Hi Forum,
I’ve got a customer with 8 FXO ports on a 24 port Digium card and I just got a call that all the PSTN stuff was locked up. For future, what is needed? Below are the zap confs - There was no debugging info because it wasn’t expected. This locked up over the course of a week. Last week I noticed channel 2 hadn’t released and it culminated in the 6 zap channels for the admin office being locked up this afternoon. All the calls would have been inbound because they use their SIP provider for outbound dialling.
Any insights would be appreciated and further debugging stuff can be fetched for future reference.
Cheers
Mylo
Version Numbers:
2.6.16.21-0.21-smp on an x86_64 (opensuse)
zaptel-1.2.10
asterisk-1.2.13
asterisk-addons-1.2.5
/etc/init.d/zaptel starts up zapata card with
modprobe wctdm24xxp opermode=AUSTRALIA
/etc/zaptel.conf
loadzone = au
defaultzone=au
fxsks=1-8
/etc/asterisk/zapata.conf
[channels]
language=en
toneduration=100
context=trunkincomingAdmin
signalling=fxs_ks
;usedistinctiveringdetection=yes
usecallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
callreturn=no
rxgain=7.3
txgain=4.3
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
;echotraining=800
;relaxdtmf=yes
group=1
callgroup=1
pickupgroup=1
immediate=no
flash=100
busydetect=yes
busycount=4
busypattern=400,400
;answeronpolarityswitch=yes
;hanguponpolarityswitch=yes
callprogress=no
progzone=au
;
ringtimeout=6000
;pulsedial=yes
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
musiconhold=default
;jitterbuffers=4
channel=>1 ;X100P
channel=>2 ;X100P
channel=>3 ;X100P
channel=>4 ;X100P
channel=>5 ;X100P
channel=>6 ;X100P
context=trunkincomingWarehouse
group=2
callgroup=2
pickupgroup=2
channel=>7 ;X100P
channel=>8 ;X100P