Hello,
I would like to change the CPC (Calling Party Clear) signalling settings for my TDM400P.
I’m using BT and they use a different “Disconnect Clear Time” (their word for CPC) depending on the line. This affects whether Asterisk sees the user as hung up.
I know I can turn CPC on and off, but where do I set the timing for this?
are you loading the wctdm driver with the right settings ? have everything configured for UK ?
I only have one module on the card (FXO) that connects to my phone line.
modprobe wctdm opermode=UK
zaptel.conf:
fxsks=1
loadzone=uk
defaultzone=uk
zapata.conf:
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
usecallerid=yes
cidsignalling=v23
cidstart=polarity
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
sendcalleridafter=0
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
echotraining=800
rxgain=0.0
txgain=0.0
immediate=no
callerid=asreceived
busydetect=yes
busycount=6
ringtimeout=8000
faxdetect=incoming
group=0
channel=1