Asterisk 1.8 SPA3102 dahdi won't start

Asterisk Asterisk Support
1

I’m trying to set up Asterisk 1.8 on OpenSUSE 11.3 to work with a Cisco SPA3102. However, when I try to start Asterisk, it complains about a dahdi error. When I enter service dahdi start, I get an error message:

firewall:~ # service dahdi start
Loading DAHDI hardware modules:
wct4xxp: error wcte12xp: error wct1xxp: error wcte11xp: error wctdm24xxp: error wcfxo: error wctdm: error wcb4xxp: error wctc4xxp: error xpp_usb: error
Error: missing /dev/dahdi!

Also, there is no /etc/dahdi directory.

What am I missing. Also, while I have experience with VoIP PBX, this is my first attempt with Asterisk.

tnx jk

2

DAHDI likely wasn’t installed correctly.

What’s the Asterisk CLI error?

If you’d like Asterisk to ignore DAHDI, then you can add:

noload => chan_dahdi.so

to the:

/etc/asterisk/modules.conf

file.

Cheers.