Hi,
I have installed Digium wildcard TE1109 running with opensuse it is working fine and the LED is into Green color but when i type command lspci -v, nothing was showing about interface the output is
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Optiplex 755
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at fe40 [size=8]
I/O ports at fe50 [size=4]
I/O ports at fe60 [size=8]
I/O ports at fe70 [size=4]
I/O ports at fed0 [size=16]
I/O ports at ecb0 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ata_piix
03:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Device 79fe:0001
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dc00 [size=256]
Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Kernel driver in use: wcte11xp
when i issue command dahdi_tool
there it was showing my Digium card information.
I want to know what is the exact problem and how do i resolve it please provide me a best solution as soon as possible.
thanks & Regards,
Shakir.