Asterisk 1.8.8.2 and TE110P + OpenVox A400 problem

Hello everyone, I can not run the following card OpenVox A400 with the FXO port to the span 2, in span 1 I have isdn PRI card TE110P and it works perfectly. Virtually the card fxo me sees it as if it were the channel 32 of the span 1 perhaps some wrong way, this is my configuration.

/etc/dahdi/system.conf

Autogenerated by /usr/sbin/dahdi_genconf on Fri Mar 23 16:42:29 2012

If you edit this file and execute /usr/sbin/dahdi_genconf again,

your manual changes will be LOST.

Dahdi Configuration File

This file is parsed by the Dahdi Configurator, dahdi_cfg

Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” (MASTER) HDB3/CCS/CRC4

span=1,1,0,ccs,hdb3,crc4

termtype: te

bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

#Span 2: WCTDM/4 “Wildcard TDM400P REV E/F Board 5”

fxsks=32
echocanceller=mg2,32

channel 33, WCTDM/4/1, no module.

channel 34, WCTDM/4/2, no module.

channel 35, WCTDM/4/3, no module.

Global data

loadzone = it
defaultzone = it

/etc/asterisk/dahdi-channels.conf

; Autogenerated by /usr/sbin/dahdi_genconf on Fri Mar 23 16:42:29 2012
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” (MASTER) HDB3/CCS/CRC4
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63

; Span 2: WCTDM/4 “Wildcard TDM400P REV E/F Board 5”
;;; line="32 WCTDM/4/0 FXSKS (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 32
callerid=
group=2
context=default

/etc/asterisk/chan_dahdi.conf

[qsig]
group=1
context=qsig
switchtype=qsig
signalling=pri_cpe
dahdichan=1-15,17-31
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
immediate=no
hidecalleridname=no
facilityenable = yes
internationalprefix=00
nationalprefix=0

[urbana]
group=2
context=urbana
signalling=fxs_ks
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
busydetect=yes
busycount=3
immediate=no
#include dahdi-channels.conf