15 sec delay for passing from DAHDi/g0 to Dahdi/i1

1

i have a really big problem ,for all my outgoing calls i have to wait like 30 seconds between my dial and moment i get carrier .

i don’t know what’s the issue .

[Apr 16 12:00:11] VERBOSE[3692] app_mixmonitor.c: == Begin MixMonitor Recording SIP/7003-00000000
[Apr 16 12:00:11] DEBUG[3691] sig_pri.c: sig_pri_request 1
[Apr 16 12:00:11] DEBUG[3691] sig_pri.c: CALLER NAME: NUM: xxxxxxxxxx
[Apr 16 12:00:11] VERBOSE[3691] sig_pri.c: – Requested transfer capability: 0x00 - SPEECH
[Apr 16 12:00:11] VERBOSE[3691] app_dial.c: – Called DAHDI/g0/0649441145
[Apr 16 12:00:26] VERBOSE[3691] app_dial.c: – DAHDI/i1/0649441145-1 is proceeding passing it to SIP/7003-00000000
[Apr 16 12:00:30] VERBOSE[3691] app_dial.c: – DAHDI/i1/0649441145-1 is making progress passing it to SIP/7003-00000000
[Apr 16 12:00:37] VERBOSE[3691] chan_dahdi.c: – Hungup ‘DAHDI/i1/0649441145-1’
[Apr 16 12:00:37] VERBOSE[3691] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on ‘SIP/7003-00000000’ in macro ‘dialout-trunk’

Many thanks in advance.

2

You will need to provider the protocol trace (probably layer 4 and above) for the outgoing line.

3

Thank you so much David ,

i’m a newbie at asterisk world , how to trace this transaction ( should i use Wireshark ) .

I forget to mention that i’m using Elastix

4

I’m more familiar with SIP. I wouldn’t have thought wireshark would have known about the telecoms card, but I could be wrong.

5

You have a FreePBX installation? If yes change g0 to g11 and try again.