# Zaptel installation issue

**URL:** <https://community.asterisk.org/t/zaptel-installation-issue/16387>\
**Category:** Asterisk Support\
**Created:** [August 25, 2007, 12:23pm UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387 "2007-08-25T12:23:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ali\_raja](https://avatars.discourse-cdn.com/v4/letter/a/3e96dc/32.png) [@ali\_raja](https://community.asterisk.org/u/ali_raja)\
**Post date:** [August 25, 2007, 12:23pm UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387/1 "2007-08-25T12:23:28Z")

</div>

hi

i m getting the following error on FC6 can anyone help me to fix it out

> [@](#):
>
> [root@new-host-4 zaptel-1.2.20.1]# make linux26  
> grep: /lib/modules/2.6.18-1.2798.fc6xen/build/include/linux/autoconf.h: No such file or directory  
> make: \*\*\* No rule to make target `linux26’. Stop.

Regards  
dosti

---

<div class="post-metadata">

**Author:** ![rjenkins](https://avatars.discourse-cdn.com/v4/letter/r/eada6e/32.png) [@rjenkins](https://community.asterisk.org/u/rjenkins)\
**Post date:** [August 25, 2007, 12:41pm UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387/2 "2007-08-25T12:41:14Z")

</div>

Hi,

just use  
./configure  
make  
make install

I’ve only ever built in on Centos with kernel 2.6.x & I’ve never used ‘linux26’

---

<div class="post-metadata">

**Author:** ![ali\_raja](https://avatars.discourse-cdn.com/v4/letter/a/3e96dc/32.png) [@ali\_raja](https://community.asterisk.org/u/ali_raja)\
**Post date:** [August 25, 2007, 8:01pm UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387/3 "2007-08-25T20:01:45Z")

</div>

hello  
here is the cli response…

[quote]root@new-host-4 zaptel-1.2.20.1]# ./configure  
bash: ./configure: No such file or directory  
[/quote]

Any help

---

<div class="post-metadata">

**Author:** ![kayodea](https://avatars.discourse-cdn.com/v4/letter/k/4bbf92/32.png) [@kayodea](https://community.asterisk.org/u/kayodea)\
**Post date:** [August 25, 2007, 8:47pm UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387/4 "2007-08-25T20:47:02Z")

</div>

Hi,

you are trying to compile zaptel of the 1.2 branch so you don’t need to do a ./configure to get it compiled. The error you are getting is a result of some missing file on the kernel version you are running.

To fix this, do the following;

1. as root type: yum install kernel

2. after the bove have finished, type : yum install kernel-devel

I assume you have internet connection to perform the kernel upgrade commands above.

After upgrading the kernel as above, reboot the PC and recompile zaptel as follow;

1. make clean
2. make linux26
3. make install

I hope this helps.

Cheers.

---

<div class="post-metadata">

**Author:** ![ali\_raja](https://avatars.discourse-cdn.com/v4/letter/a/3e96dc/32.png) [@ali\_raja](https://community.asterisk.org/u/ali_raja)\
**Post date:** [August 26, 2007, 9:35am UTC](https://community.asterisk.org/t/zaptel-installation-issue/16387/5 "2007-08-26T09:35:07Z")

</div>

hello

Kayodea i have followed the instructions and finally have a better luck…thanks all of you