Getting Asterisk setup here in the office. I can make outbound calls. But inbound only works if i have a Wide range of Ports opened between 1-6000
I followed Broadvoice suggestions for ports they are.
69-69 UDP
5060-5063 UDP
10000-20000 UDP
With that I can make outbound calls but no inbound.
Ideas?
TCP
5038 Asterisk Manager
5060 SIP ( Sometimes needed )
UDP
10000 - 20000 RTP Media
2727 MGCP
4569 IAX2
5036 IAX
5060 SIP
Sample firewall rules that might help
voip-info.org/tiki-index.php … ll%20rules
Good Luck,
Dan
Thanks Dan, I got the ports setup. Inbound calls come in now but no ringing for the inbound caller. Ideas?
Steve
You actually have to tell asterisk to make the ringing noise. If you want all of your calls to ring, add this bit to your ‘s’ extension.
[default]
exten => s,1,Ringing()
exten => s,2,Wait(2)
This will make all calls coming in / going out through the default extension ringing for two seconds before answering. Check out this link, it give a little more explaination.
voip-info.org/tiki-index.php … g#comments
Dan
What type of firewall (or most likely actually a FILTER by definition) are you using ?
Depending on the stateful capabilities, the requirements change. I can help if I know what you’re using…
Sonick,
Sonicwall PRO 2040 Standard
Firmware Version: SonicOS Standard 3.1.0.7-77s
dmikusa,
Can you do this in *@home?
Steve