# DEVICE\_STATE output is NOT\_INUSE with PJSIP conf **URL:** \ **Category:** Uncategorized\ **Created:** [March 6, 2016, 12:27pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883 "2016-03-06T12:27:08Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![liadbidani](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@liadbidani](https://community.asterisk.org/u/liadbidani)\ **Post date:** [March 6, 2016, 12:27pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/1 "2016-03-06T12:27:08Z")
Hello I want to detect my endpoint status I am using DEVICE\_STATE dialplan function with PJSIP I am getting return DEVICE\_STATE output NOT\_INUSE In old version I saw that callcounter parameter sould by YES Witch parameter I need to add to my PJSIP conf ? attached my PJSIP configuration [KAMnet\_TST1] type=endpoint transport=transport-udp1 context=app-router disallow=all allow=alaw dtmf\_mode=auto aors=KAMnet\_TST1 direct\_media=no [KAMnet\_TST1] type=aor contact=sip:10.25.153.150:5060;user=phone qualify\_frequency=10 [KAMnet\_TST1] type=identify endpoint=KAMnet\_TST match=10.25.153.150 ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [March 6, 2016, 2:33pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/2 "2016-03-06T14:33:27Z")
PJSIP does not have the same option, it’s always enabled. The only option which controls device state is device\_state\_busy\_at which controls the number of channels before the device is considered busy. ---
**Author:** ![liadbidani](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@liadbidani](https://community.asterisk.org/u/liadbidani)\ **Post date:** [March 6, 2016, 3:03pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/3 "2016-03-06T15:03:58Z")
> [@jcolp](#): > > it’s always enabled Hi Thank you for your answer!! If it’s always enabled like you told me Can you please help me to understand This is the function that I am using with the PSSIP conf that I send before: NoOp(\*\* PJSIP DEVICE STATE 2 = ${DEVICE\_STATE(PJSIP/KAMnet\_TST1)} **); This is what I get: "** PJSIP DEVICE STATE = NOT\_INUSE \*\*" I need to detect the status of the KAMnet\_TST1 endpoint thx ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [March 6, 2016, 3:15pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/4 "2016-03-06T15:15:16Z")
And what is the status of the endpoint? is it in use? Can you provide console output showing what it is doing and such? ---
**Author:** ![liadbidani](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@liadbidani](https://community.asterisk.org/u/liadbidani)\ **Post date:** [March 6, 2016, 3:30pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/5 "2016-03-06T15:30:55Z")
Hello Thank you for your quick answer 1. Attached output form console for ENDPOINT status with command : pjsip show aors # [root@vm-tann-n-01 ~]# vvvr Asterisk 13.2.0, Copyright © 1999 - 2014, Digium, Inc. and others. Created by Mark Spencer [markster@digium.com](mailto:markster@digium.com) Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘core show warranty’ for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type ‘core show license’ for details. Connected to Asterisk 13.2.0 currently running on vm-tann-n-01 (pid = 16351) vm-tann-n-01\*CLI\> pjsip show aors ``` Aor: Contact: ``` ========================================================================================= ``` Aor: KAMnet_TST1 0 Contact: KAMnet_TST1/sip:10.25.153.150:5060;user=phone Avail 2.314 ``` vm-tann-n-01\*CLI\> 1. Attached oupout form console for the DEVICE\_STATE – Executing [s@Dialer\_app:37] NoOp(“Local/s@Dialer\_context\_ael-00000000;2”, “\*\* PJSIP DEVICE STATE = NOT\_INUSE \*\*”) in new stack 2. Attached oupout from ael file: NoOp(\*\* PJSIP DEVICE STATE = ${DEVICE\_STATE(PJSIP/KAMnet\_TST1)} \*\*); Do you need more info ? Thx ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [March 6, 2016, 3:42pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/6 "2016-03-06T15:42:35Z")
I don’t see anything wrong with what you’ve provided. The endpoint is available. Is it actually in use in Asterisk? ---
**Author:** ![liadbidani](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@liadbidani](https://community.asterisk.org/u/liadbidani)\ **Post date:** [March 6, 2016, 6:24pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/7 "2016-03-06T18:24:35Z")
hello jcolp sorry i didn’t understand 100% your question ,and how to check if it in use? if i understod you good you will see a call was establish to the endpoint in the attached full outpout console do you need more info? Thx Liad # [root@vm-tann-n-01 ~]# vvvr Asterisk 13.2.0, Copyright © 1999 - 2014, Digium, Inc. and others. Created by Mark Spencer [markster@digium.com](mailto:markster@digium.com) Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘core show warranty’ for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type ‘core show license’ for details. Connected to Asterisk 13.2.0 currently running on vm-tann-n-01 (pid = 16351) – Attempting call on local/s@Dialer\_context\_ael for application wait(0.1) (Retry 1) – Called s@Dialer\_context\_ael – Executing [s@Dialer\_context\_ael:1] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, “\*\*\* Dialer\_service ael **") in new stack – Executing [s@Dialer\_context\_ael:2] Goto(“Local/s@Dialer\_context\_ael-00000001;2”, “Dialer\_app,s,begin”) in new stack – Goto (Dialer\_app,s,1) – Executing [s@Dialer\_app:1] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, "**\* Dialer\_service App\*\*\*\*”) in new stack – Executing [s@Dialer\_app:2] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_trace=Dialer\_start”) in new stack – Executing [s@Dialer\_app:3] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_Csrc=37163099”) in new stack – Executing [s@Dialer\_app:4] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_Cdest=039556744”) in new stack – Executing [s@Dialer\_app:5] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_Ctime=”) in new stack – Executing [s@Dialer\_app:6] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_FileName1=53\_132.wav”) in new stack – Executing [s@Dialer\_app:7] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_FileName2=N”) in new stack – Executing [s@Dialer\_app:8] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “CALLERID(num)=37163099”) in new stack – Executing [s@Dialer\_app:9] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_ringtime=80”) in new stack – Executing [s@Dialer\_app:10] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_DialPlanType=message”) in new stack – Executing [s@Dialer\_app:11] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_num\_id=347”) in new stack – Executing [s@Dialer\_app:12] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_nextdestnum=NONE”) in new stack – Executing [s@Dialer\_app:13] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_CampainID=53”) in new stack – Executing [s@Dialer\_app:14] GotoIf(“Local/s@Dialer\_context\_ael-00000001;2”, “0?15:17”) in new stack – Goto (Dialer\_app,s,17) – Executing [s@Dialer\_app:17] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_DIVERSION=sip:37163099@10.25.131.119;privacy=full;screen=no;reason=unconditional”) in new stack – Executing [s@Dialer\_app:18] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, “Finish if\_Dialer\_app\_143”) in new stack – Executing [s@Dialer\_app:19] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_CALL\_START\_TIME=20:01:23.251 GMT Sun Mar 06 2016”) in new stack – Executing [s@Dialer\_app:20] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_start\_time=2016-03-06 20:01:23.252”) in new stack – Executing [s@Dialer\_app:21] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_start\_t=20:01:23.252”) in new stack – Executing [s@Dialer\_app:22] GotoIf(“Local/s@Dialer\_context\_ael-00000001;2”, “1?23:33”) in new stack – Goto (Dialer\_app,s,23) – Executing [s@Dialer\_app:23] GotoIf(“Local/s@Dialer\_context\_ael-00000001;2”, “0?24:28”) in new stack – Goto (Dialer\_app,s,28) – Executing [s@Dialer\_app:28] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, “\*\* random 2 **") in new stack – Executing [s@Dialer\_app:29] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_channelname=KAMnet\_TST1”) in new stack – Executing [s@Dialer\_app:30] Set(“Local/s@Dialer\_context\_ael-00000001;2”, “\_\_PAsserted=sip:37270000;ss7-cpc=10;cpc=ordinary@10.25.194.161;user=phone”) in new stack – Executing [s@Dialer\_app:31] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, “Finish if\_if\_Dialer\_app\_144\_145”) in new stack – Executing [s@Dialer\_app:32] Goto(“Local/s@Dialer\_context\_ael-00000001;2”, “36”) in new stack – Goto (Dialer\_app,s,36) – Executing [s@Dialer\_app:36] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, “Finish if\_Dialer\_app\_144”) in new stack – Executing [s@Dialer\_app:37] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, " **PJSIP DEVICE STATE = NOT\_INUSE**") in new stack – Executing [s@Dialer\_app:38] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, " **PJSIP AOR = KAMnet\_TST1@@sip:10.25.153.150:5060;user=phone**") in new stack [Mar 6 20:01:23] ERROR[25738][C-00000001]: func\_pjsip\_contact.c:111 pjsip\_contact\_function\_read: Cannot call PJSIP\_CONTACT with an empty field name to query – Executing [s@Dialer\_app:39] NoOp(“Local/s@Dialer\_context\_ael-00000001;2”, "** PJSIP CONTACT = \*\*”) in new stack – Executing [s@Dialer\_app:40] DumpChan(“Local/s@Dialer\_context\_ael-00000001;2”, “”) in new stack # Dumping Info For Channel: Local/s@Dialer\_context\_ael-00000001;2: Info: Name= Local/s@Dialer\_context\_ael-00000001;2 Type= Local UniqueID= vm-tann-n-01.bgtehila.com-1457287283.4 LinkedID= vm-tann-n-01.bgtehila.com-1457287283.3 CallerIDNum= 37163099 CallerIDName= (N/A) ConnectedLineIDNum= (N/A) ConnectedLineIDName=(N/A) DNIDDigits= (N/A) RDNIS= (N/A) Parkinglot= Language= en State= Ring (4) Rings= 0 NativeFormat= (slin) WriteFormat= slin ReadFormat= slin RawWriteFormat= slin RawReadFormat= slin WriteTranscode= No ReadTranscode= No 1stFileDescriptor= -1 Framesin= 0 Framesout= 0 TimetoHangup= 0 ElapsedTime= 0h0m0s BridgeID= (Not bridged) Context= Dialer\_app Extension= s Priority= 40 CallGroup= PickupGroup= Application= DumpChan Data= (Empty) Blocking\_in= (Not Blocking) # Variables: PAsserted=sip:37270000;ss7-cpc=10;cpc=ordinary@10.25.194.161;user=phone channelname=KAMnet\_TST1 start\_t=20:01:23.252 start\_time=2016-03-06 20:01:23.252 CALL\_START\_TIME=20:01:23.251 GMT Sun Mar 06 2016 DIVERSION=sip:37163099@10.25.131.119;privacy=full;screen=no;reason=unconditional CampainID=53 nextdestnum=NONE num\_id=347 DialPlanType=message ringtime=80 FileName2=N FileName1=53\_132.wav Ctime= Cdest=039556744 Csrc=37163099 trace=Dialer\_start call\_id=347 filename2=N filename1=53\_132.wav accountcode=Dialer CallDest=039556744 CallSrc=37163099 ``` -- Executing [s@Dialer_app:41] Dial("Local/s@Dialer_context_ael-00000001;2", "PJSIP/039556744@KAMnet_TST1,80,G(Dialer_answer,s,begin)b(Dialer_app,add_header,1)") in new stack -- PJSIP/KAMnet_TST1-00000001 Internal Gosub(Dialer_app,add_header,1) start -- Executing [add_header@Dialer_app:1] Set("PJSIP/KAMnet_TST1-00000001", "__CallId2=") in new stack -- Executing [add_header@Dialer_app:2] GotoIf("PJSIP/KAMnet_TST1-00000001", "0?3:5") in new stack -- Goto (Dialer_app,add_header,5) -- Executing [add_header@Dialer_app:5] NoOp("PJSIP/KAMnet_TST1-00000001", "Finish if_Dialer_app_146") in new stack -- Executing [add_header@Dialer_app:6] Return("PJSIP/KAMnet_TST1-00000001", "") in new stack ``` == Spawn extension (app-router, s, 1) exited non-zero on ‘PJSIP/KAMnet\_TST1-00000001’ – PJSIP/KAMnet\_TST1-00000001 Internal Gosub(Dialer\_app,add\_header,1) complete GOSUB\_RETVAL= – Called PJSIP/039556744@KAMnet\_TST1 – PJSIP/KAMnet\_TST1-00000001 is making progress passing it to Local/s@Dialer\_context\_ael-00000001;2 – Local/s@Dialer\_context\_ael-00000001;1 is making progress vm-tann-n-01\*CLI\> Disconnected from Asterisk server Asterisk cleanly ending (0). Executing last minute cleanups You have new mail in /var/spool/mail/root [root@vm-tann-n-01 ~]# ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [March 6, 2016, 6:26pm UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/8 "2016-03-06T18:26:43Z")
The state will go to in use if a channel is currently established to the specified endpoint. At the time you are calling DEVICE\_STATE is this true? If not then it would show not in use. ---
**Author:** ![david551](https://avatars.discourse-cdn.com/v4/letter/d/3bc359/32.png) [@david551](https://community.asterisk.org/u/david551)\ **Post date:** [March 7, 2016, 9:00am UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/9 "2016-03-07T09:00:16Z")
In particular, I think what was being said is that Asterisk has no idea about the state of the actual device except for what it can deduce from its own state. If there is a connection to the device that is not from Asterisk, Asterisk will not count that towards an in-use state. ---
**Author:** ![liadbidani](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@liadbidani](https://community.asterisk.org/u/liadbidani)\ **Post date:** [March 8, 2016, 10:34am UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/10 "2016-03-08T10:34:22Z")
> [@liadbidani](#): > > qualify\_frequency Hello jcolp , david Thank you for your answers, and sorry for my late replay 1/ once I put the function DEVICE\_STATE after the answer of the remote site the status was INUSE 2/ BUT the main issue is that I want to know what is the status of the PEER\EndPoint before the dial command Why? I am checking with option the endpoint KAMnet\_TST1 with qualify\_frequency parameter When option is not replaying , KAMnet\_TST1 is Unavail and I need to make dial to other EndPoint (attached console) I need a function like : pjsip show aor KAMnet\_TST1 that will return me the status Unavail or Avail # ========================================================================================= ======================================= Attached Console when option is down================== vm-tann-n-01\*CLI\> pjsip show aor KAMnet\_TST1 ``` Aor: Contact: ``` ========================================================================================= ``` Aor: KAMnet_TST1 0 Contact: KAMnet_TST1/sip:10.25.153.150:5060;user=phone Unavail 0.000 ``` # ParameterName : ParameterValue authenticate\_qualify : false contact : sip:10.25.153.150:5060;user=phone default\_expiration : 3600 mailboxes : max\_contacts : 0 maximum\_expiration : 7200 minimum\_expiration : 60 outbound\_proxy : qualify\_frequency : 10 remove\_existing : false support\_path : false # ========================================================================================= ======================================= Attached Console when option is UP================== vm-tann-n-01\*CLI\> pjsip show aor KAMnet\_TST1 ``` Aor: Contact: ``` ========================================================================================= ``` Aor: KAMnet_TST1 0 Contact: KAMnet_TST1/sip:10.25.153.150:5060;user=phone Avail 2.344 ``` # ParameterName : ParameterValue authenticate\_qualify : false contact : sip:10.25.153.150:5060;user=phone default\_expiration : 3600 mailboxes : max\_contacts : 0 maximum\_expiration : 7200 minimum\_expiration : 60 outbound\_proxy : qualify\_frequency : 10 remove\_existing : false support\_path : false ---
**Author:** ![jcolp](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/jcolp/32/8848_2.png) [@jcolp](https://community.asterisk.org/u/jcolp)\ **Post date:** [March 8, 2016, 11:39am UTC](https://community.asterisk.org/t/device-state-output-is-not-inuse-with-pjsip-conf/65883/11 "2016-03-08T11:39:40Z")
The device state of the endpoint will change when the endpoint becomes unreachable. Should go to unavailable if I remember right. Additionally you could also just Dial the endpoint like normal and check the DIALSTATUS. If it is CHANUNAVAIL then the endpoint wasn’t there to dial.