Hipath 4000 QSIG

Did anybobdy know, how to configure a Hipath PRI QSIG Connection with Asterisk’???

DIS-TDCSU:1-1-73-1,;
H500: AMO TDCSU STARTED
±----------------------- DIGITAL TRUNK (FORMAT=L) -------------------------+

DEV = S2CONN PEN = 1-01-073-1 TGRP = 3
PROTVAR = PSS1V2 INS = Y SRCHMODE = EVN
COTNO = 1 COPNO = 21 DPLN = 0
ITR = 0 COS = 10 LCOSV = 5
LCOSD = 1 CCT = DESTNO = 30
SEGMENT = 1 DEDSCC = DEDSVC = NONE
FACILITY = DITIDX = SRTIDX =
TRTBL = GDTR SIDANI = N ATNTYP = TIE
CBMATTR = NONE NWMUXTIM = 10 TCHARG = N
SUPPRESS = 0 DGTPR = CHIMAP = N
ISDNIP = 00 ISDNNP = 0
PNPL2P = PNPL1P = PNPAC =
TRACOUNT = 31 SATCOUNT = MANY NNO = 20
ALARMNO = 2 FIDX = 1 CARRIER = 1
ZONE = EMPTY COTX = 1 FWDX = 1
DOMTYPE = DOMAINNO = TPROFNO =
INIGHT = CCHDL =
UUSCCX = 16 UUSCCY = 8 FNIDX = 1
CLASSMRK = EC & G711 & G729OPT SRCGRP =
TCCID =
---------------------------------------------------------------------------
BCNEG = N BCGR = 1 LWPAR = 1
LWPP = 0 LWLT = 0 LWPS = 0
LWR1 = 0 LWR2 = 0
SVCDOM = VNNO =
BCHAN = 1 && 30

±--------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 30

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
REG-COT:1;
H500: AMO COT STARTED
ADD-COT: 1,PRI&RCL&XFER&ANS&CHRT&AEOD&KNOR&CEBC&
ITT&BRAR&CBBN&CBFN&FWDN&FNAN&COTN&IEVT&BSHT&
KNDI&KNEX&BLOC&LWNC&SATC&ATRS&TR6T&CECO&TSCS&
ICZL&ICZO&DFNN&CFOS&NLRD&AOCC&LINO&DSDL&CTLS&
TWDS&NTON;

AMO-COT -111 CLASS OF TRUNK FOR CALL PROCESSING
REGENERATE COMPLETED;
<reg-prode;
REG-PRODE;
H500: AMO PRODE STARTED
COPY-PRODE:PVCD,10;
COPY-PRODE:PD,31,PD14;
CHANGE-PRODE:PD,PD14,ORG,Y,;
CHANGE-PRODE:VARTAB,RES3,PD14,;

Hi!

Is CallerID Name working for you?

regards,
Johannes