Hello,
When I try to do an outbound call I get the message “all circuits are busy” but no one use the line.
This is usually related to some problem with registration to a remote service provider or a setup problem with an analogue or digital line. What sort of connection are you using for the outgoing call? What do you get in the Asterisk log file?
Hello,
I have only Voip LInes, and my line is record fine with the provider. I have tested alone with xlite and don’t have any problems.
Please find below the cli whe I try to do an outbound call
thanks
– Executing [0040332450844@from-internal:1] Macro(“SIP/3003-09d84c58”, “use r-callerid|SKIPTTL|”) in new stack
– Executing [s@macro-user-callerid:1] NoOp(“SIP/3003-09d84c58”, “user-calle rid: device 3003”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/3003-09d84c58”, “AMPUSER=300 3”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/3003-09d84c58”, "0?report ") in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/3003-09d84c58”, “1|Set|RE ALCALLERIDNUM=3003”) in new stack
– Executing [s@macro-user-callerid:5] NoOp(“SIP/3003-09d84c58”, “REALCALLER IDNUM is 3003”) in new stack
– Executing [s@macro-user-callerid:6] Set(“SIP/3003-09d84c58”, “AMPUSER=300 3”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/3003-09d84c58”, “AMPUSERCIDN AME=admin”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/3003-09d84c58”, "0?report ") in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/3003-09d84c58”, “AMPUSERCID= 3003”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/3003-09d84c58”, “CALLERID(a ll)=“admin” <3003>”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/3003-09d84c58”, “REALCALLER IDNUM=3003”) in new stack
– Executing [s@macro-user-callerid:12] ExecIf(“SIP/3003-09d84c58”, “0|Set|C HANNEL(language)=”) in new stack
– Executing [s@macro-user-callerid:13] NoOp(“SIP/3003-09d84c58”, “TTL: ARG 1: SKIPTTL”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/3003-09d84c58”, “1?conti nue”) in new stack
– Goto (macro-user-callerid,s,23)
– Executing [s@macro-user-callerid:23] NoOp(“SIP/3003-09d84c58”, “Using Cal lerID “admin” <3003>”) in new stack
– Executing [0040332450844@from-internal:2] Set(“SIP/3003-09d84c58”, “NODE ST=") in new stack
– Executing [0040332450844@from-internal:3] Macro(“SIP/3003-09d84c58”, “rec ord-enable|3003|OUT|”) in new stack
– Executing [s@macro-record-enable:1] GotoIf(“SIP/3003-09d84c58”, “0?2:4”) in new stack
– Goto (macro-record-enable,s,4)
– Executing [s@macro-record-enable:4] AGI(“SIP/3003-09d84c58”, “recordingch eck|20090103-170941|1230995381.153”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090103-170941|1230995381.153: Outbound recording not enabled
– AGI Script recordingcheck completed, returning 0
– Executing [s@macro-record-enable:5] NoOp(“SIP/3003-09d84c58”, “No recordi ng needed”) in new stack
– Executing [0040332450844@from-internal:4] Macro(“SIP/3003-09d84c58”, “dia lout-trunk|4|0040332450844||”) in new stack
– Executing [s@macro-dialout-trunk:1] Set(“SIP/3003-09d84c58”, “DIAL_TRUNK= 4”) in new stack
– Executing [s@macro-dialout-trunk:2] ExecIf(“SIP/3003-09d84c58”, “0|Authen ticate|”) in new stack
– Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/3003-09d84c58”, “0?disabl etrunk|1”) in new stack
– Executing [s@macro-dialout-trunk:4] Set(“SIP/3003-09d84c58”, “DIAL_NUMBER =0040332450844”) in new stack
– Executing [s@macro-dialout-trunk:5] Set(“SIP/3003-09d84c58”, "DIAL_TRUNK OPTIONS=tr”) in new stack
– Executing [s@macro-dialout-trunk:6] Set(“SIP/3003-09d84c58”, “GROUP()=OUT _4”) in new stack
– Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/3003-09d84c58”, “1?nomax” ) in new stack
– Goto (macro-dialout-trunk,s,9)
– Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/3003-09d84c58”, “0?skipou tcid”) in new stack
– Executing [s@macro-dialout-trunk:10] Set(“SIP/3003-09d84c58”, “DIAL_TRUNK OPTIONS=") in new stack
– Executing [s@macro-dialout-trunk:11] Macro(“SIP/3003-09d84c58”, “outbound -callerid|4”) in new stack
– Executing [s@macro-outbound-callerid:1] GotoIf(“SIP/3003-09d84c58”, “1?st art”) in new stack
– Goto (macro-outbound-callerid,s,3)
– Executing [s@macro-outbound-callerid:3] NoOp(“SIP/3003-09d84c58”, “REALCA LLERIDNUM is 3003”) in new stack
– Executing [s@macro-outbound-callerid:4] GotoIf(“SIP/3003-09d84c58”, “1?no rmcid”) in new stack
– Goto (macro-outbound-callerid,s,9)
– Executing [s@macro-outbound-callerid:9] Set(“SIP/3003-09d84c58”, “USEROUT CID=3003”) in new stack
– Executing [s@macro-outbound-callerid:10] Set(“SIP/3003-09d84c58”, “EMERGE NCYCID=”) in new stack
– Executing [s@macro-outbound-callerid:11] Set(“SIP/3003-09d84c58”, “TRUNKO UTCID=“silviu”<21100017918>”) in new stack
– Executing [s@macro-outbound-callerid:12] GotoIf(“SIP/3003-09d84c58”, “1?t runkcid”) in new stack
– Goto (macro-outbound-callerid,s,16)
– Executing [s@macro-outbound-callerid:16] GotoIf(“SIP/3003-09d84c58”, “0?u sercid”) in new stack
– Executing [s@macro-outbound-callerid:17] Set(“SIP/3003-09d84c58”, “CALLER ID(all)=silviu<21100017918>”) in new stack
– Executing [s@macro-outbound-callerid:18] GotoIf(“SIP/3003-09d84c58”, “0?r eport”) in new stack
– Executing [s@macro-outbound-callerid:19] Set(“SIP/3003-09d84c58”, “CALLER ID(all)=3003”) in new stack
– Executing [s@macro-outbound-callerid:20] GotoIf(“SIP/3003-09d84c58”, “1?r eport:hidecid”) in new stack
– Goto (macro-outbound-callerid,s,22)
– Executing [s@macro-outbound-callerid:22] NoOp(“SIP/3003-09d84c58”, “Calle rID set to “” <3003>”) in new stack
– Executing [s@macro-dialout-trunk:12] AGI(“SIP/3003-09d84c58”, “fixlocalpr efix”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
– AGI Script fixlocalprefix completed, returning 0
– Executing [s@macro-dialout-trunk:13] Set(“SIP/3003-09d84c58”, “OUTNUM=004 0332450844”) in new stack
– Executing [s@macro-dialout-trunk:14] Set(“SIP/3003-09d84c58”, “custom=SIP /Terra”) in new stack
– Executing [s@macro-dialout-trunk:15] GotoIf(“SIP/3003-09d84c58”, “1?gocal l”) in new stack
– Goto (macro-dialout-trunk,s,17)
– Executing [s@macro-dialout-trunk:17] Macro(“SIP/3003-09d84c58”, “dialout- trunk-predial-hook|”) in new stack
– Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/3003-09d84c58”, “0?bypas s|1”) in new stack
– Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/3003-09d84c58”, “0?custo mtrunk”) in new stack
– Executing [s@macro-dialout-trunk:20] Dial(“SIP/3003-09d84c58”, “SIP/Terra /0040332450844|300|”) in new stack
– Called Terra/0040332450844
– SIP/Terra-09def5b0 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
– Executing [s@macro-dialout-trunk:21] Goto(“SIP/3003-09d84c58”, “s-CONGEST ION|1”) in new stack
– Goto (macro-dialout-trunk,s-CONGESTION,1)
– Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf(“SIP/3003-09d84c58” , “1?noreport”) in new stack
– Goto (macro-dialout-trunk,s-CONGESTION,3)
– Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp(“SIP/3003-09d84c58”, “TRUNK Dial failed due to CONGESTION - failing through to other trunks”) in new stack
– Executing [0040332450844@from-internal:5] Macro(“SIP/3003-09d84c58”, “dia lout-trunk|3|0040332450844||”) in new stack
– Executing [s@macro-dialout-trunk:1] Set(“SIP/3003-09d84c58”, “DIAL_TRUNK= 3”) in new stack
– Executing [s@macro-dialout-trunk:2] ExecIf(“SIP/3003-09d84c58”, “0|Authen ticate|”) in new stack
– Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/3003-09d84c58”, “0?disabl etrunk|1”) in new stack
– Executing [s@macro-dialout-trunk:4] Set(“SIP/3003-09d84c58”, “DIAL_NUMBER =0040332450844”) in new stack
– Executing [s@macro-dialout-trunk:5] Set(“SIP/3003-09d84c58”, "DIAL_TRUNK OPTIONS=tr”) in new stack
– Executing [s@macro-dialout-trunk:6] Set(“SIP/3003-09d84c58”, “GROUP()=OUT _3”) in new stack
– Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/3003-09d84c58”, “1?nomax” ) in new stack
– Goto (macro-dialout-trunk,s,9)
– Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/3003-09d84c58”, “0?skipou tcid”) in new stack
– Executing [s@macro-dialout-trunk:10] Set(“SIP/3003-09d84c58”, “DIAL_TRUNK _OPTIONS=”) in new stack
– Executing [s@macro-dialout-trunk:11] Macro(“SIP/3003-09d84c58”, “outbound -callerid|3”) in new stack
– Executing [s@macro-outbound-callerid:1] GotoIf(“SIP/3003-09d84c58”, “1?st art”) in new stack
– Goto (macro-outbound-callerid,s,3)
– Executing [s@macro-outbound-callerid:3] NoOp(“SIP/3003-09d84c58”, “REALCA LLERIDNUM is 3003”) in new stack
– Executing [s@macro-outbound-callerid:4] GotoIf(“SIP/3003-09d84c58”, “1?no rmcid”) in new stack
– Goto (macro-outbound-callerid,s,9)
– Executing [s@macro-outbound-callerid:9] Set(“SIP/3003-09d84c58”, “USEROUT CID=3003”) in new stack
– Executing [s@macro-outbound-callerid:10] Set(“SIP/3003-09d84c58”, “EMERGE NCYCID=”) in new stack
– Executing [s@macro-outbound-callerid:11] Set(“SIP/3003-09d84c58”, “TRUNKO UTCID=“spunealo”<40332560285>”) in new stack
– Executing [s@macro-outbound-callerid:12] GotoIf(“SIP/3003-09d84c58”, “1?t runkcid”) in new stack
– Goto (macro-outbound-callerid,s,16)
– Executing [s@macro-outbound-callerid:16] GotoIf(“SIP/3003-09d84c58”, “0?u sercid”) in new stack
– Executing [s@macro-outbound-callerid:17] Set(“SIP/3003-09d84c58”, “CALLER ID(all)=spunealo<40332560285>”) in new stack
– Executing [s@macro-outbound-callerid:18] GotoIf(“SIP/3003-09d84c58”, “0?r eport”) in new stack
– Executing [s@macro-outbound-callerid:19] Set(“SIP/3003-09d84c58”, “CALLER ID(all)=3003”) in new stack
– Executing [s@macro-outbound-callerid:20] GotoIf(“SIP/3003-09d84c58”, “1?r eport:hidecid”) in new stack
– Goto (macro-outbound-callerid,s,22)
– Executing [s@macro-outbound-callerid:22] NoOp(“SIP/3003-09d84c58”, “Calle rID set to “” <3003>”) in new stack
– Executing [s@macro-dialout-trunk:12] AGI(“SIP/3003-09d84c58”, “fixlocalpr efix”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
== fixlocalprefix: Dialpattern xxxxxxxxxxxxx matched. 0040332450844 -> 004033 2450844
– AGI Script fixlocalprefix completed, returning 0
– Executing [s@macro-dialout-trunk:13] Set(“SIP/3003-09d84c58”, “OUTNUM=004 0332450844”) in new stack
– Executing [s@macro-dialout-trunk:14] Set(“SIP/3003-09d84c58”, “custom=SIP /SPUNEALO”) in new stack
– Executing [s@macro-dialout-trunk:15] GotoIf(“SIP/3003-09d84c58”, “1?gocal l”) in new stack
– Goto (macro-dialout-trunk,s,17)
– Executing [s@macro-dialout-trunk:17] Macro(“SIP/3003-09d84c58”, “dialout- trunk-predial-hook|”) in new stack
– Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/3003-09d84c58”, “0?bypas s|1”) in new stack
– Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/3003-09d84c58”, “0?custo mtrunk”) in new stack
– Executing [s@macro-dialout-trunk:20] Dial(“SIP/3003-09d84c58”, “SIP/SPUNE ALO/0040332450844|300|”) in new stack
== Everyone is busy/congested at this time (1:0/0/1)
– Executing [s@macro-dialout-trunk:21] Goto(“SIP/3003-09d84c58”, “s-CHANUNA VAIL|1”) in new stack
– Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
– Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/3003-09d84c58 ", “1?noreport”) in new stack
– Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
– Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp(“SIP/3003-09d84c58”, “TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks”) in ne w stack
– Executing [0040332450844@from-internal:6] Macro(“SIP/3003-09d84c58”, “out isbusy|”) in new stack
– Executing [s@macro-outisbusy:1] Playback(“SIP/3003-09d84c58”, “all-circui ts-busy-now|noanswer”) in new stack
– <SIP/3003-09d84c58> Playing ‘all-circuits-busy-now’ (language ‘en’)
– Executing [s@macro-outisbusy:2] Playback(“SIP/3003-09d84c58”, “pls-try-call-later|noanswer”) in new stack
– <SIP/3003-09d84c58> Playing ‘pls-try-call-later’ (language ‘en’)
– Executing [s@macro-outisbusy:3] Macro(“SIP/3003-09d84c58”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] ResetCDR(“SIP/3003-09d84c58”, “w”) in new stack
– Executing [s@macro-hangupcall:2] NoCDR(“SIP/3003-09d84c58”, “”) in new stack
– Executing [s@macro-hangupcall:3] GotoIf(“SIP/3003-09d84c58”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [s@macro-hangupcall:6] GotoIf(“SIP/3003-09d84c58”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] GotoIf(“SIP/3003-09d84c58”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,11)
– Executing [s@macro-hangupcall:11] Hangup(“SIP/3003-09d84c58”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/3003-09d84c58’ in macro ‘hangupcall’
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/3003-09d84c58’ in macro ‘outisbusy’
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/3003-09d84c58’unikbit
Posts: 5
Joined: Sat Jan 03, 2009 4:06 am
also please fin below my set sip debug results
Here my set sip debug
I don’t exactly what I have to paste here so I pasted all results from:
asterisk -r
set sip debug
and than a called a number and ai pasted here the results
udio 11292 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
<------------>
– <SIP/3003-09def5b0> Playing ‘all-circuits-busy-now’ (language ‘en’)
– Executing [s@macro-outisbusy:2] Playback(“SIP/3003-09def5b0”, “pls-try-call-later|noanswer”) in new stack
– <SIP/3003-09def5b0> Playing ‘pls-try-call-later’ (language ‘en’)
Really destroying SIP dialog ‘YjBiNzgxMTcwNTA4OTg5MzMwNmM5MGFlY2U3MWYxMWI.’ Method: REGISTER
– Executing [s@macro-outisbusy:3] Macro(“SIP/3003-09def5b0”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] ResetCDR(“SIP/3003-09def5b0”, “w”) in new stack
– Executing [s@macro-hangupcall:2] NoCDR(“SIP/3003-09def5b0”, “”) in new stack
– Executing [s@macro-hangupcall:3] GotoIf(“SIP/3003-09def5b0”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [s@macro-hangupcall:6] GotoIf(“SIP/3003-09def5b0”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] GotoIf(“SIP/3003-09def5b0”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,11)
– Executing [s@macro-hangupcall:11] Hangup(“SIP/3003-09def5b0”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/3003-09def5b0’ in macro ‘hangupcall’
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/3003-09def5b0’ in macro ‘outisbusy’
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/3003-09def5b0’
Scheduling destruction of SIP dialog ‘YWMzMmI1OWVjZDIwNDc0MTVmMTljYTkzNzFjYjM1ZTU.’ in 32000 ms (Method: INVITE)
<— Reliably Transmitting (NAT) to 79.112.120.46:20336 —>
SIP/2.0 480 Temporarily unavailable
Via: SIP/2.0/UDP 192.168.0.3:20336;branch=z9hG4bK-d8754z-6877a5051647163e-1—d8754z-;received=79.112.120.46;rport=20336
From: "3003"sip:3003@rtc.dynalias.org;tag=5802a07f
To: "0040332450844"sip:0040332450844@rtc.dynalias.org;tag=as2333c903
Call-ID: YWMzMmI1OWVjZDIwNDc0MTVmMTljYTkzNzFjYjM1ZTU.
CSeq: 2 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Content-Length: 0
<------------>
elastix*CLI>
<— SIP read from 79.112.120.46:20336 —>
ACK sip:0040332450844@rtc.dynalias.org SIP/2.0
Via: SIP/2.0/UDP 192.168.0.3:20336;branch=z9hG4bK-d8754z-6877a5051647163e-1—d8754z-;rport
To: "0040332450844"sip:0040332450844@rtc.dynalias.org;tag=as2333c903
From: "3003"sip:3003@rtc.dynalias.org;tag=5802a07f
Call-ID: YWMzMmI1OWVjZDIwNDc0MTVmMTljYTkzNzFjYjM1ZTU.
CSeq: 2 ACK
Content-Length: 0
<------------->
— (7 headers 0 lines) —
REGISTER 13 headers, 0 lines
Reliably Transmitting (NAT) to 193.47.84.4:5060:
REGISTER sip:terrasip.net SIP/2.0
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK4c37ae6e;rport
From: sip:21100017918@terrasip.net;tag=as4295050a
To: sip:21100017918@terrasip.net
Call-ID: 50082032574a4fac7b76301946cb0c99@127.0.0.1
CSeq: 2050 REGISTER
User-Agent: Asterisk PBX
Max-Forwards: 70
Authorization: Digest username=“21100017918”, realm=“terrasip.net”, algorithm=MD5, uri=“sip:terrasip.net”, nonce=“4960a808d1ac28fba7853941e73bf5bb1ffff1ea”, response="acfe9cd103c750e386c5db5897d44cce"
Expires: 120
Contact: sip:21100017918@86.124.52.36
Event: registration
Content-Length: 0
REGISTER 13 headers, 0 lines
Reliably Transmitting (NAT) to 193.47.84.4:5060:
REGISTER sip:terrasip.net SIP/2.0
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK2be66aef;rport
From: sip:21100017918@terrasip.net;tag=as0ef53099
To: sip:21100017918@terrasip.net
Call-ID: 4160fd512cff59586bd5cc4b3ada8a41@127.0.0.1
CSeq: 2050 REGISTER
User-Agent: Asterisk PBX
Max-Forwards: 70
Authorization: Digest username=“21100017918”, realm=“terrasip.net”, algorithm=MD5, uri=“sip:terrasip.net”, nonce=“4960a808d1ac28fba7853941e73bf5bb1ffff1ea”, response="acfe9cd103c750e386c5db5897d44cce"
Expires: 120
Contact: sip:s@86.124.52.36
Event: registration
Content-Length: 0
elastix*CLI>
<— SIP read from 193.47.84.4:5060 —>
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK4c37ae6e;rport=5060
From: sip:21100017918@terrasip.net;tag=as4295050a
To: sip:21100017918@terrasip.net;tag=38839b478480d9692e802c60ed653d2c.9798
Call-ID: 50082032574a4fac7b76301946cb0c99@127.0.0.1
CSeq: 2050 REGISTER
WWW-Authenticate: Digest realm=“terrasip.net”, nonce=“4960a943dbfd60d2bf0dc537bbab76eaabbaf56e”, stale=true
Server: OpenSER (1.3.1-notls (x86_64/linux))
Content-Length: 0
<------------->
— (9 headers 0 lines) —
Responding to challenge, registration to domain/host name terrasip.net
REGISTER 13 headers, 0 lines
Reliably Transmitting (NAT) to 193.47.84.4:5060:
REGISTER sip:terrasip.net SIP/2.0
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK45076747;rport
From: sip:21100017918@terrasip.net;tag=as40469dfe
To: sip:21100017918@terrasip.net
Call-ID: 50082032574a4fac7b76301946cb0c99@127.0.0.1
CSeq: 2051 REGISTER
User-Agent: Asterisk PBX
Max-Forwards: 70
Authorization: Digest username=“21100017918”, realm=“terrasip.net”, algorithm=MD5, uri=“sip:terrasip.net”, nonce=“4960a943dbfd60d2bf0dc537bbab76eaabbaf56e”, response="fed709b44632792a6adc4ed240b6bd2c"
Expires: 120
Contact: sip:21100017918@86.124.52.36
Event: registration
Content-Length: 0
elastix*CLI>
<— SIP read from 193.47.84.4:5060 —>
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK2be66aef;rport=5060
From: sip:21100017918@terrasip.net;tag=as0ef53099
To: sip:21100017918@terrasip.net;tag=38839b478480d9692e802c60ed653d2c.0927
Call-ID: 4160fd512cff59586bd5cc4b3ada8a41@127.0.0.1
CSeq: 2050 REGISTER
WWW-Authenticate: Digest realm=“terrasip.net”, nonce=“4960a943dbfd60d2bf0dc537bbab76eaabbaf56e”, stale=true
Server: OpenSER (1.3.1-notls (x86_64/linux))
Content-Length: 0
<------------->
— (9 headers 0 lines) —
Responding to challenge, registration to domain/host name terrasip.net
REGISTER 13 headers, 0 lines
Reliably Transmitting (NAT) to 193.47.84.4:5060:
REGISTER sip:terrasip.net SIP/2.0
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK5214b31a;rport
From: sip:21100017918@terrasip.net;tag=as3d0a2944
To: sip:21100017918@terrasip.net
Call-ID: 4160fd512cff59586bd5cc4b3ada8a41@127.0.0.1
CSeq: 2051 REGISTER
User-Agent: Asterisk PBX
Max-Forwards: 70
Authorization: Digest username=“21100017918”, realm=“terrasip.net”, algorithm=MD5, uri=“sip:terrasip.net”, nonce=“4960a943dbfd60d2bf0dc537bbab76eaabbaf56e”, response="fed709b44632792a6adc4ed240b6bd2c"
Expires: 120
Contact: sip:s@86.124.52.36
Event: registration
Content-Length: 0
elastix*CLI>
<— SIP read from 193.47.84.4:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK45076747;rport=5060
From: sip:21100017918@terrasip.net;tag=as40469dfe
To: sip:21100017918@terrasip.net;tag=38839b478480d9692e802c60ed653d2c.d495
Call-ID: 50082032574a4fac7b76301946cb0c99@127.0.0.1
CSeq: 2051 REGISTER
Contact: sip:s@86.124.52.36;expires=15, sip:21100017918@86.124.52.36;expires=120
Server: OpenSER (1.3.1-notls (x86_64/linux))
Content-Length: 0
<------------->
— (9 headers 0 lines) —
Scheduling destruction of SIP dialog ‘50082032574a4fac7b76301946cb0c99@127.0.0.1’ in 32000 ms (Method: REGISTER)
elastix*CLI>
<— SIP read from 193.47.84.4:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 86.124.52.36:5060;branch=z9hG4bK5214b31a;rport=5060
From: sip:21100017918@terrasip.net;tag=as3d0a2944
To: sip:21100017918@terrasip.net;tag=38839b478480d9692e802c60ed653d2c.d9b8
Call-ID: 4160fd512cff59586bd5cc4b3ada8a41@127.0.0.1
CSeq: 2051 REGISTER
Contact: sip:s@86.124.52.36;expires=120, sip:21100017918@86.124.52.36;expires=120
Server: OpenSER (1.3.1-notls (x86_64/linux))
Content-Length: 0
<------------->
— (9 headers 0 lines) —
Scheduling destruction of SIP dialog ‘4160fd512cff59586bd5cc4b3ada8a41@127.0.0.1’ in 32000 ms (Method: REGISTER)
Really destroying SIP dialog ‘NzNhYmRiMTRlY2EwNzM5ZmRjMDc2Y2MxOWZmOGFiODg.’ Method: ACK
also sip show peers
Name/username Host Dyn Nat ACL Port Status
TERRASIP/21100017918 193.47.84.4 N 5060 Unmonitored
Terra/21100017918 193.47.84.4 N 5060 Unmonitored
3003/3003 79.112.120.46 D N 20336 OK (105 ms)
3002/3002 (Unspecified) D N 0 UNKNOWN
3001/3001 (Unspecified) D N 0 UNKNOWN
3000/3000 (Unspecified) D N 0 UNKNOWN
thanks
Try adding qualify=yes to the SIP trunks to see if they are responding within a reasonable time. I note that you have NAT set to yes for all extensions and the SIP trunks. Is this correct? Also if you need NAT for the SIP trunks are the externip= and localnet= in your sip.conf correct and do you have nat=1 in sip.conf as well?
hello,
I have added in sip conf under [general] qualify=yes
TERRASIP/21100017918 193.47.84.4 N 5060 OK (36 ms)
Terra/21100017918 193.47.84.4 N 5060 OK (36 ms)
8000 (Unspecified) D N 0 UNKNOWN
3004 (Unspecified) D N 0 UNKNOWN
3003 (Unspecified) D N 0 UNKNOWN
3002 (Unspecified) D N 0 UNKNOWN
3001/3001 79.112.120.131 D N 16930 OK (6 ms)
3000 (Unspecified) D N 0 UNKNOWN
Also I have added nat =1 but get also same message.
thanks