# PLease help!

**URL:** <https://community.asterisk.org/t/please-help/10736>\
**Category:** Asterisk Support\
**Created:** [November 27, 2006, 3:25pm UTC](https://community.asterisk.org/t/please-help/10736 "2006-11-27T15:25:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kritikia1](https://avatars.discourse-cdn.com/v4/letter/k/3be4f8/32.png) [@kritikia1](https://community.asterisk.org/u/kritikia1)\
**Post date:** [November 27, 2006, 3:25pm UTC](https://community.asterisk.org/t/please-help/10736/1 "2006-11-27T15:25:37Z")

</div>

Hello all,

I need your help!!!  
I have installed an analogue card, a TDM400P with two modules,one FXS and one FXO…On the FXS port i have attached an analog phone and on the FXO port i have connected the PSTN line…  
For these two, I have two different channels and two different contexts.  
I have problem with the calls that comes from outside.I put firstly s,1,Answer and then s,2,Dial(from-sip,200,1) because I want to place a call to this particular number…

The result is:  
– Starting simple switch on ‘Zap/2-1’  
== Starting Zap/2-1 at out,s,1 failed so falling back to exten ‘s’  
== Starting Zap/2-1 at out,s,1 still failed so falling back to context ‘default’  
– Executing [s@default:1] Wait(“Zap/2-1”, “1”) in new stack  
– Executing [s@default:2] Answer(“Zap/2-1”, “”) in new stack  
[Nov 27 17:22:46] DEBUG[7929]: chan\_zap.c:2789 zt\_answer: Took Zap/2-1 off hook  
[Nov 27 17:22:46] DEBUG[7929]: chan\_zap.c:1458 zt\_enable\_ec: Enabled echo cancellation on channel 2  
[Nov 27 17:22:46] DEBUG[7929]: chan\_zap.c:1477 zt\_train\_ec: No echo training requested  
– Executing [s@default:3] Set(“Zap/2-1”, “TIMEOUT(digit)=5”) in new stack  
– Digit timeout set to 5  
– Executing [s@default:4] Set(“Zap/2-1”, “TIMEOUT(response)=10”) in new stack  
– Response timeout set to 10  
– Executing [s@default:5] BackGround(“Zap/2-1”, “demo-congrats”) in new stack

P.S when I have both of my channels in the same context ,I have problem with the analog phone ,because when I pick the phone to call some number it calls immediately the 200…(as I put in my dial plan)–If i do any modification I run to the same problem that I posted to you before.

Please help me!!!  
Thanks!

---

<div class="post-metadata">

**Author:** ![baconbuttie](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/baconbuttie/32/916_2.png) [@baconbuttie](https://community.asterisk.org/u/baconbuttie)\
**Post date:** [November 27, 2006, 8:06pm UTC](https://community.asterisk.org/t/please-help/10736/2 "2006-11-27T20:06:22Z")

</div>

you’ll need to post your zapata.conf, your extensions.conf for the appropriate contexts, and a log file fragment for the entire failed call.