# Network Monitoring integration

**URL:** <https://community.asterisk.org/t/network-monitoring-integration/82224>\
**Category:** Asterisk Integration\
**Created:** [January 9, 2020, 10:46am UTC](https://community.asterisk.org/t/network-monitoring-integration/82224 "2020-01-09T10:46:29Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Number33](https://avatars.discourse-cdn.com/v4/letter/n/3da27b/32.png) [@Number33](https://community.asterisk.org/u/Number33)\
**Post date:** [January 9, 2020, 10:46am UTC](https://community.asterisk.org/t/network-monitoring-integration/82224/1 "2020-01-09T10:46:29Z")

</div>

Hi,

I’m wondering if anyone in the community has been able to integrate PRTG network monitoring with asterisk and/or FreePBX to trigger notification calls based on a sensor going down?

I’m trying to achieve the below workflow, without success so any thoughts welcome.

Server fails which causes an alarm to be triggered, PRTG generates a HTTP post to trigger automated call and payout of a pre-defined message to a call group.

Thanks

---

<div class="post-metadata">

**Author:** ![hsunryou](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/hsunryou/32/3968_2.png) [@hsunryou](https://community.asterisk.org/u/hsunryou)\
**Post date:** [January 10, 2020, 4:40am UTC](https://community.asterisk.org/t/network-monitoring-integration/82224/2 "2020-01-10T04:40:08Z")

</div>

a few years ago  
Using Zabbix, I was monitor asterisk with SNMP.  
I thought PRTG support SNMP. how about using SNMP?

---

<div class="post-metadata">

**Author:** ![Number33](https://avatars.discourse-cdn.com/v4/letter/n/3da27b/32.png) [@Number33](https://community.asterisk.org/u/Number33)\
**Post date:** [January 10, 2020, 8:53am UTC](https://community.asterisk.org/t/network-monitoring-integration/82224/3 "2020-01-10T08:53:50Z")

</div>

Hi hsunryou,

What I’m trying to achieve is more an integration, so it not that I need to monitor Asterisk with PRTG but rather incorporate Asterisk into the monitoring solution, so in the can of say a web server going down out of hours instead of the standard just the standard email from PRTG to the support team it would also initiate a call to the on call engineer and play out a message saying the web server is down.

---

<div class="post-metadata">

**Author:** ![johnkiniston](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/johnkiniston/32/28_2.png) [@johnkiniston](https://community.asterisk.org/u/johnkiniston)\
**Post date:** [January 10, 2020, 3:08pm UTC](https://community.asterisk.org/t/network-monitoring-integration/82224/4 "2020-01-10T15:08:34Z")

</div>

You could use the Originate AMI action to place a automated call.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/asterisk/original/2X/4/475d0c889911cfb84ac4881ad6df8b523e3f9105.png) [@system](https://community.asterisk.org/u/system)\
**Post date:** [February 9, 2020, 3:08pm UTC](https://community.asterisk.org/t/network-monitoring-integration/82224/5 "2020-02-09T15:08:45Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.