# PRI registation reject on PJSIP but work on SIP **URL:** \ **Category:** Asterisk SIP\ **Created:** [August 31, 2023, 8:52am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439 "2023-08-31T08:52:13Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![ankit.hirwane](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/ankit.hirwane/32/6113_2.png) [@ankit.hirwane](https://community.asterisk.org/u/ankit.hirwane)\ **Post date:** [August 31, 2023, 8:52am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439/1 "2023-08-31T08:52:13Z")
Hi team , I’m trying to convert my setup sip to PJSIP but i have faced on issue there is PRI registration below configuration is pjsip but if i’m using SIP then it will work properly please suggest me what i need to do in PJSIP conf file and why ?? it is not register on PJSIP. [global] type = global user\_agent = LITE PBX debug = no [transport-udp] type = transport protocol = udp bind = 0.0.0.0:5060 local\_net = 192.XXX.XX.0/255.255.252.0 [reg\_10.X.XXX.197] type = registration retry\_interval = 60 max\_retries = 0 contact\_user = +91224XXX6799 expiration = 120 transport = transport-udp outbound\_auth = auth\_reg\_10.X.XXX.197 client\_uri = sip:+91224XXX6799@mu.ims.airtel.in:5060 server\_uri = sip:10.X.XXX.197:5060 [auth\_reg\_10.X.XXX.197] type = auth password = Tataca#1 username = +91224XXX6799@mu.ims.airtel.in [7XX1] type = aor contact = sip:10.X.XXX.197:5060 maximum\_expiration = 3600 default\_expiration = 300 [7XX1] type = identify endpoint = 7XX1 match = 10.X.XXX.197 [7XX1] type = auth username = 7XX1 password = Tataca#1 [7XX1] type = endpoint context = outgoing dtmf\_mode = rfc4733 disallow = all allow = alaw allow = ulaw rtp\_symmetric = yes rtp\_timeout = 60 outbound\_proxy = 10.X.XXX.197 direct\_media = no callerid = LITE call\_group = 1 pickup\_group = 1 allow\_transfer = yes from\_user = +91224XXX6799@mu.ims.airtel.in from\_domain = 10.X.XXX.197 language = En auth = 7XX1 outbound\_auth = 7XX1 aors = 7XX1 ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [August 31, 2023, 9:09am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439/2 "2023-08-31T09:09:37Z")
You haven’t shown what actually happens, such as the console output or SIP trace (pjsip set logger on). You should also provide the working configuration from chan\_sip. ---
**Author:** ![ankit.hirwane](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/ankit.hirwane/32/6113_2.png) [@ankit.hirwane](https://community.asterisk.org/u/ankit.hirwane)\ **Post date:** [August 31, 2023, 9:58am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439/3 "2023-08-31T09:58:45Z")
> [@ankit.hirwane](#): > > 91224XXX6799 Dear sir, Please check the chan\_sip configuration ; **SIP.CONF General Section** \*\*\*\*\*\*\*\* [general] context=FROMOTHERPBX ;context=outbound websocket\_enabled = false port=5060 bindaddr=0.0.0.0:5060 qualify=yes srvlookup=yes disallow=all allow=alaw nat=no callerid = LITE autocreatepeer=yes autodomain=yes localnet=192.168.80.0/255.255.252.0 canreinvite=no language=En allowtransfer=yes realm=telunet domain=192.168.80.23 maxexpiry=3600 defaultexpiry=300 useragent=LITE PBX usereqphone = yes dtmfmode = info alwaysauthreject = no regcontext=sipregistrations rtptimeout=60 rtpholdtimeout=300 rtcachefriends=yes ;--------------------------- SIP DEBUGGING --------------------------------------------------- sipdebug = no registertimeout=60 registerattempts=0 callgroup=1 pickupgroup=1 callevents=yes register =\> +91224XXX6799@mu.ims.airtel.in:Tataca#1:+91224XXX6799@mu.ims.airtel.in@10.X.XXX.197:5060/+91224XXX6799 [7XX1] ;;;========================================Airtel SIP Trunk - 30 Channles type=peer host=10.X.XXX.197 outboundproxy=10.X.XXX.197 fromdomain=10.X.XXX.197 dtmfmode=rfc2833 fromuser=+91224XXX6799@mu.ims.airtel.in secret=Tataca#1 directrtpsetup=no directmedia=no canreinvite=no reinvite=no insecure=invite nat=comedia context=outgoing disallow=all allow=alaw allow=ulaw qualify=yes port=5060 ---
**Author:** ![david551](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@david551](https://community.asterisk.org/u/david551)\ **Post date:** [August 31, 2023, 10:35am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439/4 "2023-08-31T10:35:33Z")
You haven’t set the contact user, so s will be used. It is not normal to have a port number in an address of record. ---
**Author:** ![system](https://global.discourse-cdn.com/asterisk/original/2X/4/475d0c889911cfb84ac4881ad6df8b523e3f9105.png) [@system](https://community.asterisk.org/u/system)\ **Post date:** [September 30, 2023, 10:35am UTC](https://community.asterisk.org/t/pri-registation-reject-on-pjsip-but-work-on-sip/98439/5 "2023-09-30T10:35:39Z")
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.