Hi,
I’ve got an * system with a 4 bri B410P for incoming calls.
I’ve been using this system for a month and then I’ve switched my telephony provider and have connected the four bri to a different telephony system: “oneAccess ONE100”.
After this change I’ve noticed that the B410P leds blink when not in use when before they were always in green.
I’ve also noticed this message on my * console:
"P[ x] --> not yet handled: facility type:0xffff"
being x a variable number.
I’ve not been able to find any information about this message so I don’t know if it is severe or not. Everything seems to be working fine but I’d like to know which is the cause for those messages.
I’d be grateful if someone would provide me with any clue or advice.
Thanks in advance.
Juan MarÃa Gil.
My misdn-init.conf:
card=1,0x4
te_ptmp=1,2,3,4
poll=128
dsp_options=0
debug=0
My misdn.conf:
[code][general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=bri-in
language=es
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=no
reject_cause=16
need_more_infos=no
nttimeout=no
method=standard
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
nodialtone=no
presentation=-1
screen=-1
echocancel=yes
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=no
max_incoming=-1
max_outgoing=-1
[rdsi]
msns=*
ports=1,2,3,4
context=bri-in
[/code]