# Connecting Endpoint To Asterisk On Vultr

**URL:** <https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777>\
**Category:** Asterisk SIP\
**Created:** [May 3, 2023, 2:22pm UTC](https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777 "2023-05-03T14:22:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![The\_Blode](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/the_blode/32/6506_2.png) [@The\_Blode](https://community.asterisk.org/u/The_Blode)\
**Post date:** [May 3, 2023, 2:22pm UTC](https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777/1 "2023-05-03T14:22:04Z")

</div>

Good afternoon all,

I’ve recently migrated to the cloud as I was facing a multitude of issues configuring Asterisk with Twilio on my home network due to being in a CGNAT prison. I have recently subscribed to a VPS service, called Vultr, and I’ve compiled Asterisk 16 on a Debian bullseye base and everything seems to be in place with regards to the installation. However, I’m not able to register my softphone with this new box. I was wondering if anybody could assist in any way possible.

My sip.conf configuration file is essentially the sample config provided by `make samples` with the sole addition of my one extension that I was testing with…which is as follows;

```auto
[100]
type=friend
context=internal_users
secret=[redacted]

```

I have performed some troubleshooting steps as per the Asterisk experts over on #asterisk on Libera.chat and I’ve done a tcpdump and I’ve also done a local wire capture as well but couldn’t get to the bottom of the actual issue. Both boxes (or both sides) are registering packets so there is communication happening…however, the phone registration isn’t taking place.

Appreciate any feedback. Thank you for your time.  
Martin.

---

<div class="post-metadata">

**Author:** ![TheMark](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/themark/32/4771_2.png) [@TheMark](https://community.asterisk.org/u/TheMark)\
**Post date:** [May 3, 2023, 5:36pm UTC](https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777/2 "2023-05-03T17:36:33Z")

</div>

hi  
I’ll recommend that you upgrade to asterisk 20 and change to chan\_pjsip  
as both asterisk 16 and chan\_sip is deprecated

---

<div class="post-metadata">

**Author:** ![The\_Blode](https://sea1.discourse-cdn.com/asterisk/user_avatar/community.asterisk.org/the_blode/32/6506_2.png) [@The\_Blode](https://community.asterisk.org/u/The_Blode)\
**Post date:** [May 4, 2023, 3:27pm UTC](https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777/3 "2023-05-04T15:27:31Z")

</div>

Good afternoon @TheMark

Thank you for the reply. I will indeed upgrade to PJSIP and to the current Asterisk 20 release when I have some time and observe if I have problems registering my softphone.

Thank you,  
Martin.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/asterisk/original/2X/4/475d0c889911cfb84ac4881ad6df8b523e3f9105.png) [@system](https://community.asterisk.org/u/system)\
**Post date:** [June 3, 2023, 3:28pm UTC](https://community.asterisk.org/t/connecting-endpoint-to-asterisk-on-vultr/96777/4 "2023-06-03T15:28:21Z")

</div>

Closed on June 3, 2023, 3:28pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.