# Line 2 outbound

**URL:** <https://community.asterisk.org/t/line-2-outbound/87471>\
**Category:** Asterisk Hardware\
**Created:** [February 8, 2021, 7:49pm UTC](https://community.asterisk.org/t/line-2-outbound/87471 "2021-02-08T19:49:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TVining](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@TVining](https://community.asterisk.org/u/TVining)\
**Post date:** [February 8, 2021, 7:49pm UTC](https://community.asterisk.org/t/line-2-outbound/87471/1 "2021-02-08T19:49:32Z")

</div>

I have a Carrier giving me 2 lines FXS, and I run that into 2 FXS ports on my FreePBX server.  
Line 1 functions as advertised.  
Line 2 will give a busy signal when making outbound calls. Always. Not inbound- those work fine. But no outbound service. The routes go to my POTS trunk, and everything else seems to be right.  
What have I messed up?

Tony

---

<div class="post-metadata">

**Author:** ![david551](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@david551](https://community.asterisk.org/u/david551)\
**Post date:** [February 8, 2021, 9:12pm UTC](https://community.asterisk.org/t/line-2-outbound/87471/2 "2021-02-08T21:12:49Z")

</div>

FreePBX support is provided through [https://community.freepbx.org/](https://community.freepbx.org/)

Analogue port support is provided through the commercial channels of the hardware vendor.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/asterisk/original/2X/4/475d0c889911cfb84ac4881ad6df8b523e3f9105.png) [@system](https://community.asterisk.org/u/system)\
**Post date:** [March 10, 2021, 9:13pm UTC](https://community.asterisk.org/t/line-2-outbound/87471/3 "2021-03-10T21:13:12Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.