Help NEEDED! Thanks

Well I am new to VOIP I need to know few thing can some one can guide and help me out setting ASTERISK for me

I Have these thing ready

  1. TDM400P (1FXS + 1FXO)
  2. Linksys PAP2T with VOIP Service of Acanac
  3. Normal Phone

Well can you tell me how can I setup all things I need to setup like I can make & receive call on computer, normal phone, and if I am out of home I can use which SIP software to make & receive calls, can please some guide me thanks…

I think already you have a server running asterisk with your TDM installed and configured… So:

In your chan_dadhi.conf create a context for your FXO channel for incoming calls, then create the dahdi device for your phone attached to FXS port something like this:

for FXO:
language=en ;or your language
busydetect=yes
busycount=4
echocancel=yes
echotrainnig=yes
usecallerid=yes
rxgain=0.0
txgain=0.0
group=1
context=incoming ; or your context
signalling=fxs_ks ;or fxs_ls
channel=>1

for FXS
language=en
context=phones
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
rxgain=0.0
txgain=0.0
signalling=fxo_ks
faxdetect=yes
callerid=“myphone”<200>
mohinterpret=default
mohsuggest=default
channel=>2

Then in your extensions.conf you need to define your context incoming and phones:

[incoming]
exten => s,1,Answer()
exten => s,n,Background(your IVR)
exten =>… your applications
include=>phones

[phone]
exten => 200,1,dial(dahdi/2) ; or cretae a macro here for more extensions
include => outgoing

[outgoing]
exten => _9XXXXX.,1,dial(dahdi/1/${exten:1}) ; create a rule for outgoing calls this is only an example.

For your PAP2T
create devices in your sip.conf and the Trunk provided by Acanac put in your sip.conf too. This for use the SIP provider in your outgoings calls.