hi all,
can i make a G.722 call over BRI ISDN with asterisk ?
i’m calling from a G.722 enabled device to asterisk to a sip phone (disallow=all allow=g722). But i hear only noise. any tip?
bri debug
[quote]PRI Span: 1 < Protocol Discriminator: Q.931 (8) len=37
PRI Span: 1 < TEI=127 Call Ref: len= 1 (reference 6/0x6) (Sent from originator)
PRI Span: 1 < Message Type: SETUP (5)
PRI Span: 1 < [a1]
PRI Span: 1 < Sending Complete (len= 1)
PRI Span: 1 < [04 02 88 90]
PRI Span: 1 < Bearer Capability (len= 4) [ Ext: 1 Coding-Std: 0 Info transfer capability: Unrestricted digital information (8)
PRI Span: 1 < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
PRI Span: 1 < [18 01 8a]
PRI Span: 1 < Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0
PRI Span: 1 < ChanSel: B2 channel
PRI Span: 1 < ]
PRI Span: 1 < [6c 0b 21 83 39 31 36 35 39 32 30 30 33]
PRI Span: 1 < Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
PRI Span: 1 < Presentation: Presentation allowed of network provided number (3) ‘916592003’ ]
PRI Span: 1 < [70 0a a1 39 31 33 34 30 31 32 30 32]
PRI Span: 1 < Called Number (len=12) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) ‘913401202’ ]
PRI Span: 1 – Making new call for cref 6
PRI Span: 1 Received message for call 0x7fcc78001810 on link 0x1a02a00 TEI/SAPI 65/0
PRI Span: 1 – Processing Q.931 Call Setup
PRI Span: 1 – Processing IE 161 (cs0, Sending Complete)
PRI Span: 1 – Processing IE 4 (cs0, Bearer Capability)
PRI Span: 1 – Processing IE 24 (cs0, Channel Identification)
PRI Span: 1 – Processing IE 108 (cs0, Calling Party Number)
PRI Span: 1 – Processing IE 112 (cs0, Called Party Number)
PRI Span: 1 q931.c:8281 post_handle_q931_message: Call 6 enters state 6 (Call Present). Hold state: Idle
Span 1: Processing event PRI_EVENT_RING
PRI Span: 1 q931.c:5477 q931_call_proceeding: Call 6 enters state 9 (Incoming Call Proceeding). Hold state: Idle
PRI Span: 1
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=7
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: CALL PROCEEDING (2)
PRI Span: 1 TEI=65 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=65 Just queued I-frame since in state 5(Awaiting establishment)
PRI Span: 1 TEI=65 Got UA
PRI Span: 1 Changing from state 5(Awaiting establishment) to 7(Multi-frame established)
PRI Span: 1 TEI=65 DL event: Q931_DL_EVENT_DL_ESTABLISH_CONFIRM(2)
PRI Span: 1 TEI=65 Transmitting N(S)=0, window is open V(A)=0 K=1
PRI Span: 1
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=7
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: CALL PROCEEDING (2)
PRI Span: 1 > [18 01 8a]
PRI Span: 1 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0
PRI Span: 1 > ChanSel: B2 channel
PRI Span: 1 > ]
PRI Span: 1 q931.c:5509 q931_alerting: Call 6 enters state 7 (Call Received). Hold state: Idle
PRI Span: 1
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=4
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: ALERTING (1)
PRI Span: 1 TEI=65 Just queued I-frame due to window shut
PRI Span: 1 TEI=65 Transmitting N(S)=1, window is open V(A)=1 K=1
PRI Span: 1
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=4
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: ALERTING (1)[/quote]
after answer:
[quote]PRI Span: 1 q931.c:5660 q931_connect: Call 6 enters state 8 (Connect Request). Hold state: Idle
PRI Span: 1
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=7
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: CONNECT (7)
PRI Span: 1 TEI=65 Transmitting N(S)=2, window is open V(A)=2 K=1
PRI Span: 1
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=7
PRI Span: 1 > TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent to originator)
PRI Span: 1 > Message Type: CONNECT (7)
PRI Span: 1 > [18 01 8a]
PRI Span: 1 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0
PRI Span: 1 > ChanSel: B2 channel
PRI Span: 1 > ]
PRI Span: 1
PRI Span: 1 < Protocol Discriminator: Q.931 (8) len=4
PRI Span: 1 < TEI=65 Call Ref: len= 1 (reference 6/0x6) (Sent from originator)
PRI Span: 1 < Message Type: CONNECT ACKNOWLEDGE (15)
PRI Span: 1 Received message for call 0x7fcc78001810 on link 0x1a02a00 TEI/SAPI 65/0
PRI Span: 1 q931.c:8484 post_handle_q931_message: Call 6 enters state 10 (Active). Hold state: Idle
Span 1: Processing event PRI_EVENT_CONNECT_ACK[/quote]