All Circuits are busy

Asterisk Asterisk Support
1

hi i have a te110p and a siemens pbx when the system start the zaptel load the module and all circuits are open and good but when i load asterisk all circuits are busy is that correct in a asterisk @home

[root@asterisk1 asterisk]# cat /proc/zaptel/1
Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” HDB3/CCS/CRC4

       1 WCT1/0/1 Clear (In use) 
       2 WCT1/0/2 Clear (In use) 
       3 WCT1/0/3 Clear (In use) 
       4 WCT1/0/4 Clear (In use) 
       5 WCT1/0/5 Clear (In use) 
       6 WCT1/0/6 Clear (In use) 
       7 WCT1/0/7 Clear (In use) 
       8 WCT1/0/8 Clear (In use) 
       9 WCT1/0/9 Clear (In use) 
      10 WCT1/0/10 Clear (In use) 
      11 WCT1/0/11 Clear (In use) 
      12 WCT1/0/12 Clear (In use) 
      13 WCT1/0/13 Clear (In use) 
      14 WCT1/0/14 Clear (In use) 
      15 WCT1/0/15 Clear (In use) 
      16 WCT1/0/16 HDLCFCS (In use) 
      17 WCT1/0/17 Clear (In use) 
      18 WCT1/0/18 Clear (In use) 
      19 WCT1/0/19 Clear (In use) 
      20 WCT1/0/20 Clear (In use) 
      21 WCT1/0/21 Clear (In use) 
      22 WCT1/0/22 Clear (In use) 
      23 WCT1/0/23 Clear (In use) 
      24 WCT1/0/24 Clear (In use) 
      25 WCT1/0/25 Clear (In use) 
      26 WCT1/0/26 Clear (In use) 
      27 WCT1/0/27 Clear (In use) 
      28 WCT1/0/28 Clear (In use) 
      29 WCT1/0/29 Clear (In use) 
      30 WCT1/0/30 Clear (In use) 
      31 WCT1/0/31 Clear (In use)