Call international phone numbers

I have Sip provider VoIPVoIP.com and set up Trunks & Outbounds.
Before going into FreePBX (4.211.64-9) I tested the connection with Zoiper on a Windows PC.
It worked OK … I was registered and it set up my sip phones.
When I call an international no 011468xxxxxx Sweden & Stockholm (according to syntax from VoIPVoIP) it worked also without any problem.
Then I tried to do the same thing in FreePBX / Asterisk … but could not call that no again.
I have not modified the no with dial ruels or pattern since it is the right syntax.
Appreciate any help.

Here is what I get from log:

[2014-01-13 17:41:55] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:1] ResetCDR(“SIP/101-00000018”, “”) in new stack
[2014-01-13 17:41:55] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:2] NoCDR(“SIP/101-00000018”, “”) in new stack
[2014-01-13 17:41:55] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:3] Progress(“SIP/101-00000018”, “”) in new stack
[2014-01-13 17:41:55] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:4] Wait(“SIP/101-00000018”, “1”) in new stack
[2014-01-13 17:41:56] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:5] Progress(“SIP/101-00000018”, “”) in new stack
[2014-01-13 17:41:56] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:6] Playback(“SIP/101-00000018”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
[2014-01-13 17:41:56] VERBOSE[4243][C-0000001d] file.c: – <SIP/101-00000018> Playing ‘silence/1.gsm’ (language ‘se’)
[2014-01-13 17:41:57] VERBOSE[4243][C-0000001d] file.c: – <SIP/101-00000018> Playing ‘cannot-complete-as-dialed.gsm’ (language ‘se’)
[2014-01-13 17:42:00] VERBOSE[4243][C-0000001d] file.c: – <SIP/101-00000018> Playing ‘check-number-dial-again.gsm’ (language ‘se’)
[2014-01-13 17:42:02] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:7] Wait(“SIP/101-00000018”, “1”) in new stack
[2014-01-13 17:42:03] VERBOSE[4243][C-0000001d] pbx.c: – Executing [011468xxxxxx@from-internal:8] Congestion(“SIP/101-00000018”, “20”) in new stack
[2014-01-13 17:42:03] WARNING[4243][C-0000001d] channel.c: Prodding channel ‘SIP/101-00000018’ failed
[2014-01-13 17:42:03] VERBOSE[4243][C-0000001d] pbx.c: == Spawn extension (from-internal, 011468xxxxxx, 8) exited non-zero on ‘SIP/101-00000018’
[2014-01-13 17:42:03] VERBOSE[4243][C-0000001d] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/101-00000018”, “”) in new stack
[2014-01-13 17:42:03] VERBOSE[4243][C-0000001d] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/101-00000018’

freepbx.org/forums/