# Use RTP stream without SIP **URL:** \ **Category:** Asterisk Support\ **Created:** [July 17, 2006, 4:12pm UTC](https://community.asterisk.org/t/use-rtp-stream-without-sip/7841 "2006-07-17T16:12:06Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![kylcmt](https://avatars.discourse-cdn.com/v4/letter/k/a9adbd/32.png) [@kylcmt](https://community.asterisk.org/u/kylcmt)\ **Post date:** [July 17, 2006, 4:12pm UTC](https://community.asterisk.org/t/use-rtp-stream-without-sip/7841/1 "2006-07-17T16:12:06Z")
Is there a way for asterisk to accept plain RTP traffic (no SIP setup) and automatically direct the stream to a meet me conference. For example, I want to stream RTP traffic to my asterisk box at ip: 192.168.10.5. The source of the RTP comes from 192.168.10.6 and is streaming to asterisk on port 5062. Can asterisk take the stream, seeing that it is coming from ip: 192.168.10.6 and is arriving on port 5062 and automatically direct that stream into a meetme conference? You may ask why I don’t simply incorporate the SIP protocol. At this stage, I have the RTP streaming working and I need to incorporate the stream ASAP and I don’t have time to add SIP support. Since RTP is the basis for SIP audio, I figured there must be a way to use the RTP alone. Thanks! Your help is much appreciated! ---
**Author:** ![IronHelix](https://avatars.discourse-cdn.com/v4/letter/i/da6949/32.png) [@IronHelix](https://community.asterisk.org/u/IronHelix)\ **Post date:** [July 18, 2006, 8:26am UTC](https://community.asterisk.org/t/use-rtp-stream-without-sip/7841/2 "2006-07-18T08:26:50Z")
sadly, I don’t think this is possible. If you could have a device create a SIP INVITE for the rtp stream asterisk could take it, but if not then I think you’re out of luck until you work in a SIP stack…