Hi All,
I have four ISDN lines. And I am using 3rd line for sending fax. I am using hylafax for sending and receiving faxes on my server.
But I am facing problem.
Below is the log
-- Executing [XXXXXXXXXX@fax-out:1] Dial("IAX2/iaxmodem2-5087", "mISDN/3/xxxxxxxxxxxxx") in new stack
P[ 3] channel with stid:0 for one second still in use!
P[ 0] --> * NEW CHANNEL dad:xxxxxxxxxxxxx oad:(null)
P[ 3] * Queuing chan 0x8ac55f8
P[ 3] read_config: Getting Config
P[ 3] --> TON: Unknown
P[ 3] --> LTON: Unknown
P[ 3] --> CTON: Unknown
P[ 3] * CALL: 3/xxxxxxxxxxxxx
P[ 3] --> * dad:XXXXXXXXXXX tech:mISDN/4-u40 ctx:from-misdn-pstn
P[ 3] --> * adding2newbc ext xxxxxxxxxxxxx
P[ 3] --> * adding2newbc callerid 77535
P[ 3] --> pres: -1 screen: -1
P[ 3] --> pres: 0
P[ 3] --> PRES: Allowed (0x0)
P[ 3] --> SCREEN: Unscreened (0x0)
P[ 3] NO OPTS GIVEN
P[ 3] I SEND:SETUP oad:77535 dad:xxxxxxxxxxxxx pid:18
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:0 l3id:90009 b_stid:0 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> new_l3id 9000a
P[ 3] Sending msg, prim:30580 addr:41000304 dinfo:9000a
P[ 3] --> * SEND: State Dialing pid:18
– Called 3/xxxxxxxxxxxxx
P[ 3] MGMT: SSTATUS: L2_ESTABLISH
P[ 3] handle_frm: frm->addr:42000303 frm->prim:30282
P[ 3] set_channel: bc->channel:255 channel:1
P[ 3] I IND :NEW_CHANNEL oad:77535 dad:xxxxxxxxxxxxx pid:18 state:CALLING
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:0 l3id:9000a b_stid:0 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> updating channel name to [mISDN/5-u41]
P[ 3] --> found chan (preselected): 1
P[ 3] set_chan_in_stack: 1
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] I IND 
ROCEEDING oad:77535 dad:xxxxxxxxxxxxx pid:18 state:CALLING
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:50010302 l3id:9000a b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> updating channel name to [mISDN/5-u42]
– mISDN/5-u42 is proceeding passing it to IAX2/iaxmodem2-5087
P[ 3] BCHAN: bchan ACT Confirm pid:18
P[ 3] handle_frm: frm->addr:42000303 frm->prim:37b82
P[ 3] I IND :INFORMATION oad:77535 dad:xxxxxxxxxxxxx pid:18 state:PROCEEDING
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:50010302 l3id:9000a b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> None
[Mar 23 12:32:26] DTMF[15657]: channel.c:2116 __ast_read: DTMF end '[Mar 23 12:32:26] DTMF[15657]: channel.c:2152 __ast_read: DTMF begin emulation of 'P[ 3] handle_frm: frm->addr:42000303 frm->prim:34582
P[ 3] I IND 
ISCONNECT oad:77535 dad:xxxxxxxxxxxxx pid:18 state:PROCEEDING
P[ 3] --> channel:1 mode:TE cause:1 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:8 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:50010302 l3id:9000a b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] $$$ find_holded: --> holded:0 channel:0
P[ 3] $$$ find_holded: --> holded:0 channel:0
P[ 3] --> org:1 nt:0, inbandavail:1 state:6
P[ 3] --> Inband Info Avail, not sending RELEASE
[Mar 23 12:32:26] DTMF[15657]: channel.c:2261 __ast_read: DTMF end emulation of '[Mar 23 12:32:29] NOTICE[14467]: chan_iax2.c:6196 update_registry: Restricting registration for peer ‘iaxmodem’ to 60 seconds (requested 3000)
P[ 3] handle_frm: frm->addr:42000303 frm->prim:34d82
P[ 3] I IND :RELEASE oad:77535 dad:xxxxxxxxxxxxx pid:18 state:DISCONNECTED
P[ 3] --> channel:1 mode:TE cause:1 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> caps:Speech pi:8 keypad: sending_complete:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> addr:50010302 l3id:9000a b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> queue_hangup
P[ 3] * RELEASING CHANNEL pid:18 ctx:from-misdn-pstn dad:xxxxxxxxxxxxx oad:xxxxxxxxxxxxx state: DISCONNECTED
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] handle_frm: frm->addr:42000303 frm->prim:3f182
P[ 3] --> lib: RELEASE_CR Ind with l3id:9000a
P[ 3] --> lib: CLEANING UP l3id: 9000a
P[ 3] $$$ CLEANUP CALLED pid:18
P[ 3] $$$ Cleaning up bc with stid :10010300 pid:18
P[ 3] --> ec_disable
P[ 3] Sending Control ECHOCAN_OFF
P[ 3] ph_control: c1:2319 c2:0
P[ 3] empty_chan_in_stack: 1
P[ 3] BCHAN: MGR_DELLAYER|CNF pid:18
[Mar 23 12:32:29] DEBUG[15657]: chan_misdn.c:2434 misdn_hangup: misdn_hangup(mISDN/5-u42)
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel ‘IAX2/iaxmodem2-5087’ status is ‘CHANUNAVAIL’
– Hungup ‘IAX2/iaxmodem2-5087’
From the above log, I found that call is starting from line 3 and ending at line 5th.
Please let me know what should i do to fix this issue?
Please help me.
Thanks
Samir Doshi