, “RECMODE=dontcare”) in new stack
– Executing [exten@sub-record-check:14] ExecIf(“SIP/1005-00000010”, “0?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:15] ExecIf(“SIP/1005-00000010”, “1?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:16] Gosub(“SIP/1005-00000010”, “recordcheck,1(dontcare,internal,2000)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“SIP/1005-00000010”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“SIP/1005-00000010”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [exten@sub-record-check:17] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [s@macro-exten-vm:7] GotoIf(“SIP/1005-00000010”, “1?macrodial”) in new stack
– Goto (macro-exten-vm,s,13)
– Executing [s@macro-exten-vm:13] GosubIf(“SIP/1005-00000010”, “0?clrheader,1()”) in new stack
– Executing [s@macro-exten-vm:14] Macro(“SIP/1005-00000010”, “dial-one,Ttr,2000”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/1005-00000010”, “DEXTEN=2000”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/1005-00000010”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/1005-00000010”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/1005-00000010”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/1005-00000010”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/1005-00000010”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/1005-00000010”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/1005-00000010”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/1005-00000010”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,23)
– Executing [s@macro-dial-one:23] GotoIf(“SIP/1005-00000010”, “1?next3:continue”) in new stack
– Goto (macro-dial-one,s,24)
– Executing [s@macro-dial-one:24] ExecIf(“SIP/1005-00000010”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
– Executing [s@macro-dial-one:25] GotoIf(“SIP/1005-00000010”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“SIP/1005-00000010”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/1005-00000010”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/1005-00000010”, “DEVICES=2000”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/1005-00000010”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/1005-00000010”, “0?Set(DEVICES=000)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/1005-00000010”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/1005-00000010”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/1005-00000010”, “THISDIAL=SIP/2000”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/1005-00000010”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/1005-00000010”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/1005-00000010”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/1005-00000010”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/1005-00000010”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/1005-00000010”, “THISPART2=SIP/2000”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/1005-00000010”, “0?Set(THISPART2=DAHDI/2000)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/1005-00000010”, “NEWDIAL=SIP/2000&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/1005-00000010”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/1005-00000010”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/1005-00000010”, “THISDIAL=SIP/2000”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [dstring@macro-dial-one:9] GotoIf(“SIP/1005-00000010”, “1?doset”) in new stack
– Goto (macro-dial-one,dstring,13)
– Executing [dstring@macro-dial-one:13] Set(“SIP/1005-00000010”, “DSTRING=SIP/2000&”) in new stack
– Executing [dstring@macro-dial-one:14] Set(“SIP/1005-00000010”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:15] GotoIf(“SIP/1005-00000010”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:16] ExecIf(“SIP/1005-00000010”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:17] Set(“SIP/1005-00000010”, “DSTRING=SIP/2000”) in new stack
– Executing [dstring@macro-dial-one:18] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“SIP/1005-00000010”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“SIP/1005-00000010”, “0?skiptrace”) in new stack
– Executing [s@macro-dial-one:29] GosubIf(“SIP/1005-00000010”, “1?ctset,1():ctclear,1()”) in new stack
– Executing [ctset@macro-dial-one:1] Set(“SIP/1005-00000010”, “DB(CALLTRACE/2000)=1005”) in new stack
– Executing [ctset@macro-dial-one:2] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [s@macro-dial-one:30] Set(“SIP/1005-00000010”, “D_OPTIONS=Ttr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“SIP/1005-00000010”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“SIP/1005-00000010”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“SIP/1005-00000010”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“SIP/1005-00000010”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:35] Set(“SIP/1005-00000010”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“SIP/1005-00000010”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“SIP/1005-00000010”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] GotoIf(“SIP/1005-00000010”, “0?godial”) in new stack
– Executing [s@macro-dial-one:39] Gosub(“SIP/1005-00000010”, “sub-presencestate-display,s,1(2000)”) in new stack
– Executing [s@sub-presencestate-display:1] Goto(“SIP/1005-00000010”, “state-not_set,1”) in new stack
– Goto (sub-presencestate-display,state-not_set,1)
– Executing [state-not_set@sub-presencestate-display:1] Set(“SIP/1005-00000010”, “PRESENCESTATE_DISPLAY=”) in new stack
– Executing [state-not_set@sub-presencestate-display:2] Return(“SIP/1005-00000010”, “”) in new stack
– Executing [s@macro-dial-one:40] Set(“SIP/1005-00000010”, “CONNECTEDLINE(name,i)=2000”) in new stack
– Executing [s@macro-dial-one:41] Set(“SIP/1005-00000010”, “CONNECTEDLINE(num)=2000”) in new stack
– Executing [s@macro-dial-one:42] Set(“SIP/1005-00000010”, “D_OPTIONS=TtrI”) in new stack
– Executing [s@macro-dial-one:43] Macro(“SIP/1005-00000010”, “dialout-one-predial-hook,”) in new stack
– Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/1005-00000010”, “”) in new stack
– Executing [s@macro-dial-one:44] Dial(“SIP/1005-00000010”, “SIP/2000,TtrI”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/2000
– Connected line update to SIP/1005-00000010 prevented.
– SIP/2000-00000011 is ringing
> 0x7fd9dc649450 – Probation passed - setting RTP source address to 10.32.12.74:8000
– Connected line update to SIP/1005-00000010 prevented.
– SIP/2000-00000011 answered SIP/1005-00000010
– Channel SIP/2000-00000011 joined ‘simple_bridge’ basic-bridge
– Channel SIP/1005-00000010 joined ‘simple_bridge’ basic-bridge
> 0x7fd9dc649450 – Probation passed - setting RTP source address to 10.32.12.74:8000
> 0x7fd9d8013230 – Probation passed - setting RTP source address to 10.32.61.15:16390
== Manager ‘admin’ logged on from ::1
== Manager ‘admin’ logged off from ::1
– Started music on hold, class ‘default’, on channel ‘SIP/2000-00000011’
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [2001@from-internal:1] Set(“SIP/1005-00000012”, “__RINGTIMER=15”) in new stack
– Executing [2001@from-internal:2] Macro(“SIP/1005-00000012”, “exten-vm,novm,2001,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/1005-00000012”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/1005-00000012”, “TOUCH_MONITOR=1460014930.112”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/1005-00000012”, “AMPUSER=1005”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/1005-00000012”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/1005-00000012”, “1?Set(REALCALLERIDNUM=1005)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/1005-00000012”, “AMPUSER=1005”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/1005-00000012”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/1005-00000012”, “AMPUSERCIDNAME=1005”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/1005-00000012”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/1005-00000012”, “AMPUSERCID=1005”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/1005-00000012”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/1005-00000012”, “CALLERID(all)=“1005” <1005>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/1005-00000012”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/1005-00000012”, “0?Set(GROUP(concurrency_limit)=1005)”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/1005-00000012”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:15] Set(“SIP/1005-00000012”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:16] GotoIf(“SIP/1005-00000012”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“SIP/1005-00000012”, “CALLERID(number)=1005”) in new stack
– Executing [s@macro-user-callerid:28] Set(“SIP/1005-00000012”, “CALLERID(name)=1005”) in new stack
– Executing [s@macro-user-callerid:29] Set(“SIP/1005-00000012”, “CDR(cnum)=1005”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/1005-00000012”, “CDR(cnam)=1005”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/1005-00000012”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/1005-00000012”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/1005-00000012”, “__EXTTOCALL=2001”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/1005-00000012”, “__PICKUPMARK=2001”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/1005-00000012”, “RT=”) in new stack
– Executing [s@macro-exten-vm:6] Gosub(“SIP/1005-00000012”, “sub-record-check,s,1(exten,2001,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/1005-00000012”, “0?initialized”) in new stack
– Executing [s@sub-record-check:2] Set(“SIP/1005-00000012”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“SIP/1005-00000012”, “NOW=1460014930”) in new stack
– Executing [s@sub-record-check:4] Set(“SIP/1005-00000012”, “__DAY=07”) in new stack
– Executing [s@sub-record-check:5] Set(“SIP/1005-00000012”, “__MONTH=04”) in new stack
– Executing [s@sub-record-check:6] Set(“SIP/1005-00000012”, “__YEAR=2016”) in new stack
– Executing [s@sub-record-check:7] Set(“SIP/1005-00000012”, “__TIMESTR=20160407-131210”) in new stack
– Executing [s@sub-record-check:8] Set(“SIP/1005-00000012”, “__FROMEXTEN=1005”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/1005-00000012”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:10] NoOp(“SIP/1005-00000012”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“SIP/1005-00000012”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/1005-00000012”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“SIP/1005-00000012”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“SIP/1005-00000012”, “5?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“SIP/1005-00000012”, “1?sub-record-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] NoOp(“SIP/1005-00000012”, “Exten Recording Check between 1005 and 2001”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/1005-00000012”, “CALLTYPE=internal”) in new stack
– Executing [exten@sub-record-check:3] ExecIf(“SIP/1005-00000012”, “0?Set(CALLTYPE=)”) in new stack
– Executing [exten@sub-record-check:4] Set(“SIP/1005-00000012”, “CALLEE=dontcare”) in new stack
– Executing [exten@sub-record-check:5] ExecIf(“SIP/1005-00000012”, “0?Set(CALLEE=dontcare)”) in new stack
– Executing [exten@sub-record-check:6] GotoIf(“SIP/1005-00000012”, “0?callee”) in new stack
– Executing [exten@sub-record-check:7] GotoIf(“SIP/1005-00000012”, “1?caller”) in new stack
– Goto (sub-record-check,exten,13)
– Executing [exten@sub-record-check:13] Set(“SIP/1005-00000012”, “RECMODE=dontcare”) in new stack
– Executing [exten@sub-record-check:14] ExecIf(“SIP/1005-00000012”, “0?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:15] ExecIf(“SIP/1005-00000012”, “1?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:16] Gosub(“SIP/1005-00000012”, “recordcheck,1(dontcare,internal,2001)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“SIP/1005-00000012”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“SIP/1005-00000012”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [exten@sub-record-check:17] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [s@macro-exten-vm:7] GotoIf(“SIP/1005-00000012”, “1?macrodial”) in new stack
– Goto (macro-exten-vm,s,13)
– Executing [s@macro-exten-vm:13] GosubIf(“SIP/1005-00000012”, “0?clrheader,1()”) in new stack
– Executing [s@macro-exten-vm:14] Macro(“SIP/1005-00000012”, “dial-one,Ttr,2001”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/1005-00000012”, “DEXTEN=2001”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/1005-00000012”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/1005-00000012”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/1005-00000012”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/1005-00000012”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/1005-00000012”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/1005-00000012”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/1005-00000012”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/1005-00000012”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,23)
– Executing [s@macro-dial-one:23] GotoIf(“SIP/1005-00000012”, “1?next3:continue”) in new stack
– Goto (macro-dial-one,s,24)
– Executing [s@macro-dial-one:24] ExecIf(“SIP/1005-00000012”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
– Executing [s@macro-dial-one:25] GotoIf(“SIP/1005-00000012”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“SIP/1005-00000012”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/1005-00000012”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/1005-00000012”, “DEVICES=2001”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/1005-00000012”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/1005-00000012”, “0?Set(DEVICES=001)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/1005-00000012”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/1005-00000012”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/1005-00000012”, “THISDIAL=SIP/2001”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/1005-00000012”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/1005-00000012”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/1005-00000012”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/1005-00000012”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/1005-00000012”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/1005-00000012”, “THISPART2=SIP/2001”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/1005-00000012”, “0?Set(THISPART2=DAHDI/2001)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/1005-00000012”, “NEWDIAL=SIP/2001&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/1005-00000012”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/1005-00000012”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/1005-00000012”, “THISDIAL=SIP/2001”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [dstring@macro-dial-one:9] GotoIf(“SIP/1005-00000012”, “1?doset”) in new stack
– Goto (macro-dial-one,dstring,13)
– Executing [dstring@macro-dial-one:13] Set(“SIP/1005-00000012”, “DSTRING=SIP/2001&”) in new stack
– Executing [dstring@macro-dial-one:14] Set(“SIP/1005-00000012”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:15] GotoIf(“SIP/1005-00000012”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:16] ExecIf(“SIP/1005-00000012”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:17] Set(“SIP/1005-00000012”, “DSTRING=SIP/2001”) in new stack
– Executing [dstring@macro-dial-one:18] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“SIP/1005-00000012”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“SIP/1005-00000012”, “0?skiptrace”) in new stack
– Executing [s@macro-dial-one:29] GosubIf(“SIP/1005-00000012”, “1?ctset,1():ctclear,1()”) in new stack
– Executing [ctset@macro-dial-one:1] Set(“SIP/1005-00000012”, “DB(CALLTRACE/2001)=1005”) in new stack
– Executing [ctset@macro-dial-one:2] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [s@macro-dial-one:30] Set(“SIP/1005-00000012”, “D_OPTIONS=Ttr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“SIP/1005-00000012”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“SIP/1005-00000012”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“SIP/1005-00000012”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“SIP/1005-00000012”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:35] Set(“SIP/1005-00000012”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“SIP/1005-00000012”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“SIP/1005-00000012”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] GotoIf(“SIP/1005-00000012”, “0?godial”) in new stack
– Executing [s@macro-dial-one:39] Gosub(“SIP/1005-00000012”, “sub-presencestate-display,s,1(2001)”) in new stack
– Executing [s@sub-presencestate-display:1] Goto(“SIP/1005-00000012”, “state-not_set,1”) in new stack
– Goto (sub-presencestate-display,state-not_set,1)
– Executing [state-not_set@sub-presencestate-display:1] Set(“SIP/1005-00000012”, “PRESENCESTATE_DISPLAY=”) in new stack
– Executing [state-not_set@sub-presencestate-display:2] Return(“SIP/1005-00000012”, “”) in new stack
– Executing [s@macro-dial-one:40] Set(“SIP/1005-00000012”, “CONNECTEDLINE(name,i)=2001”) in new stack
– Executing [s@macro-dial-one:41] Set(“SIP/1005-00000012”, “CONNECTEDLINE(num)=2001”) in new stack
– Executing [s@macro-dial-one:42] Set(“SIP/1005-00000012”, “D_OPTIONS=TtrI”) in new stack
– Executing [s@macro-dial-one:43] Macro(“SIP/1005-00000012”, “dialout-one-predial-hook,”) in new stack
– Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/1005-00000012”, “”) in new stack
– Executing [s@macro-dial-one:44] Dial(“SIP/1005-00000012”, “SIP/2001,TtrI”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/2001
– Connected line update to SIP/1005-00000012 prevented.
– SIP/2001-00000013 is ringing
– Connected line update to SIP/1005-00000012 prevented.
– SIP/2001-00000013 answered SIP/1005-00000012
– Started music on hold, class ‘default’, on channel ‘SIP/1005-00000010’
– Channel SIP/2001-00000013 joined ‘simple_bridge’ basic-bridge <324c1e70-7d82-49fb-b662-96cc87633ad4>
– Channel SIP/1005-00000012 joined ‘simple_bridge’ basic-bridge <324c1e70-7d82-49fb-b662-96cc87633ad4>
> 0x7fd9dc650a70 – Probation passed - setting RTP source address to 10.32.12.74:8004
> 0x7fd9d800ad00 – Probation passed - setting RTP source address to 10.32.61.15:16384
– Channel SIP/1005-00000012 left ‘simple_bridge’ basic-bridge <324c1e70-7d82-49fb-b662-96cc87633ad4>
– Channel SIP/2001-00000013 left ‘simple_bridge’ basic-bridge <324c1e70-7d82-49fb-b662-96cc87633ad4>
== Spawn extension (macro-dial-one, s, 44) exited non-zero on ‘SIP/1005-00000012’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘SIP/1005-00000012’ in macro ‘exten-vm’
== Spawn extension (from-internal, 2001, 2) exited non-zero on ‘SIP/1005-00000012’
– Executing [h@from-internal:1] Hangup(“SIP/1005-00000012”, “”) in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1005-00000012’
– Stopped music on hold on SIP/2000-00000011
> 0x7fd9d8013230 – Probation passed - setting RTP source address to 10.32.61.15:16390
– Stopped music on hold on SIP/1005-00000010
– Channel SIP/1005-00000010 left ‘simple_bridge’ basic-bridge
– Channel SIP/2000-00000011 left ‘simple_bridge’ basic-bridge
== Spawn extension (macro-dial-one, s, 44) exited non-zero on ‘SIP/1005-00000010’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘SIP/1005-00000010’ in macro ‘exten-vm’
== Spawn extension (from-internal, 2000, 2) exited non-zero on ‘SIP/1005-00000010’
– Executing [h@from-internal:1] Hangup(“SIP/1005-00000010”, “”) in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1005-00000010’
[END] 07-04-2016 13:10:51
There’s nothing out of the ordinary in those logs, just looks like it was hung up. Are you initiating the conference from the phone? If so then it’s the phone who does it, and likely where the problem is.