# SPA-3000 & Trixbox issues

**URL:** <https://community.asterisk.org/t/spa-3000-trixbox-issues/9022>\
**Category:** Asterisk Support\
**Created:** [September 7, 2006, 2:17am UTC](https://community.asterisk.org/t/spa-3000-trixbox-issues/9022 "2006-09-07T02:17:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![lemming86\_au](https://avatars.discourse-cdn.com/v4/letter/l/85e7bf/32.png) [@lemming86\_au](https://community.asterisk.org/u/lemming86_au)\
**Post date:** [September 7, 2006, 2:17am UTC](https://community.asterisk.org/t/spa-3000-trixbox-issues/9022/1 "2006-09-07T02:17:58Z")

</div>

Hello,  
I’m having two problems with my SPA-3000 & trixbox.  
Trixbox is totally up to date and the SPA has the latest firmware & was set up using the Australian Trixbox setup guide.

The first problem is, when anyone calls on the PSTN and get a menu or voicemail, after a couple of seconds they become garbled, although calls seem to be unaffected.

The second problem is after a call from the PSTN is finished, if they hang up first its fine, but if i hang up my asterisk extension first, the SPA does not disconnect the line until the other party has hung up and it detects the disconnect tone. So i assume this is an issue between Trixbox & the SPA.

Any ideas?