# Completely move a call to a different Asterisk host

**URL:** <https://community.asterisk.org/t/completely-move-a-call-to-a-different-asterisk-host/46555>\
**Category:** Asterisk Support\
**Created:** [July 1, 2014, 5:53pm UTC](https://community.asterisk.org/t/completely-move-a-call-to-a-different-asterisk-host/46555 "2014-07-01T17:53:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![redwolf890](https://avatars.discourse-cdn.com/v4/letter/r/c0e974/32.png) [@redwolf890](https://community.asterisk.org/u/redwolf890)\
**Post date:** [July 1, 2014, 5:53pm UTC](https://community.asterisk.org/t/completely-move-a-call-to-a-different-asterisk-host/46555/1 "2014-07-01T17:53:38Z")

</div>

I’m running 1.8 and have a situation where certain calls I want to relocate completely to a special Asterisk host. Below is the complete context I have made so far:

```auto
[relocate-call]
  exten => s, 1, Dial(SIP/s@destination-host)
```

This does indeed get the call into routing on destination-host, but the problem is that because I used the Dial application, I’m just bridging. This means I’m leaving a channel from the call on the original Asterisk host.

Is there some way to _completely_ move a call over to a separate Asterisk host? Thanks.

---

<div class="post-metadata">

**Author:** ![david55](https://avatars.discourse-cdn.com/v4/letter/d/e19adc/32.png) [@david55](https://community.asterisk.org/u/david55)\
**Post date:** [July 1, 2014, 9:35pm UTC](https://community.asterisk.org/t/completely-move-a-call-to-a-different-asterisk-host/46555/2 "2014-07-01T21:35:06Z")

</div>

core show application transfer

Note that it is relatively fragile as it is little used.