# Hunt and memoryhunt don't work, ringall works

**URL:** <https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189>\
**Category:** Asterisk Support\
**Created:** [December 17, 2005, 10:50am UTC](https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189 "2005-12-17T10:50:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![solarisdreams](https://avatars.discourse-cdn.com/v4/letter/s/cab0a1/32.png) [@solarisdreams](https://community.asterisk.org/u/solarisdreams)\
**Post date:** [December 17, 2005, 10:50am UTC](https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189/1 "2005-12-17T10:50:46Z")

</div>

I have a ring group set up. If I set it to ringall, it works great. If I set it to hunt, it goes straight to the “if no answer” option (which is set to my primary extensions voicemail. What I am trying to do is ring ext 2002, followed by 8002, followed by my cell, followed by my voicemail if no answer.

Any ideas? Is this a known bug?

Thanks,  
-V

---

<div class="post-metadata">

**Author:** ![zerok](https://avatars.discourse-cdn.com/v4/letter/z/bc79bd/32.png) [@zerok](https://community.asterisk.org/u/zerok)\
**Post date:** [April 13, 2006, 4:47pm UTC](https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189/2 "2006-04-13T16:47:07Z")

</div>

I am running A@H 2.7 and having the exact same issue. Have you had any luck finding a solution?

---

<div class="post-metadata">

**Author:** ![RichardHH](https://avatars.discourse-cdn.com/v4/letter/r/a4c791/32.png) [@RichardHH](https://community.asterisk.org/u/RichardHH)\
**Post date:** [April 13, 2006, 5:01pm UTC](https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189/3 "2006-04-13T17:01:24Z")

</div>

Are you sure that a “ringgroup” is supporting this ?  
I doubt …

Technically, ringgroup is…a RINGGROUP !

Means:  
AAH does implicate a ringroup like this in the extensions.conf:

exten…dial (SIP/XX&SIP/XX&IAX2…) etc etc

Its a “simultan” ringer but it wont support any other ringstrategy.

For that, you need to put these devices in a queue group and configure it to the appropiate ring strategy.

---

<div class="post-metadata">

**Author:** ![zerok](https://avatars.discourse-cdn.com/v4/letter/z/bc79bd/32.png) [@zerok](https://community.asterisk.org/u/zerok)\
**Post date:** [April 13, 2006, 6:26pm UTC](https://community.asterisk.org/t/hunt-and-memoryhunt-dont-work-ringall-works/3189/4 "2006-04-13T18:26:24Z")

</div>

A@H has a syntax error that is causing this not to function correctly. There is a missing bracket in the statement.  
[sourceforge.net/forum/message.php?msg\_id=3665461](http://sourceforge.net/forum/message.php?msg_id=3665461)
