Hi, My name is Raymund Mejía and I´m from Dominican Republic. I´m not a good English speaker but I ´ll try to explain my situation.
We ´ve a Digium TE 122 card (Actually in T1 Mode). This card is working in Trixbox 2.6.1.11 (asterisk 1.4). This version of trixbox is a little old and we need to change by Elaxtix 2.3 (Asterisk 1.6).
The problem is that this version of trixbox used Zaptel and the lastest version of Elaxtis use Dadhi. We have tried of make the configuration and searchig in a lot of forowns but the card is always in “Red alarm”.
We have all the configurations files that are working whit Zaptel in Trixbox 2.6.1.11. If it ´s possible we need some help to do the change.
All the help that you can give will be grateful.
Thanks in advance.
PD: These are our files config that are actualy working. If you need another file please tell me…
Zaptel.config
Zaptel Channels Configurations (zaptel.conf)
loadzone=us
defaultzone=us
span=1,0,0,d4,ami
e&m=1-24
Zapata.config
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=es
context=from-pstn
signalling=em_w
group=1
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
channel => 1-24
Thanks in advance.