ProTech MV-372 GSM getewey

Asterisk Asterisk General
#1

Hi … I need some help with it …
I configured it, and its all ok … it is reciving and sending calls. But ther is one smol problem … it tray tu register with caller id in may asterisk 1.6.20. ewery 30 sec. Can some one help me with it … how to fix it or disable the worning …

[Feb 10 00:28:48] NOTICE[6385]: chan_sip.c:22325 handle_request_register: Registration from ‘sip:+37122038550@10.66.15.116’ failed for ‘10.66.15.206’ - No matching peer found
[Feb 10 00:29:31] NOTICE[6385]: chan_sip.c:22325 handle_request_register: Registration from ‘sip:+37122038550@10.66.15.116’ failed for ‘10.66.15.206’ - No matching peer found
[Feb 10 00:29:48] NOTICE[6385]: chan_sip.c:22325 handle_request_register: Registration from ‘sip:+37122038550@10.66.15.116’ failed for ‘10.66.15.206’ - No matching peer found
[Feb 10 00:30:31] NOTICE[6385]: chan_sip.c:22325 handle_request_register: Registration from ‘sip:+37122038550@10.66.15.116’ failed for ‘10.66.15.206’ - No matching peer found
[Feb 10 00:30:48] NOTICE[6385]: chan_sip.c:22325 handle_request_register: Registration from ‘sip:+37122038550@10.66.15.116’ failed for ‘10.66.15.206’ - No matching peer found
localhost*CLI>

#2

You really need to attack this at the gateway side.

Obviously you could fix it by configuring Asterisk for dynamic hosts and adding a section to match the international phone number (I’m not sure if it will be happy with the “+”), but if you have a fixed IP address, it is probably more secure to use that than enable registration.

This should have been on Asterisk Support.