Hi,
I am trying to install Astlinux ( Asterisk + Linux) on 4 GB USB drive
to overcome problems with Asterisk for Windows ( poor sound quality in audio channel), as advised by MrFidget.
As my USB drive is 4 GB I am asked if I want to ( ) 2 GB overwrite limit
selecting yes or no opens DOS windows as below or flash opens and closes DOS window.
Any idea ?
=========================================
Manuel Kasper mk@neon1.net
( ) 2GB overwrite problem
physdiskwrite v0.5.2
Searching for physical drives…
Which disk do you want to drive? <0…0>
Hi,
trying to load Astlinux image from HD to USB 4 GB drive (formatted)
I am asked if I want to overcome 2GB limit , selecting yes or no
opens DOS window
with the above text
Searching for physical drives…
Which disk do you want to drive? <0…0>
What should I enter in command line as 4 GB USB drive is denoted as G in
PhysGUI interface,
is G ok ?
Selecting : ( x) Remove 2GB restriction
DOS windows opens and closes immediately.
Not selecting ( ) Remove 2GB restriction
==========
DOS window
Which disk do you want to write? <0…0> G
That disk is larger than 2 GB ( . Please choose another
one.
Which disk do you want to write? <0…0>
So should I partition G USB 2GB drive into 2 x 2GB partitions first ?
What format is ok for partition holding image ?
and what for send partition ?
Darius