Weird translation table: different on every restart

jlpedrosa · July 1, 2008, 10:27pm

Hello all:
iÂ´m founding some weird things in Aterisk 1.6 Beta 9:
The translation’s cost between codecs is different every time i restart Asterisk… and it’s showing very high values!
is it normal? if not what’s the problem?
[size=59]

[code]root@panoramisk:/# /etc/init.d/asterisk start

Starting Asterisk PBX: asterisk [ OK ]
root@panoramisk:/# asterisk -rvvvvvv
Asterisk 1.6.0-beta9, Copyright © 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer markster@digium.com
Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘core show warranty’ for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type ‘core show license’ for details.
=========================================================================
== Parsing ‘/etc/asterisk/asterisk.conf’: == Found
Set to realtime thread
Running as group ‘asterisk’
== Parsing ‘/etc/asterisk/extconfig.conf’: == Found
Connected to Asterisk 1.6.0-beta9 currently running on panoramisk (pid = 20679)
Verbosity is at least 50
– Remote UNIX connection
panoramisk*CLI> core show translation
Translation times between formats (in microseconds) for one second of data
Source Format (Rows) Destination Format (Columns)
```
    g723   gsm  ulaw  alaw g726aal2 adpcm  slin lpc10  g729 speex  ilbc  g726  g722 slin16
```
g723 - - - - - - - - - - - - - -
gsm - - 2 2 3 2 1 2 - 20001 20001 2 2 2
ulaw - 2 - 1 3 2 1 2 - 20001 20001 2 2 2
alaw - 2 1 - 3 2 1 2 - 20001 20001 2 2 2
g726aal2 - 2 2 2 - 2 1 2 - 20001 20001 1 2 2
adpcm - 2 2 2 3 - 1 2 - 20001 20001 2 2 2
slin - 1 1 1 2 1 - 1 - 20000 20000 1 1 1
lpc10 - 2 2 2 3 2 1 - - 20001 20001 2 2 2
g729 - - - - - - - - - - - - - -
speex - 2 2 2 3 2 1 2 - - 20001 2 2 2
ilbc - 2 2 2 3 2 1 2 - 20001 - 2 2 2
g726 - 2 2 2 1 2 1 2 - 20001 20001 - 2 2
g722 - 2 2 2 3 2 1 2 - 20001 20001 2 - 1
slin16 - 3 3 3 4 3 2 3 - 20002 20002 3 1 -
panoramisk*CLI>
root@panoramisk:/# /etc/init.d/asterisk stop
Stopping Asterisk PBX: asterisk [ OK ]
root@panoramisk:/# /etc/init.d/asterisk start
Starting Asterisk PBX: asterisk [ OK ]
root@panoramisk:/# asterisk -rvvvvvv
Asterisk 1.6.0-beta9, Copyright © 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer markster@digium.com
Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘core show warranty’ for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type ‘core show license’ for details.
=========================================================================
== Parsing ‘/etc/asterisk/asterisk.conf’: == Found
Set to realtime thread
Running as group ‘asterisk’
== Parsing ‘/etc/asterisk/extconfig.conf’: == Found
Connected to Asterisk 1.6.0-beta9 currently running on panoramisk (pid = 20738)
Verbosity is at least 50
– Remote UNIX connection
panoramisk*CLI> core show translation
Translation times between formats (in microseconds) for one second of data
Source Format (Rows) Destination Format (Columns)
```
    g723   gsm  ulaw  alaw g726aal2 adpcm  slin lpc10  g729 speex  ilbc  g726  g722 slin16
```
g723 - - - - - - - - - - - - - -
gsm - - 2 2 2 2 1 2 - 20001 10001 2 2 2
ulaw - 2 - 1 2 2 1 2 - 20001 10001 2 2 2
alaw - 3 1 - 3 3 2 3 - 20002 10002 3 3 3
g726aal2 - 2 2 2 - 2 1 2 - 20001 10001 1 2 2
adpcm - 2 2 2 2 - 1 2 - 20001 10001 2 2 2
slin - 1 1 1 1 1 - 1 - 20000 10000 1 1 1
lpc10 - 10001 10001 10001 10001 10001 10000 - - 30000 20000 10001 10001 10001
g729 - - - - - - - - - - - - - -
speex - 2 2 2 2 2 1 2 - - 10001 2 2 2
ilbc - 10001 10001 10001 10001 10001 10000 10001 - 30000 - 10001 10001 10001
g726 - 2 2 2 1 2 1 2 - 20001 10001 - 2 2
g722 - 2 2 2 2 2 1 2 - 20001 10001 2 - 2
slin16 - 3 3 3 3 3 2 3 - 20002 10002 3 1 -
[/code][/size]

Thanks