# BLF with Snom 320

**URL:** <https://community.asterisk.org/t/blf-with-snom-320/7427>\
**Category:** Asterisk Support\
**Created:** [June 29, 2006, 4:17pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427 "2006-06-29T16:17:55Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![swiftreach](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@swiftreach](https://community.asterisk.org/u/swiftreach)\
**Post date:** [June 29, 2006, 4:17pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/1 "2006-06-29T16:17:55Z")

</div>

Having looked estensively for details about using BLF and Snom, i haven’t been able to get it to work. I’m trying to monitor the status of ext.114 from ext.117.

I have added the following to my sip.conf:  
[114]  
username=114  
type=friend  
secret=114  
record\_out=On-Demand  
record\_in=On-Demand  
qualify=no  
port=5060  
nat=never  
mailbox=114@default  
host=dynamic  
dtmfmode=rfc2833  
context=from-internal  
subscribecontext=from-internal  
notifyringing=yes  
canreinvite=no  
callerid=“Amy” \<114\>

[117]  
username=117  
type=friend  
secret=117  
record\_out=On-Demand  
record\_in=On-Demand  
qualify=no  
port=5060  
nat=never  
mailbox=117@default  
host=dynamic  
dtmfmode=rfc2833  
context=from-internal  
subscribecontext=from-internal  
notifyringing=yes  
canreinvite=no  
callerid=“Jeff” \<117\>

And added to extensions.conf:  
exten =\> 117,hint,SIP/110  
exten =\> 117,hint,SIP/112  
exten =\> 117,hint,SIP/114  
exten =\> 117,hint,SIP/115  
exten =\> 117,hint,SIP/117  
exten =\> 117,1,Macro(exten-vm,117@default,117)  
exten =\> ${VM\_PREFIX}117,1,Macro(vm,117)  
exten =\> 114,1,Macro(exten-vm,114@default,114)  
exten =\> ${VM\_PREFIX}114,1,Macro(vm,114)

On my Snom 320 i have the function key defined as follows:  
Context Type Number  
[117@192.168.5.20](mailto:117@192.168.5.20) Extension 114

Something is missing, since my Snom light just stays light up.

Thanks for all help…

---

<div class="post-metadata">

**Author:** ![Teran](https://avatars.discourse-cdn.com/v4/letter/t/bbce88/32.png) [@Teran](https://community.asterisk.org/u/Teran)\
**Post date:** [June 29, 2006, 4:58pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/2 "2006-06-29T16:58:40Z")

</div>

What application version do you have on the Snom 320?

When you hit SAVE on the Function Keys page on the Snom it should convert 114 to sip:114@192.168.5.20 otherwise you should enter it manually.

If you type ‘show hints’ at the CLI prompt does it show your hints as being registered? Does it show any phones being subscribed to that hint?

---

<div class="post-metadata">

**Author:** ![swiftreach](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@swiftreach](https://community.asterisk.org/u/swiftreach)\
**Post date:** [June 29, 2006, 5:11pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/3 "2006-06-29T17:11:55Z")

</div>

Here is the version for my phone: snom320-SIP 6.2  
When I put 114 into the number field it does not convert it. i tried it manually that way, but with the same results.

I will look into CLI “show hints” and will post the results.

---

<div class="post-metadata">

**Author:** ![swiftreach](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@swiftreach](https://community.asterisk.org/u/swiftreach)\
**Post date:** [June 29, 2006, 5:17pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/4 "2006-06-29T17:17:52Z")

</div>

Here is the result of “show hints”:

asterisk1_CLI\> show hints  
asterisk1_CLI\>  
-= Registered Asterisk Dial Plan Hints =-  
117 : SIP/110 State 0

---

<div class="post-metadata">

**Author:** ![Teran](https://avatars.discourse-cdn.com/v4/letter/t/bbce88/32.png) [@Teran](https://community.asterisk.org/u/Teran)\
**Post date:** [June 29, 2006, 6:12pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/5 "2006-06-29T18:12:03Z")

</div>

I think your hint in extensions.conf should read as

exten =\> 114,hint,SIP/114  
exten =\> 117,hint,SIP/117

Also, make sure you have

```
Support broken Registrar: Off

```

set on your phone under the Line/Sip settings

Here is a line from ‘show hints’ on my system:  
407 : SIP/407 State:Idle Watchers 4

If the hints was set up properly and no one is subscribed to that hint then Watchers would be 0.

---

<div class="post-metadata">

**Author:** ![swiftreach](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@swiftreach](https://community.asterisk.org/u/swiftreach)\
**Post date:** [June 30, 2006, 12:40pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/6 "2006-06-30T12:40:31Z")

</div>

My problem must be with the “subscribecontext” then, since when i “show hints” everyone has a 0 for watchers. Is there anything special that needs to be added for the “subscribecontext”?

Up above you can see what i have for each extension and below is the context for “from-internal”:

[from-internal]  
exten =\> 150,1,Goto(from-XXXXXX,s,1)  
;allow phones to use applications  
include =\> app-directory  
include =\> app-dnd  
include =\> app-callforward  
include =\> app-callwaiting  
include =\> app-messagecenter  
include =\> app-calltrace  
include =\> parkedcalls  
include =\> from-internal-custom  
;allow phones to dial other extensions  
include =\> ext-fax  
include =\> ext-local  
include =\> ext-group  
include =\> ext-queues  
include =\> ext-zapbarge  
include =\> ext-meetme  
include =\> ext-record  
include =\> ext-test  
;allow phones to access trunks  
include =\> outbound-allroutes  
exten =\> s,1,Macro(hangupcall)  
exten =\> h,1,Macro(hangupcall)

I’m at a loss here…

---

<div class="post-metadata">

**Author:** ![Teran](https://avatars.discourse-cdn.com/v4/letter/t/bbce88/32.png) [@Teran](https://community.asterisk.org/u/Teran)\
**Post date:** [June 30, 2006, 7:25pm UTC](https://community.asterisk.org/t/blf-with-snom-320/7427/7 "2006-06-30T19:25:11Z")

</div>

This is two of my extensions registering their hints:

exten =\> 201,hint,SIP/201  
exten =\> 203,hint,SIP/203

If I have a third phone, say ext. 205, then I would setup the Function Keys on that Snom to read:

205@myserverip Extension sip:201@myserverip  
205@myserverip Extension sip:203@myserverip

where myserverip is either the IP address of my server or a qualified name. Depending on the version of the Snom software the 205@myserverip might also be ‘Active’ and Extension might be ‘Destination’.
