TDM22B FXS - Init Indirect Registers UNSUCCESSFULLY

I have a TDM22B that I already RMA’ed to the reseller for this reason. The replacement arrived and I just plugged it into the PCI slot. I still have both FXS modules on the card report “Init Indirect Registers UNSUCCESSFULLY” and then “Indirect Registers failed verification.” The FXS modules work fine.

So either the reseller is sending me crap, or there is an issue with my setup.

I have a SuSE 10.2 system installed from DVD with no patches as of yet.
I have a TDM20B that has no problems in this exact same slot. Both FXS modules work just fine.

Any suggestions? I can’t get yet another RMA until Monday, so I have the weekend to play with, just in case there is something on my end.

Here is the entire dmesg for the TDM22B:

ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Freshmaker version: 73
Freshmaker passed register test
!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 0: FAILED FXS (FCC)
!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 1: FAILED FXS (FCC)
Module 2: Installed – AUTO FXO (FCC mode)
Module 3: Installed – AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)