Hi, I’m configuring an outbound route in FreePBX. I define the caller ID for the outbound route, the trunk, and the extension. I’ve also tried defining the caller ID for each one, leaving the other two blank. However, I hope the “from” field doesn’t come out as anonymous so the provider can identify me and make the call.
The question is, where can I configure the caller ID so that the caller ID appears as “my name” <123456768>? Keep in mind that I can’t test it through a softphone because access is limited. So, I’ll try it through the console.
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP <ip_asterisk>:5060;rport;branch=z9hG4bKPj47afda53-5530-4ff1-ab3a-4047d417d06d
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=7d0c5a8e-000c-46a0-880a-94ae1e72fbec
To: <sip:9<my numb phone>@<gateway_VoIP>>;tag=AC50FE40-114B
Date: Tue, 15 Apr 2025 19:49:39 GMT
Call-ID: f0f95459-ff50-414b-8b6a-6a7d1f4814ae
CSeq: 3385 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-17.9.5a
Reason: SIP:cause=403;text="ACCESO_NO_AUTORIZADO_A_CANTV._REVISE_CONFIGURACION_DEL_EQUIPO"
Session-ID: 00000000000000000000000000000000;remote=751c5f126a9c5230aaabc04e0cae27de
Content-Length: 0