Frequently My Asterisk shutdown automatically with this mentioned Beginning asterisk shutdown message.I have no idea why asterisk shutdown like this.
VERBOSE[30096] logger.c: Beginning asterisk shutdown....
ing 0
[Jul 16 12:07:13] VERBOSE[30096] logger.c: Executing last minute cleanups
[Jul 16 12:07:13] VERBOSE[30096] logger.c: == Destroying musiconhold processes
[Jul 16 12:07:13] VERBOSE[30096] logger.c: Asterisk cleanly ending (0).
[Jul 16 12:07:48] VERBOSE[19987] logger.c: Asterisk Event Logger Started /var/log/asterisk/event_log
[Jul 16 12:07:48] VERBOSE[19987] logger.c: Asterisk Dynamic Loader Starting:
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Parsing '/etc/asterisk/modules.conf': [Jul 16 12:07:48] VERBOSE[19987] logger.c: Found
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Parsing '/etc/asterisk/dnsmgr.conf': [Jul 16 12:07:48] VERBOSE[19987] logger.c: Found
[Jul 16 12:07:48] NOTICE[19987] dnsmgr.c: Managed DNS entries will be refreshed every 300 seconds.
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Ping
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Events
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Logoff
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Hangup
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Status
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Setvar
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Getvar
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action GetConfig
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action UpdateConfig
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Redirect
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Originate
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action Command
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action ExtensionState
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action AbsoluteTimeout
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action MailboxStatus
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action MailboxCount
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action ListCommands
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action UserEvent
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Manager registered action WaitEvent
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Parsing '/etc/asterisk/manager.conf': [Jul 16 12:07:48] VERBOSE[19987] logger.c: Found
[Jul 16 12:07:48] VERBOSE[19987] logger.c: Asterisk Management interface listening on port 5038
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Parsing '/etc/asterisk/cdr.conf': [Jul 16 12:07:48] VERBOSE[19987] logger.c: Found
[Jul 16 12:07:48] NOTICE[19987] cdr.c: CDR simple logging enabled.
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == Parsing '/etc/asterisk/rtp.conf': [Jul 16 12:07:48] VERBOSE[19987] logger.c: Found
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == RTP Allocating from port range 10000 -> 20000
[Jul 16 12:07:48] VERBOSE[19987] logger.c: == UDPTL allocating from port range 4500 -> 4999
[Jul 16 12:07:48] VERBOSE[19987] logger.c: Asterisk PBX Core Initializing
[Jul 16 12:07:48] VERBOSE[19987] logger.c: Registering builtin applications:
These are the kernel log. If any one know what is the issue and how to resolve this and let me know. In that sad thing is Mysql also corrupting so many time with frequent unexpected asterisk restart.
ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 74, io mem 0xb1d41000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 201, io mem 0xb1d40000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[D] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 74, io base 0x000040c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[D] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 74, io base 0x000040a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 74, io base 0x00004080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[D] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 201, io base 0x00004060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[D] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 201, io base 0x00004040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 201, io base 0x00004020
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 4-1: configuration #1 chosen from 1 choice
input: Logitech USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.1-1
SCSI subsystem initialized
input: Logitech USB Keyboard as /class/input/input1
input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.1-1
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 82
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x4158 ctl 0x416c bmdma 0x4130 irq 82
ata2: SATA max UDMA/133 cmd 0x4150 ctl 0x4168 bmdma 0x4138 irq 82
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input2
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input3
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 0)
Vendor: ATA Model: ST500DM002-1BD14 Rev: KC45
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt 0000:00:1f.5[D] -> GSI 21 (level, low) -> IRQ 90
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x4148 ctl 0x4164 bmdma 0x4110 irq 90
ata4: SATA max UDMA/133 cmd 0x4140 ctl 0x4160 bmdma 0x4118 irq 90
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 86736914
ext3_orphan_cleanup: deleting unreferenced inode 12255546
ext3_orphan_cleanup: deleting unreferenced inode 86736913
ext3_orphan_cleanup: deleting unreferenced inode 86736905
ext3_orphan_cleanup: deleting unreferenced inode 86736904
ext3_orphan_cleanup: deleting unreferenced inode 86736903
ext3_orphan_cleanup: deleting unreferenced inode 86736901
ext3_orphan_cleanup: deleting unreferenced inode 86736900
ext3_orphan_cleanup: deleting unreferenced inode 86736899
EXT3-fs: sda2: 9 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1405412231.723:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input4
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3.1
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:00:19.0 to 64
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:67:36:65:90
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 7, PHY: 8, PBA No: 0101ff-0ff
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 28 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth1: (PCI Express:2.5GB/s:Width x1) 00:1e:67:36:65:91
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 3, PHY: 8, PBA No: 1030ff-0ff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 82
8139cp 0000:08:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:08:00.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 201
eth2: RealTek RTL8139 at 0xf890a000, 00:e0:1c:3b:94:0e, IRQ 201
eth2: Identified 8139 chip type 'RTL-8139C'
sd 0:0:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1044216k swap on /dev/sda3. Priority:-1 extents:1 across:1044216k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 201
wcte12xp 0000:06:08.0: Setting up global serial parameters for E1
wcte12xp 0000:06:08.0: Found a Wildcard TE121
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
dahdi_echocan_mg2: Registered echo canceler 'MG2'
dahdi: Registered tone zone 0 (United States / North America)
wcte12xp 0000:06:08.0: Span configured for CCS/HDB3
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
wcte12xp 0000:06:08.0: Setting yellow alarm
eth0: no IPv6 routers present
wcte12xp 0000:06:08.0: Clearing yellow alarm
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
usb 4-1: USB disconnect, address 2
wcte12xp 0000:06:08.0: Missed interrupt. Increasing latency to 5 ms in order to compensate.
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
usbcore: deregistering driver xpp_usb
dahdi_transcode: Unloaded.
ACPI: PCI interrupt for device 0000:06:08.0 disabled
wcte12xp 0000:06:08.0: Freed a Wildcard TE12xP.
PCI: Enabling device 0000:06:08.0 (0210 -> 0213)
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 201
wcte12xp 0000:06:08.0: Setting up global serial parameters for E1
wcte12xp 0000:06:08.0: Found a Wildcard TE121
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
wcte12xp 0000:06:08.0: Span configured for CCS/HDB3
usbcore: deregistering driver xpp_usb
dahdi_transcode: Unloaded.
ACPI: PCI interrupt for device 0000:06:08.0 disabled
wcte12xp 0000:06:08.0: Freed a Wildcard TE12xP.
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
PCI: Enabling device 0000:06:08.0 (0210 -> 0213)
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 201
wcte12xp 0000:06:08.0: Setting up global serial parameters for E1
wcte12xp 0000:06:08.0: Found a Wildcard TE121
dahdi_transcode: Loaded.Please help me to resolve this.