Rxfax crashing asterisk

I am running Trixbox: Asterisk 1.2.13 svn rev 47264.

from the CLI and debug SIP peer 2292 (my fax on an ATA):

– Executing Goto(“SIP/2292-085e28f0”, “ext-fax|in_fax|1”) in new stack
– Goto (ext-fax,in_fax,1)
– Executing StopPlayTones(“SIP/2292-085e28f0”, “”) in new stack
– Executing GotoIf(“SIP/2292-085e28f0”, “1?3:analog_fax|1”) in new stack
– Goto (ext-fax,in_fax,3)
– Executing Macro(“SIP/2292-085e28f0”, “faxreceive”) in new stack
– Executing Set(“SIP/2292-085e28f0”, “FAXFILE=/var/spool/asterisk/fax/1168358714.0.tif”) in new stack
– Executing Set(“SIP/2292-085e28f0”, "EMAILADDR=rgm@htt-consult.com") in new stack
– Executing RxFAX(“SIP/2292-085e28f0”, “/var/spool/asterisk/fax/1168358714.0.tif”) in new stack
We’re at 192.168.2.218 port 11928
Adding codec 0x4 (ulaw) to SDP
Adding codec 0x8 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (no NAT) to 192.168.2.203:5060:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.2.203:5060;branch=z9hG4bK-d0efad2f;received=192.168.2.203From: DEN FAX sip:2292@sip.htt-consult.com;tag=176abf23da4ab237o1
To: sip:666@sip.htt-consult.com;tag=as176d8426
Call-ID: b11f0293-6ffdc587@192.168.2.203
CSeq: 102 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Contact: sip:666@192.168.2.218
Content-Type: application/sdp
Content-Length: 238

v=0
o=root 2568 2568 IN IP4 192.168.2.218
s=session
c=IN IP4 192.168.2.218
t=0 0
m=audio 11928 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

Where am I going wrong???

I’ve had rxfax crash my system too. You need to be very careful running compatible versions. I’d dowload and install Trixbox again and not update Asterisk.