Hi everyone, I have Asterisk 13.11 installed in a debian 8 machine. The memory consumption of asterisk rises with time until it is killed by the system with an Out of memory error, or i restart the service. I had the same problem with 13.5. I do a lot of outbound dialing using AMI Originate, and i…

Working on the same problem over here… [image] Help finding a memory leak Asterisk Support New 13.5 installation on an i7 with 16 GB of RAM and 2x SSDs. Low usage, but memory grows about 8% per day under load. This site is closed after hours, so the usage stops growing at…

Hello again. So, yesterday at this time, asterisk was taking 51% of memory, and after two hours it would reach 90%, and eventually be killed if i don’t restart it. What i did was disabling logging to a file, and reduced the logs for console to error only, and it seems that solved the problem, sinc…

The monologue continues The memory consumption started to grow again, and at this rate, the memory will be saturated in a few hours. So that means that disabling the logs wasn’t effective, but i have no idea why the memory usage didn’t start growing until the aternoon. I have 12G of ram, so it’s…

Yeah, I think this is related to @mkozusnik ’s issue. I’m investigating now.

Do you use realtime for voicemail or sip peers? If so, do you have rtpcachefriends set to yes or no?

No, i use sip.conf for sip peers, and don’t use voicemail. I mainly do outbound calls, and just a few inbound calls that go to a queue. And i also use odbc extensively. I just installed 13.11.2, i’ll see tomorrow if there is any improvment.

OK, I think you have a different issue than @mkozusnik . The output from ‘core show taskprocessors’ will at least tell us if the internal queues are backing up.

Thank you for your time Below is the output of core show taskprocessors. There is a line where “In queue” is high subm:manager_topic-00000006 3942894 106211 106349 2700 3000 If this is related to AMI? because i do a lot of outbound calls using AMI Originate, sometimes 10-20 per second, and i also…

[image] issam: subm:manager_topic-00000006 3942894 106211 106349 2700 3000 Those are not good numbers. [image] issam: If this is related to AMI? because i do a lot of outbound calls using AMI Originate, sometimes 10-20 per second, and i also send …

Ok, i found the problem. It is indeed related to AMI. For each call connected, a web page is opened and there is a connection to manager via http. I log in and then execute an action. This is done for each call. The problem here is that i wasn’t logging off. This didn’t cause any problem in previou…

Memory consumption rising with time

Asterisk Asterisk Support

mkozusnik September 14, 2016, 12:57am 2

Working on the same problem over here…

Topic		Replies	Views
Help finding CPU comsumption Asterisk Support	3	1511	January 15, 2018
Memory leak consumes 16GB in less then 24 hours Asterisk Support	16	6673	October 3, 2018
Help finding a memory leak Asterisk Support	102	9828	October 6, 2016
Memory leak problem Asterisk Support	16	1152	June 18, 2014
Possible memory leak in Asterisk v16.29.0 Asterisk Support	8	684	January 14, 2023

Memory consumption rising with time

Related topics