# Weird PJSIP Issues and possible memory lieak? **URL:** \ **Category:** Asterisk SIP\ **Created:** [September 6, 2017, 3:37pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906 "2017-09-06T15:37:24Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 3:37pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/1 "2017-09-06T15:37:24Z")
Potentiallly related to closed [https://issues.asterisk.org/jira/browse/ASTERISK-25653](https://issues.asterisk.org/jira/browse/ASTERISK-25653) While I do have sip clients on cellular right now this is all occuring in-house over wifi or wired. My Asterisk 14/Freepbx14 is located on vultr and now is 2048GB ram up from 1024 ram last night Is anyone having weird issues with PJSIP? Since I migrated from ASterisk 13/Freepbx 12 I’ve had nothing but extensions dropping off. I was running on a 1024 RAM on Vultr and upped it to 2048 ram last night and TOP is showing me free memory keeps dropping: top - 10:21:35 up 12:16, 1 user, load average: 0.02, 0.13, 0.15 Tasks: 107 total, 1 running, 106 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.3 us, 0.3 sy, 0.0 ni, 99.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem : 1883708 total, 212440 free, 778244 used, 893024 buff/cache KiB Swap: 2097148 total, 2094288 free, 2860 used. 790064 avail Mem This started off as about 650000 free last night. looking at a asterisk debug I see pjsip running out of memory. Before I go over to Asterisk on this has anyone been seeing anything weird? Thanks leon some of the asterisk debug [2017-09-06 09:45:48] ERROR[7284] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[3640] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[3640] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[3640] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[3640] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[7285] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[7285] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[7285] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[7285] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[7285] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 09:45:48] ERROR[2803] pjproject: ssl0x7f0b5c0ccd40 Renegotiation failed: Not enough memory (PJ\_ENOMEM) [2017-09-06 09:45:48] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:45384;transport=TLS is now Unreachable. RTT: 0.000 msec [2017-09-06 09:54:06] VERBOSE[8236] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:38964;transport=TLS has been deleted [2017-09-06 09:56:06] VERBOSE[8236] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:45367;transport=TLS has been deleted [2017-09-06 09:59:30] VERBOSE[7602] pbx\_variables.c: Setting global variable ‘SIPDOMAIN’ to ‘[pbx.backwoodswireless.net](http://pbx.backwoodswireless.net)’ more interesting debugs: [2017-09-06 06:23:45] ERROR[32309] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:23:45] ERROR[32309] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:23:45] ERROR[7602] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:23:45] ERROR[2803] pjproject: ssl0x7f0b641d3e60 Renegotiation failed: Not enough memory (PJ\_ENOMEM) [2017-09-06 06:23:45] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:38938;transport=TLS is now Unreachable. RTT: 0.000 msec [2017-09-06 06:25:44] VERBOSE[7163] res\_pjsip\_registrar.c: Added contact ‘sips:702@70.44.10.180:45328;transport=TLS’ to AOR ‘702’ with expiration of 3600 seconds [2017-09-06 06:25:44] VERBOSE[8236] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:45328;transport=TLS has been created [2017-09-06 06:25:44] ERROR[31134] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:25:44] ERROR[31134] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:25:44] ERROR[31134] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 … [2017-09-06 06:25:44] ERROR[8841] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:25:44] ERROR[7163] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 06:25:44] ERROR[2803] pjproject: ssl0x7f0b4c626b10 Renegotiation failed: Not enough memory (PJ\_ENOMEM) [2017-09-06 06:25:44] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:45328;transport=TLS is now Unreachable. RTT: 0.000 msec [2017-09-06 06:33:36] ERROR[2803] pjproject: sip\_endpoint.c Error processing packet from 70.44.10.180:5060: Missing required header(s) (PJSIP\_EMISSINGHDR) Via [code 171050]: SIP/2.0 400 Bad Request From: sip:701@209.222.10.59;tag=bcd2606e-5c15-492c-b6d3-0c934bb00eb4 To: sip:701@70.44.10.180;tag=9ffa1a1b62bb6a06 Call-ID: 62929999-00d7-44ed-bb3f-a43ec24ff7a9 CSeq: 6193 NOTIFY User-Agent: Grandstream GXP2020 1.2.5.3 Warning: 398 "You are not allowed to CANCEL an established dialog" Content-Length: 0 – end of packet. [2017-09-06 06:34:03] VERBOSE[8236] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:38926;transport=TLS has been deleted [2017-09-06 06:34:04] ERROR[2803] pjproject: sip\_endpoint.c Error processing packet from 70.44.10.180:5066: Missing required header(s) (PJSIP\_EMISSINGHDR) Via [code 171050]: SIP/2.0 400 Bad Request From: sip:702@209.222.10.59;tag=2c13f4fb-d808-43ef-ba65-b6455e6f978e To: sip:702@70.44.10.180;tag=86962d2d9f6b5e8b Call-ID: b6f21b3c-85c5-44bc-a7b7-6b8400528244 CSeq: 4265 NOTIFY User-Agent: Grandstream GXP2020 1.2.5.3 Warning: 398 "You are not allowed to CANCEL an established dialog" Content-Length: 0 – end of packet. [2017-09-06 06:35:52] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:45312;transport=TLS has been deleted [2017-09-06 06:36:02] VERBOSE[2767] asterisk.c: Remote UNIX connection [2017-09-06 06:36:02] VERBOSE[2871] asterisk.c: Remote UNIX connection disconnected [2017-09-06 06:36:02] VERBOSE[2767] asterisk.c: Remote UNIX connection [2017-09-06 06:36:02] VERBOSE[2873] asterisk.c: Remote UNIX connection disconnected [2017-09-06 06:36:02] VERBOSE[2767] asterisk.c: Remote UNIX connection [2017-09-06 06:36:02] VERBOSE[2875] asterisk.c: Remote UNIX connection disconnected [2017-09-06 06:38:40] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:5060;transport=TCP is now Unreachable. RTT: 0.000 msec [2017-09-06 06:41:34] ERROR[2803] pjproject: sip\_transport.c Error processing 161 bytes packet from TCP 70.44.10.180:5066 : PJSIP syntax error exception when parsing ‘’ header on line 2 col 7: SIP/2.0 400 Bad Request CSeq: User-Agent: Grandstream GXP2020 1.2.5.3 Warning: 398 "You are not allowed to CANCEL an established dialog" Content-Length: 0 – end of packet. [2017-09-06 06:41:34] ERROR[2803] pjproject: sip\_endpoint.c Error processing packet from 70.44.10.180:5066: Missing required header(s) (PJSIP\_EMISSINGHDR) Via [code 171050]: SIP/2.0 400 Bad Request From: sip:702@209.222.10.59;tag=c69e843a-2268-4b15-8253-752439dec7ec To: sip:702@70.44.10.180;tag=750369d3-f4fa-406f-a596-7b68de87290e Call-ID: cce7be3d-4c88-498f-82dd-bb3b58bac473 CSeq: 15435 NOTIFY User-Agent: Grandstream GXP2020 1.2.5.3 Warning: 398 "You are not allowed to CANCEL an established dialog" Content-Length: 0 – end of packet. [2017-09-06 06:41:36] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sip:702@70.44.10.180:5066;transport=TCP has been deleted [2017-09-06 07:13:45] VERBOSE[8841] res\_pjsip\_registrar.c: Added contact ‘sips:702@70.44.10.180:38939;transport=TLS’ to AOR ‘702’ with expiration of 3600 seconds [2017-09-06 07:13:45] VERBOSE[2809] res\_pjsip/pjsip\_configuration.c: Contact 702/sips:702@70.44.10.180:38939;transport=TLS has been created [2017-09-06 07:13:45] ERROR[32309] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 [2017-09-06 07:13:45] ERROR[32309] res\_pjsip.c: Error 70007 ‘Not enough memory (PJ\_ENOMEM)’ sending NOTIFY request to endpoint 702 Thanks leon ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 3:43pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/2 "2017-09-06T15:43:05Z")
I am running ASterisk 14.6.1 Freepbx 14.0.1.4 ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 6, 2017, 4:08pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/3 "2017-09-06T16:08:21Z")
I haven’t seen any issues with such things and I’m aware of a few different major installs. It may be unique to your environment or what you are doing. More information would be useful. How many endpoints, subscriptions, type of transport, etc. ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 4:25pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/4 "2017-09-06T16:25:09Z")
AM using PJSip for endpoints. THis all worked under Asterisk 13/fpbx 12. very weird basically I have three physical extensions 701-703. 703 is not connected now so just two 701 and 702. I have multiple devices talking to those extensions around the house (all grandstream and a zoiper android client which I disabled last night to debug this) On my Watchguard firewall I noticed in my traffic management window I was noticed weird sip behavior with lots of sip traffic. see this display which is no where near as bad as it was last night going over 120kbps! ![image](https://global.discourse-cdn.com/asterisk/original/2X/3/3a11a11524c3d648267add67f63f434c7bef54a4.png) Usually the SIP traffic is a flat line with very low bandwidth. It was hoping all around last night. Also PJSIP extensions keep dropping out and I have to wait for the timers to expire. Going the debug log from last night you can see errors from the GXP2020 phone up above near the end of my original post. On 701 I have PJSIP set for 8 and on 702 I have it set to 6. I usually add an extra 2 count in case things get out of sync I have MWI subscriptions set on. WOuld you like to get access to the server? If so, please post me privately [wa4zlw@arrl.net](mailto:wa4zlw@arrl.net) WHat else do you need? I’ve been running top all night and the free memory keeps going down pops up a bit which is what I would expect but something doesnt seem right to me THanks leon ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 6, 2017, 4:28pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/5 "2017-09-06T16:28:06Z")
I don’t provide one on one help like that. You’d need to look at the log before errors occur to see if anything looks out of the ordinary, for example is the Asterisk server under attack? ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 4:37pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/6 "2017-09-06T16:37:55Z")
I also have BLF setup as well for the extensions no there is a firewall that freepbx runs so things are locked down. the log entries I entered into the ticket is whta I thought unusual and why I added them to the ticket. I looked at the previous ticket and it said to open a new one if you were not the original person which is what I did. One thing I did do is cut down from 3600 --\> 900 seconds the SIP max time other than that I’m stumped. thanks leon ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 4:46pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/7 "2017-09-06T16:46:57Z")
here’s another unregistration/disconnection: [2017-09-06 11:53:57] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 11:53:57] VERBOSE[15247] asterisk.c: Remote UNIX connection disconnected [2017-09-06 11:53:57] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 11:53:57] VERBOSE[15249] asterisk.c: Remote UNIX connection disconnected [2017-09-06 11:53:57] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 11:53:57] VERBOSE[15251] asterisk.c: Remote UNIX connection disconnected **[2017-09-06 12:02:41] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44141;transport=TLS is now Unreachable. RTT: 0.000 msec** [2017-09-06 12:36:03] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 12:36:03] VERBOSE[22779] asterisk.c: Remote UNIX connection disconnected [2017-09-06 12:36:03] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 12:36:03] VERBOSE[22781] asterisk.c: Remote UNIX connection disconnected [2017-09-06 12:36:03] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 12:36:03] VERBOSE[22783] asterisk.c: Remote UNIX connection disconnected ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 4:51pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/8 "2017-09-06T16:51:47Z")
more keep dropping like flies [2017-09-06 12:36:03] VERBOSE[21467] asterisk.c: Remote UNIX connection [2017-09-06 12:36:03] VERBOSE[22783] asterisk.c: Remote UNIX connection disconnected **[2017-09-06 12:49:43] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44142;transport=TLS is now Unreachable. RTT: 0.000 msec** **[2017-09-06 12:49:44] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44143;transport=TLS is now Unreachable. RTT: 0.000 msec** ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 6, 2017, 5:09pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/9 "2017-09-06T17:09:46Z")
That would mean that the TLS connection has dropped, or the endpoint did not respond to our OPTIONS request. ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 5:17pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/10 "2017-09-06T17:17:55Z")
my latency to the pbx is like 40ms and this just happened [2017-09-06 12:59:13] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44142;transport=TLS has been deleted [2017-09-06 12:59:13] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44141;transport=TLS has been deleted [2017-09-06 12:59:13] VERBOSE[369] res\_pjsip/pjsip\_configuration.c: Contact 701/sip:701@70.44.10.180:44143;transport=TLS has been deleted this is going on all day up and down…what about the other errors above? Thanks leon ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 6, 2017, 5:20pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/11 "2017-09-06T17:20:02Z")
I don’t really have anything to add. You can file an issue[1] with all the information you can. There’s no timeline on when it would get looked into, and as it only seems to be impacting you it could prove difficult to figure out. [1] [https://issues.asterisk.org/jira](https://issues.asterisk.org/jira) ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 5:45pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/12 "2017-09-06T17:45:42Z")
thanks just did that Leon ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 11:19pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/13 "2017-09-06T23:19:04Z")
there’s definitely a memory leak. I just rebooted the PBX and this is the TOP I get. Before I shut it down it was like 200000 free and was getting those memory errors again. Rebooted 9/6/17 @ 706PM top - 19:09:13 up 0 min, 1 user, load average: 1.72, 0.49, 0.17 Tasks: 112 total, 2 running, 110 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.3 us, 0.7 sy, 0.0 ni, 98.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem : 1883708 total, 1014856 free, 396464 used, 472388 buff/cache KiB Swap: 2097148 total, 2097148 free, 0 used. 1270676 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 998 asterisk 20 0 646616 20836 10252 S 1.0 1.1 0:00.03 httpd 811 mongodb 20 0 477776 47644 20452 R 0.3 2.5 0:00.10 mongod 1044 mysql 20 0 1171728 106336 9192 S 0.3 5.6 0:00.62 mysqld 2699 asterisk 20 0 1614280 71772 17004 S 0.3 3.8 0:04.14 asterisk 3544 asterisk 20 0 1081264 49708 14392 S 0.3 2.6 0:00.84 node /var/www/h 1 root 20 0 43292 3724 2420 S 0.0 0.2 0:00.86 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H 6 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u2:0 7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu\_bh 9 root 20 0 0 0 0 S 0.0 0.0 0:00.14 rcu\_sched 10 root rt 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 13 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd 15 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback 16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kintegrityd 17 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset 18 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd 19 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 md 20 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1 25 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kswapd0 26 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd 27 root 39 19 0 0 0 S 0.0 0.0 0:00.00 khugepaged 28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify\_mark 29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto 37 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld 38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u2:1 39 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kmpath\_rdacd 40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 41 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ipv6\_addrconf 60 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq 92 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 93 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:2 246 root 20 0 0 0 0 S 0.0 0.0 0:00.15 kworker/0:3 262 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata\_sff ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 6, 2017, 11:31pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/14 "2017-09-06T23:31:22Z")
another item is the phones still show registered yet the pbx doesnt ☹ ---
**Author:** ![wa4zlw](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/wa4zlw/32/2462_2.png) [@wa4zlw](https://community.asterisk.org/u/wa4zlw)\ **Post date:** [September 8, 2017, 6:54pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/15 "2017-09-08T18:54:11Z")
Hi folks…I’m running out of memory multiple times a day requiring manual reboot. This is not good for a live system. Is there anything you can please do to look at the stuff I already sent and/or see what the differences in from asterisk 13 to asterisk 14 with pjsip? Thanks in advance leon ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 8, 2017, 6:57pm UTC](https://community.asterisk.org/t/weird-pjsip-issues-and-possible-memory-lieak/71906/16 "2017-09-08T18:57:50Z")
You don’t need to post this in multiple places. As I stated on the issue, we’ll look into it as soon as we are able. As this is an open source project there is no timeframe on when things will get looked into or resolved.