How to configure the TE120P card to use both voice and data?

Asterisk Asterisk Support
1

Dear Expert,
Could you please guide me how to configure the TE120P card to use both voice and data?

2

Dear All,
Does nobody know or we could not do that?

3

You cannot get data out of the TE cards. You need to split the voice and data before Asterisk gets it. Usually the provider will give you an Adtran or similar device and configure it for you.

4

These Digium cards are capable of doing this: TE12XP, TE2XXP, and TE4XXP(all Digium’s digital cards except the BRI card).

Here is a rough document on the process to do so:
docs.digium.com/misc/hdlc.txt

Also see ‘Data Modes’ here:
digium.com/en/docs/misc/signaling.php

The above links can be found here:
digium.com/en/supportcenter … ocs/TE120P

Example of /etc/zaptel.conf for split voice and data:
span=1,1,0,esf,b8zs
nethdlc=1-12
bchan=13-23
dchan=24