I need help


#1

manger ‘basil’ logged off from 127.0.0.1
manger ‘basil’ logged on from 127.0.0.1

what means this message !!! it’s problem !!!


#2

That is not an accurate transcription of the message - please scrape from the screen as subtle differences can sometimes be important. It refers to AMI logons and logoffs. It is not of any concern on its own, as we have no idea how your AMI application operates. Generally, if there is a problem, it will be a secondary effect, and you should concentrate on the primary symptom.


#3

==manager ‘basil’ logged on from 127.0.0.1
==manager ‘basil’ logged off from 127.0.0.1

manager.conf

[basil]
secret = nofear
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate


#4

Hi

Firstlt dont post passwords to forums. its a school boy mistake.

as to [quote]what means this message !!! it’s problem !!![/quote]

its not a problem its telling you that some script of user with the manager account of basil has connected and disconnected from the local machine.

So you need to find out what the script is ?

Ian


#5

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel® Xeon™ CPU 2.80GHz
stepping : 3
cpu MHz : 2800.313
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pgepse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constaitor ds_cpl cid cx16 xtpr
bogomips : 5600.62

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel® Xeon™ CPU 2.80GHz
stepping : 3
cpu MHz : 2800.313
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pgepse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constaitor ds_cpl cid cx16 xtpr
bogomips : 5600.22


#6

You seem to have changed subject.

I have no idea why you have included your processor specifications.

Your choice of codec depends on lots of factors which you haven’t provided.

I’m almost certain that the Latvian site:

  • is on dodgy grounds with the “Asterisk” tradename;
  • will be supplying a G.729 codec with an invalid licence.

Although I haven’t checked exactly what is being supplied, the most common G.729 codec that purports to be open source is based on source code which has a restriction on commercial use, which is incompatible with the GPL licence the derived code claims to use, and also incompatible with the official definition of “open source”. The need for patent royalties would also make the GPL licence void.

If you want to use G.729, the only realistic alternative for Asterisk is the one supplied by Digium, with a commercial licence fee.

It is sometimes possible to use Asterisk in a pass through mode in which it never needs to transcode in and out of G.729, but passes it between end points.


#7

Removed link to Patent and Asterisk license-violating junk.