# Please I need your Support LIBPRI **URL:** \ **Category:** DAHDI\ **Created:** [September 25, 2023, 12:47pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829 "2023-09-25T12:47:03Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![cige](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@cige](https://community.asterisk.org/u/cige)\ **Post date:** [September 25, 2023, 12:47pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/1 "2023-09-25T12:47:03Z")
Hello, I am getting this issue, when I try to download the Libpri package, I am getting as follows: wget [http://downloads.asterisk.org/pub/telephony/libpri/libpri-current.tar.gz](http://downloads.asterisk.org/pub/telephony/libpri/libpri-current.tar.gz) –2023-09-25 15:43:34-- [http://downloads.asterisk.org/pub/telephony/libpri/libpri-current.tar.gz](http://downloads.asterisk.org/pub/telephony/libpri/libpri-current.tar.gz) Resolving [downloads.asterisk.org](http://downloads.asterisk.org) ([downloads.asterisk.org](http://downloads.asterisk.org))… 165.22.184.19, 2604:a880:400:d0::14:9001 Connecting to [downloads.asterisk.org](http://downloads.asterisk.org) ([downloads.asterisk.org](http://downloads.asterisk.org))|165.22.184.19|:80… connected. HTTP request sent, awaiting response… 500 Internal Server Error 2023-09-25 15:43:35 ERROR 500: Internal Server Error. Note: If I use : wget [http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.1.tar.gz](http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.1.tar.gz), It will accept. But after the CLI: No such command ‘pri show spans’ (type ‘core show help pri show’ for other possible commands) ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 25, 2023, 12:53pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/2 "2023-09-25T12:53:08Z")
After building and installing libpri Asterisk has to be rebuilt with support for it. This is done by re-running configure and rebuilding Asterisk. ---
**Author:** ![cige](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@cige](https://community.asterisk.org/u/cige)\ **Post date:** [September 25, 2023, 1:43pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/3 "2023-09-25T13:43:26Z")
Do you mean First Install Libpri, and the Rebuild asterisk? ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [September 25, 2023, 1:45pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/4 "2023-09-25T13:45:20Z")
Yes. ---
**Author:** ![cige](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@cige](https://community.asterisk.org/u/cige)\ **Post date:** [September 25, 2023, 2:20pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/5 "2023-09-25T14:20:01Z")
Thanks. I will. ---
**Author:** ![FrancoSmash](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/francosmash/32/6689_2.png) [@FrancoSmash](https://community.asterisk.org/u/FrancoSmash)\ **Post date:** [September 25, 2023, 2:20pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/6 "2023-09-25T14:20:53Z")
wget [http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.1.tar.gz](http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.1.tar.gz) tar -zvxf libpri-1.6.1.tar.gz cd libpri-1.6.1 make clean make make install But first make sure you’ve installed dahdi. THEN & only then you can install/ build asterisk ---
**Author:** ![cige](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@cige](https://community.asterisk.org/u/cige)\ **Post date:** [September 25, 2023, 2:58pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/7 "2023-09-25T14:58:35Z")
Thanks for your reply. ---
**Author:** ![FrancoSmash](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/francosmash/32/6689_2.png) [@FrancoSmash](https://community.asterisk.org/u/FrancoSmash)\ **Post date:** [September 25, 2023, 3:14pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/8 "2023-09-25T15:14:59Z")
Of course you need to build Dahdi before Libpri. 😉 ---
**Author:** ![system](https://global.discourse-cdn.com/asterisk/original/2X/4/475d0c889911cfb84ac4881ad6df8b523e3f9105.png) [@system](https://community.asterisk.org/u/system)\ **Post date:** [October 26, 2023, 3:15pm UTC](https://community.asterisk.org/t/please-i-need-your-support-libpri/98829/9 "2023-10-26T15:15:26Z")
This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.